Comments

  1. Alexandr commented  on  SARK-110 Antenna Analyzer please back to stock
     @ 2013-05-20 10:46:11

    Hi luogang,
    No problem, thanks!
    I believe that this is a very interest antenna analyzer not only for me and other HAM guys is very interesting too.

  2. Mohd commented  on  NDIR CO Sensor
     @ 2013-05-19 07:04:32

    Maybe you could source from other manufacturer. If it is being approved by your organization, i will be confident buying it, since you will be providing technical support, wiki and so on

  3. luogang
    luogang Seeed Employee commented  on  Protoboard 5cmx5cm for grove system
     @ 2013-05-19 06:47:02

    i f you need a bigger protoboard , maybe the proto shield is more suitable.

  4. luogang
    luogang Seeed Employee commented  on  Grove — Quantitative CO2 Sensor on Twig
     @ 2013-05-19 06:30:29

    thanks for your kindly suggestion , actually , seeed never refuse to cooperate with other manufacturers so long as the products really helpful for makers.

  5. luogang
    luogang Seeed Employee commented  on  SARK-110 Antenna Analyzer please back to stock
     @ 2013-05-19 06:25:20

    i am very sorry for the badly misunderstanding. will ask our market department for this matter.

  6. luogang
    luogang Seeed Employee commented  on  All Metal Grove Connectors (or plastic with a h...
     @ 2013-05-19 06:20:43

    need to consider about the price… will discuss this idea in our weekly conference
    . thanks .

    • Andrew commented  on  All Metal Grove Connectors (or plastic with a h...
       @ 2013-05-20 09:27:10

      Great! Also,I do think that the right angle connectors (shown in picture) would be easier to use with solder paste, since they balance better on the board than the upright ones.

  7. luogang
    luogang Seeed Employee commented  on  Starter Bundle Harness + Skeleton Box
     @ 2013-05-19 06:11:02

    thanks for you kindly suggestion. actully , we planned to design an enclosure for the GROVES, but as the Grove modules are different in dimension factor or connector or some other , it is difficult to design an enclosure for all the Grove modules. as the starter bundle harness and skeleton box ,you can buy them in the bazaar now

  8. luogang
    luogang Seeed Employee commented  on  NDIR CO Sensor
     @ 2013-05-19 06:05:27

    the gas sensor – MQ9 can detects the Monoxide, while the dioxide sensor is still in sourcing …:)

  9. Seth commented  on  Soil temperature and moisture sensor
     @ 2013-05-19 02:19:05

    When will this be in the store?

  10. Mohd commented  on  Grove — Quantitative CO2 Sensor on Twig
     @ 2013-05-18 05:55:01

    If it is too expensive to manufacture, why don’t seeeduino stock from other manufacturers. This is important because if seeeduino sell those products, I feel confident about the product, because I assume that seeeduino will test it to see weather it is adruino compactible, have technical support and so on.

  11. Mohd commented  on  GROVE BH1750FVI Digital Light Sensor
     @ 2013-05-17 10:15:51

    The light sensor should be covered with transparent and durable materials since i intend to use it on the field ( exposed to rain and so on )

  12. Michele commented  on  HIGH voltage input groove
     @ 2013-05-17 11:42:50

    Very good but my idea it’s for connect arduino to industrial machine with digital input not analogic input.

  13. Haoji commented  on  BeagleBone Black
     @ 2013-05-16 03:03:10

    Definitely interesting.

  14. Rafael commented  on  SMD storage boxes
     @ 2013-05-16 02:57:45

    Please make available the bigger sizes: http://www.seeedstudio.com/wish/bigger-smd-storage-boxes-p2064

  15. Alexandr commented  on  SARK-110 Antenna Analyzer please back to stock
     @ 2013-05-16 12:21:32

    yep, but DSO Quad and SARK-110 have different hardware. DSO can’t act as antenna analyzer :(