Thank you for your feedback!
We will cherish every piece of your feedback and respond as fast as we can if necessary.
Once your suggestion gets adopted, an equal value coupon will be sent to thank you.
UartSBee V4 is a compact USB to serial adapter equipped with BEE (20pin 2.0mm) sockets. With integrated FT232 IC, It can be used for programming or communicating with MCU applications. On the other hand, you may connect your PC to various wireless applications via the BEE compatible modules.
Features
Reset button for BEE modules
3.3V and 5V dual power output
3.3V and 5V IO compatible
USB 2.0 protocol
BitBang mode ready
Application
USB Serial adapter to communicate with TTL/CMOS level Serial devices
Programmer for Arduino and compatible boards
USB Adapter of BEE modules for PC wireless function
Documents
Please visit ourwiki pagefor more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to ourforum.
Can I use these to Program my Seeeduino Wirelessly?
It is not clear to me if I can use UartSBee and RF XBee to remotely program and run my Seeeduino board. Is this possible? If it is possible what do I need to purchase? Thanks
Hi Doug McFarlhand.We have done this DIY, so you can use UartSBee and RFbee (Bluetooth Bee is ok).Might we can post this DIY process on our forum.
using uartsbee to flash firmware on bt bee standalone
Hi all,
I have just bought this board in order to flash firmware for my bluetooth bee standalone board.
However, i am not sure how to configure the avrdude to work with uartsbee.
Would you please advise ? What is the programmer to use ? do i need any additional drivers (i am running on ubuntu 12).
Thanks.
Lenny
Hello, you could directly use Arduino IDE to program bluetooth bee while it connecting to your PC with a USB cable.
The wiki for the 4.0 model is just a copy of the wiki for the 3.1 with a different model pic at the top. Any chance this will get updated? According to the board's legend layer, it has been over a year.
Hi Clinton , firstly thanks for your feedback . Secondly ,very sorry for the inconvenience brought , i have contacted with the engineer , and we will update it soon .
Can you provide a picture of how UarsBee 4.0 should connect to the Seeduino Stalker 2.0. Also, any suggestions of cables to do that? I bought the 10 pin flat ribbon cable and it does not fit on the 4.0.
the connection way:
Seeeduino Stalker UartSBee
USB5V ↔ VCC
RXD ↔ TXD
TXD ↔ RXD
GND ↔ GND
DTR ↔ DTR
or you can scan this webside to find more about this connection.
http://www.seeedstudio.com/wiki/Seeeduino_Stalker_v2.1#Step_1:_Acquiring_the_Hardware
0 items
Jacket Chueng
