Arduino Uno Rev3SKU: ARD132D2P

$29.90
Qty: Add to Wish List
The Arduino Uno Rev3 is a microcontroller board based on the ATmega328 (datasheet). It has 14 digital input/output pins (of which 6 can be used as PWM outputs), 6 analog inputs, a 16 MHz crystal oscillator, a USB connection, a power jack, an ICSP header, and a reset button.
 
It contains everything needed to support the microcontroller; simply connect it to a computer with a USB cable or power it with a AC-to-DC adapter or battery to get started.
 
The Uno differs from all preceding boards in that it does not use the FTDI USB-to-serial driver chip. Instead, it features the Atmega8U2 programmed as a USB-to-serial converter."Uno" means one in Italian and is named to mark the upcoming release of Arduino 1.0. 
 
The Uno and version 1.0 will be the reference versions of Arduno, moving forward. The Uno is the latest in a series of USB Arduino boards, and the reference model for the Arduino platform.
 
  • Microcontroller ATmega328
  • Operating voltage 5V
  • Input voltage (recommended) 7-12V
  • Input voltage (limits) 6-20V
  • Digital I/O pins 14 (of which 6 provide PWM output)
  • Analog input pins 6
  • DC current per I/O Pin 40 mA
  • DC current for 3.3V Pin 50 mA
  • Flash memory 32 KB of which 0.5 KB used by bootloader
  • SRAM 2 KB
  • EEPROM 1 KB
  • Clock speed 16 MHz
 

 

 

 

Documents

Please visit our wiki page for more info about this product. It will be appreciated if  you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our forum.

Overview

ArduinoShenzhen 2U


Weight: 20 g

Distributors in North America
United States
Canada
Mexico
Puerto Rico
Honduras

Want to know more about the soul of LinkIt ONE? MediaTek Labs provides LinkIt SDK for Arduino, with which you develop Sketches in Arduino IDE that you run on LinkIt ONE. There is a Developer’s Guide that will help you get started with the SDK and LinkIt APIs, as well as an online API reference. And when you come to taking your prototype towards deployment, there is a Hardware Reference Design package containing schematic, layout and datasheets to help you create your own product using Seeed Studio’s Fusion PCBA Service.

To find out more check out the LinkIt section on the MediaTek Labs site and register here or check out the resources below.

Recommended Products

Recent History

Arduino Uno Rev3$29.90