Seeedstudio Forum

Electronics can be art.
It is currently Tue Oct 21, 2014 11:05 pm




Post new topic Reply to topic  [ 291 posts ]  Go to page 1, 2, 3, 4, 5 ... 30  Next
Author Message
 Post subject: DSOQuadV2.6 RESOURCE(Update 2012/04/12)
PostPosted: Fri Apr 15, 2011 10:13 am 
Offline
Sergeant
Sergeant

Joined: Tue Jan 25, 2011 2:04 pm
Posts: 248
Honor: 0.00
Points: 249.00 Points
DSO Quadv2.6Manual released..Include the basic operation and upgrade methed. and firmware include :logo related file, FPGA logic file, App.hex and Sys.hex.
NOTE: firmware for HWv2.2 is not compatible with HWv2.6 . DO NOT upgrade HWv2.6 with firmware for HWv2.2

Latest firmware available(2012/04/12):
APP: 2.53
SYS: 1.52
FPGA: 2.61
logo: logo file , do not need to upgrade as you do not want to.
And, a new designer has joined to design the UI. The following firmware available:(2012/02/14) )
APP:AP3_P100
please ref the wiki to track the latest firmware:
http://garden.seeedstudio.com/index.php ... mware_List

Firmwares that needs to be installed into the DSO Quad:
1. CFG_FPGA.ADR + VxxxFPGA.bin. The two files for fpga logic, you need to install the .ADR file and then the .bin file.
2. logo_00B.ADR + logo_001.bin. the logo files, need to install the .ADR file and then the .bin file.
3. APP_Bxxx.hex, the app firmware.
4. SYS_Bxxx.hex, the sys firmware.
when you want to update you firmware, for example, you want to update the app firmware to v2.35 to corrrect the calibration error ,you just need to update the app ,to 2.35, as there is no update in the sys firmware.
you should do:
1. download the app 2.35 zip from below lines.
2.upzip the app, you would see app_B235.hex and DSO Quad Calibration .pdf.
3. connect the Quad to PC via USB , and power Quad with the ">||"pressed.
4.copy the App_B235 to the virtual disk . the virtual disk will auto reset and this file changes to :APP_B235.RDY.
5. Update finished. calibrate the Quad as the DSO Quad Calibration .pdf

updated issue:
1.sys1.34 and .app2.32 can be download now, Please upgrade your DSO QuadHWv2.6 ASAP (2011/4/19)
2.Manual 0.91B added(2011/4/22)
3.Manual to calibrate the probes added(2011/4/25)
4.App 2.33 added(2011/4/27)
5.App 2.35 added,the calibration error been corrected.(2011/5/16)
6.FPGA_V2.5 added(2011/5/18)
7.Manual 0.92B added(2011/5/30)
8.Sys1.37 added(2011/06/01)
9.App2.43 added(2011/06/07)
10.Sys1.41 added(2011/06/07)
11 App2.45 added(2011/06/16)
12 App2.45(b) added(2011/06/17)
13 App2.50 and Sys1.50 added(2011/07/11)
14 New UI ,just for testing!!(2011/07/22)
15 app252/sys151/fpga2.6 released..
16.AP3_P100 released, this is not a offical Version
17. APP2.53 and Sys1.52 released(2012/04/12)


Attachments:
SYS_B152.zip [21.03 KiB]
Downloaded 7141 times
File comment: Debug the FRQ, TH and TL in Menu.c and Funtion.c
APP_B253.zip [45.57 KiB]
Downloaded 7241 times
File comment: UI improvement.
AP3_P100.rar [48.99 KiB]
Downloaded 4956 times
File comment: fpga261 file, please first install the .ADR file , and then the .BIN file
FPGA261.zip [23.31 KiB]
Downloaded 10039 times
File comment: sys151, must be upgraded with the fpga261 file
SYS_B151.zip [20.95 KiB]
Downloaded 3540 times
File comment: App2.52. mush be upgraded with the fpga261 file.
AP1_B252.zip [32.27 KiB]
Downloaded 3357 times
File comment: New UI ,just for testing ...if you do not like something that is not finished yet , please do not try.
DS203 new firmware testing.rar [52.85 KiB]
Downloaded 1740 times
File comment: 1.Re-write the fat12 file system (FAT12.c,ASM.s)
2.Modified read/write flash functions(Memory.c, EXT_flash.c)
you need to format the Quad disk after upgrading as http://www.seeedstudio.com/forum/viewtopic.php?f=22&t=2112

SYS_B150.zip [20.46 KiB]
Downloaded 2777 times
File comment: 1. re-write the file.c and asm.s based on the new fat32 file sys.
2. Modified the TH TL measure bugs in Menu.c
3.Optimize the measuring related functions (Menu.c ,Function.c,Calibrat.c)
4. Modified the bugs in triggering with pulse width.
you need to format the Quad disk after upgrading as http://www.seeedstudio.com/forum/viewtopic.php?f=22&t=2112

