XC2C64A CoolRunner-II CPLD development board

SKU: TES34053P
$15.00
Qty:
Add to Wish List
Ship from:

In stock
 
Ever get stuck choosing the right logic chip combination or voltage level translator? Give up the hunt and create your own custom logic chip. CPLDs can give you the logic you need, with the pinout you want, while saving board space and board revisions.
 
The CoolRunner-II XC2C CPLD has two separate banks of pins that can operate at different voltages, internal pull-up resistors, and pin keepers.  This development board from Dangerous Prototypes will help you build your first custom logic chip using simple schematic entry, Verilog, or VHDL.
  • XC2C64A CPLD with 64 macrocells
  • On-board 1.8volt supply for the core
  • On-board 3.3volt supply for pins
  • Separate pin banks can be operated at different voltages (1.2volt to 3.3volt)
  • Selectable 1.8volt, 3.3volt, and external supply for each pin bank
  • LEDs for output
  • Push button for input
  • Populated JTAG header
  • Easy to program with the Bus Pirate and Bus Blaster
  • Open source (CC-BY-SA)
Resources
If you encounter any problems when using this product, here is the forum from which you can get the technical support.

Want to know more about the soul of LinkIt ONE? MediaTek Labs provides LinkIt SDK for Arduino, with which you develop Sketches in Arduino IDE that you run on LinkIt ONE. There is a Developer’s Guide that will help you get started with the SDK and LinkIt APIs, as well as an online API reference. And when you come to taking your prototype towards deployment, there is a Hardware Reference Design package containing schematic, layout and datasheets to help you create your own product using Seeed Studio’s Fusion PCBA Service.

To find out more check out the LinkIt section on the MediaTek Labs site and register here or check out the resources below.

Distributors in North America
United States
Canada
Mexico
Puerto Rico
Honduras

Recommended Products