HOW TO COMPILE 100PCS HARDWARE IN 24HOURS? - Seeeduino Cloud

Moderator: dennis.yang

HOW TO COMPILE 100PCS HARDWARE IN 24HOURS? - Seeeduino Cloud

by Kevin.Hai » Tue Jun 23, 2015 3:49 pm

We did the experiments last month for our own project. Before the production, we hold the pre-meeting at 17:00, we fix the main timeline in the whole schedule. This time, we try to challenge a relatively complex product called Seeeduino Cloud, and we will record all the processes including PCB fabrication.

17:00 Pre-meeting
1.jpg
1.jpg (62.79 KiB) Viewed 15782 times


17:30 Release PO to PMC
2.jpg
2.jpg (34.72 KiB) Viewed 15782 times


17: 40 Run MRP
3.jpg
3.jpg (69.67 KiB) Viewed 15782 times


18:00 Preparing components in warehouse
4.jpg
4.jpg (110.86 KiB) Viewed 15782 times

5.jpg
5.jpg (104.83 KiB) Viewed 15782 times


18:30 Our PCB factory Start to produce PCB- Cut Lamination
6.jpg
6.jpg (77.06 KiB) Viewed 15782 times


Drilling
7.jpg
7.jpg (110.01 KiB) Viewed 15782 times

8.jpg
8.jpg (63.49 KiB) Viewed 15782 times


Plated through hole
9.jpg
9.jpg (138.28 KiB) Viewed 15782 times


Exposure
10.jpg
10.jpg (83.53 KiB) Viewed 15782 times

11.jpg
11.jpg (71.34 KiB) Viewed 15782 times

12.jpg
12.jpg (65.63 KiB) Viewed 15782 times

13.jpg
13.jpg (65.66 KiB) Viewed 15782 times


Developing
14.jpg
14.jpg (87.31 KiB) Viewed 15782 times


IMMERSION GOLD
15.jpg
15.jpg (86.99 KiB) Viewed 15782 times


Silk screen
16.jpg
16.jpg (83.89 KiB) Viewed 15782 times


Flying Probe test
17.jpg
17.jpg (124.71 KiB) Viewed 15782 times


Routing
18.jpg
18.jpg (97.59 KiB) Viewed 15782 times


PCB-Packaging
19.jpg
19.jpg (58.11 KiB) Viewed 15782 times


Ready to ship
20.jpg
20.jpg (87.46 KiB) Viewed 15782 times

21.jpg
21.jpg (98.4 KiB) Viewed 15782 times


The next morning~
8:30 PCB arrived to our MFG center& Our QC do incoming inspection
22.jpg
22.jpg (121.92 KiB) Viewed 15782 times

23.jpg
23.jpg (81.13 KiB) Viewed 15782 times


8:35 Put electronic components on feeders
24.jpg
24.jpg (117.2 KiB) Viewed 15782 times

25.jpg
25.jpg (109.54 KiB) Viewed 15782 times


9:00 Debug the Automatic Printer + Pick and place machine
26.jpg
26.jpg (114.35 KiB) Viewed 15782 times

27.jpg
27.jpg (131.38 KiB) Viewed 15782 times

28.jpg
28.jpg (139.8 KiB) Viewed 15782 times


9:10 QC check the components on Pick and place machine.
29.jpg
29.jpg (103.73 KiB) Viewed 15782 times

30.jpg
30.jpg (112.42 KiB) Viewed 15782 times


9:40 Make the first article
31.jpg
31.jpg (113.17 KiB) Viewed 15782 times

32.jpg
32.jpg (88.35 KiB) Viewed 15782 times


10:10 Components inspection
33.jpg
33.jpg (99.01 KiB) Viewed 15782 times


10:20 First article pass reflow
34.jpg
34.jpg (111.03 KiB) Viewed 15782 times

35.jpg
35.jpg (119.31 KiB) Viewed 15782 times

36.jpg
36.jpg (125.66 KiB) Viewed 15782 times


10:30 First article visual inspection
37.jpg
37.jpg (114.52 KiB) Viewed 15782 times

38.jpg
38.jpg (111.63 KiB) Viewed 15782 times


10:40 First article function test
39.jpg
39.jpg (113.88 KiB) Viewed 15782 times

40.jpg
40.jpg (116.07 KiB) Viewed 15782 times


11:00 Start SMT Production
41.jpg
41.jpg (175.47 KiB) Viewed 15782 times

42.jpg
42.jpg (98.07 KiB) Viewed 15782 times

43.jpg
43.jpg (105.22 KiB) Viewed 15782 times

44.jpg
44.jpg (116.71 KiB) Viewed 15782 times


12:00 Start Cell line Production
45.jpg
45.jpg (179.22 KiB) Viewed 15782 times

46.jpg
46.jpg (143.71 KiB) Viewed 15782 times

47.jpg
47.jpg (91.82 KiB) Viewed 15782 times


14:00 Testing
48.jpg
48.jpg (147.25 KiB) Viewed 15782 times


15:00 Failure analysis
49.jpg
49.jpg (153.77 KiB) Viewed 15782 times


15:30 FQC inspection
50.jpg
50.jpg (129.19 KiB) Viewed 15782 times

51.jpg
51.jpg (148.44 KiB) Viewed 15782 times


16:15 Packaging
52.jpg
52.jpg (171.12 KiB) Viewed 15782 times

53.jpg
53.jpg (140.6 KiB) Viewed 15782 times

54.jpg
54.jpg (126.41 KiB) Viewed 15782 times


16:30 Put in storage
55.jpg
55.jpg (125.45 KiB) Viewed 15782 times

56.jpg
56.jpg (76.68 KiB) Viewed 15782 times

57.jpg
57.jpg (99.91 KiB) Viewed 15782 times

58.jpg
58.jpg (132.91 KiB) Viewed 15782 times


In final, we completed the order in 24 hours, thanks all the guys in the team, thanks our project manager Eiki, she not only should ensure all the schedule on the right time, but also need to take all the photoes for sharing. If you want to get more information about 24 hours order service or want to try the service, you can apply it on our propagate page, http://www.seeedstudio.com/propagate/app/start, we will do the experiment and share every week.
Pre-kindergarten
Pre-kindergarten
 
Posts: 16
Joined: Thu Nov 11, 2010 4:13 pm

Who is online
Users browsing this forum: No registered users and 1 guest