APP_B250.zip [30.65 KiB]
Downloaded 2830 times
File comment: modifyed the bug in calibration channel B in app245
APP_V245(b).rar [35.74 KiB]
Downloaded 1889 times
File comment: 1. Modified the bug in saving the setting
2. Modified the bug in saving the calibration data

APP_V245.rar [35.74 KiB]
Downloaded 1276 times
File comment: 1. Read/Write file system functions added(DOSFS.C)
2. Debug the bugs in read BUFF(DOSFS.C)

sys141.rar [22.83 KiB]
Downloaded 1761 times
File comment: 1. Auto calibration added(calibrat.c,process.c,function.c)
2.frequency and duty measure added(Process.c,Menu.c)
3. Function to export the data in .CSV added(Main.c,files.c Menu.c)
4.Must be used with SysV1.40 or above.

App_V243.rar [35.44 KiB]
Downloaded 2057 times
File comment: 1. debug the saving error that may led to a black screen in sys1.34
2. dubug the function to set the offset to CH_A and CH_B

SYS_B137.rar [18.26 KiB]
Downloaded 758 times
File comment: 1. how to calibrate the probe added.
2. how to calibrate the waveform added

DSO Quad v2 6 Manual 0.92b.rar [2.51 MiB]
Downloaded 13926 times
File comment: 1. function to set sample depth added.
2. function to set trigger delay added

FPGA_V2.5.zip [23.59 KiB]
Downloaded 1357 times
File comment: app 2.35, the calibration error been corrected.
App2.35 and Quad calibration.zip [33.36 KiB]
Downloaded 1264 times
APP2.33.zip [24.46 KiB]
Downloaded 992 times
How to adjust the C to calibrate the probes.zip [74.25 KiB]
Downloaded 2752 times
File comment: DSOQuadV2.6Manual0.91B
DSOQuadV2.6Manual0.91B.zip [2.57 MiB]
Downloaded 10363 times
File comment: SYS1.34 and APP2.32 , please upgrade all the files include FPGA file(2011/04/19)
SYS1.34 AND APP2.32.zip [63.14 KiB]
Downloaded 1209 times
File comment: module to save the waveform to .bmp file or .dat file
Save wave for DSOQuad.rar [4.06 KiB]
Downloaded 4421 times
File comment: QuadV2.6 hardware SCH
DS203V2 6_SCH.rar [62.06 KiB]
Downloaded 19623 times
File comment: .sys 1.31 and .app 2.30
Quad firmware.rar [58.65 KiB]
Downloaded 1844 times


Last edited by HugeMan on Fri Apr 22, 2011 3:16 pm, edited 6 times in total.
Top
 Profile  
 
 Post subject: Re: DSOQuadV2.6Manual
PostPosted: Fri Apr 15, 2011 10:50 am 
Offline
Sergeant
Sergeant

Joined: Tue Jan 25, 2011 2:04 pm
Posts: 248
Honor: 0.00
Points: 249.00 Points
APP(V2.32) sourcecode released:
SYS(V1.34) sourcecode released:
APP(V2.35) sourcecode released:
FPGA(V2.5) sourcecode released:

and , for some reason, the sourcecode git change
from:
https://github.com/Seeed-Studio/DSOQuad ... SourceCode
to :
https://github.com/Seeed-Studio/DSOQuad_SourceCode


Top
 Profile  
 
 Post subject: Re: DSOQuadV2.6Manual
PostPosted: Mon Apr 18, 2011 2:41 am 
Offline
Newbie
Newbie

Joined: Sun Apr 17, 2011 11:22 pm
Posts: 1
Honor: 0.00
Points: 1.00 Points
Is there new firmware? :oops:


Top
 Profile  
 
 Post subject: Re: DSOQuadV2.6 RESOURCE(Update 2011/4/19)
PostPosted: Tue Apr 19, 2011 6:32 pm 
Offline
Soldier
Soldier

Joined: Wed Feb 09, 2011 4:31 am
Posts: 68
Honor: 0.00
Points: 69.00 Points
Can we know what SYS1.34 and APP2.32 change to the previous version?


Top
 Profile  
 
 Post subject: Re: DSOQuadV2.6 RESOURCE(Update 2011/4/19)
PostPosted: Tue Apr 19, 2011 9:47 pm 
Offline
Corporal
Corporal

Joined: Fri Mar 18, 2011 11:45 pm
Posts: 106
Honor: 0.00
Points: 106.00 Points
A change log would be usefull when upgrading Firmware so we know what to expect :)


Top
 Profile  
 
 Post subject: Re: DSOQuadV2.6 RESOURCE(Update 2011/4/19)
PostPosted: Mon Apr 25, 2011 6:49 am 
Offline
Corporal
Corporal

Joined: Wed Oct 21, 2009 12:24 pm
Posts: 171
Honor: 0.00
Points: 171.00 Points
I can not upgrade on a Mac, if I boot the device in upgrade mode it continually resets itself so that disk is disappearing faster than I can copy to it. Is there another way, DFU-util or dfuse that I can use.

So I found a Windoze box and it is clear now what the problem is, and it should be simple to fix. Are you interested in fixing it or should I go off and do it myself? I hate seeing forked pools, but this is very annoying. We got the dfuse tool working for the previous mode, not I but others did that which gave us the ability to update from many different platforms. I am not excited by going backwards here.


Top
 Profile  
 
 Post subject: Re: DSOQuadV2.6 RESOURCE(Update 2011/4/19)
PostPosted: Mon Apr 25, 2011 9:27 am 
Offline
Sergeant
Sergeant

Joined: Tue Jan 25, 2011 2:04 pm
Posts: 248
Honor: 0.00
Points: 249.00 Points
rich wrote:
I can not upgrade on a Mac, if I boot the device in upgrade mode it continually resets itself so that disk is disappearing faster than I can copy to it. Is there another way, DFU-util or dfuse that I can use.

So I found a Windoze box and it is clear now what the problem is, and it should be simple to fix. Are you interested in fixing it or should I go off and do it myself? I hate seeing forked pools, but this is very annoying. We got the dfuse tool working for the previous mode, not I but others did that which gave us the ability to update from many different platforms. I am not excited by going backwards here.

The DSOQuad HWv2.6 need to upgrade the app/sys/FPGA as the way in the manual because of the BIOS that embeded in the STM32 when Quad was produced . So, DFU-util or dfuse can not be used unless you embeded the related BIOS to the STM32.
as on the Mac, it will be grateful for you sharing your experience that we really lacked .I expececd your detailed introduction


Top
 Profile  
 
 Post subject: Re: DSOQuadV2.6 RESOURCE(Update 2011/4/19)
PostPosted: Tue Apr 26, 2011 12:17 pm 
Offline
Corporal
Corporal

Joined: Wed Oct 21, 2009 12:24 pm
Posts: 171
Honor: 0.00
Points: 171.00 Points
HugeMan wrote:
The DSOQuad HWv2.6 need to upgrade the app/sys/FPGA as the way in the manual because of the BIOS that embeded in the STM32 when Quad was produced . So, DFU-util or dfuse can not be used unless you embeded the related BIOS to the STM32.
as on the Mac, it will be grateful for you sharing your experience that we really lacked .I expececd your detailed introduction


Please tell me what you need to know and I will write it up. On Linux or a Mac the upgrade disk disappears completely every time it checks for new files. (about every second or two) This interrupts copies, or truncates them, and umounts the drive about as fast as the OS can mount it. This makes it so that you can't copy anything reliably. I even tried to write a script to detect the disk had reappears and then did an ordered copy of the files, but that failed as well. Windows seems to tolerate the disk disappearing for a moment, but Linux and Mac os treat it as if the drive was unplugged while active. So the experience on Windows is good, but it is unusable on Mac os or Linux, even from a program trying to interact with it.


Is this what you need or is it something else? I am willing to help, but it is hard to know what someone doesn't know. If I were going to fix it, I would change the embedded code to wait for a button press before disconnecting to check for new/changed files. That way you could succeed on copying the files on, before the system sees the disk go away as it now does.


Top
 Profile  
 
 Post subject: Re: DSOQuadV2.6 RESOURCE(Update 2011/4/27)
PostPosted: Wed Apr 27, 2011 1:05 pm 
Offline
Newbie
Newbie

Joined: Wed Apr 27, 2011 1:02 pm
Posts: 4
Honor: 0.00
Points: 4.00 Points
Hi

We just received our engineering sample today.
As suggested by the developers, we upgraded the APP to 2.33 and the other SYS f/w updates.

However, now the CALIBRATE button does not work.

Please advice.


Top
 Profile  
 
 Post subject: Re: DSOQuadV2.6 RESOURCE(Update 2011/4/27)
PostPosted: Wed Apr 27, 2011 1:41 pm 
Offline
Sergeant
Sergeant

Joined: Tue Jan 25, 2011 2:04 pm
Posts: 248
Honor: 0.00
Points: 249.00 Points
retlif wrote:
Hi

We just received our engineering sample today.
As suggested by the developers, we upgraded the APP to 2.33 and the other SYS f/w updates.

However, now the CALIBRATE button does not work.

Please advice.

you may need to pressed this button about 2s...


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 291 posts ]  Go to page 1, 2, 3, 4, 5 ... 30  Next


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group  
Design By Poker Bandits