Intel® Edison Breakout Kit

SKU 102100001
This item is no longer available.


This Kit includes a tiny Edison fits nicely onto a breakout board - sort of like a tiny IoT sparrow into a very small nest, so you can expose the native 1.8 V I/O of the Edison.

And it is for non-Arduino users. This breakout board has a minimalistic set of features and is slightly larger than the Edison module.

Dimensions: 61mm x 29mm x 12mm


• Uses a 22nm Intel® SoC that includes a dual core, dual threaded Intel® Atom™ CPU at 500MHz and a 32-bit Intel® Quark™ microcontroller at 100 MHz.  It supports 40 GPIOs and includes 1GB LPDDR3, 4 GB EMMC, and dual-band WiFi and BTLE on a module slightly larger than a postage stamp.

• The Intel Edison module will initially support development with Arduino* and C/C++, followed by Node.JS, Python, RTOS, and Visual Programming support in the near future.

• It includes a device-to-device and device-to-cloud connectivity framework to enable cross-device communication and a cloud-based, multi-tenant, time-series analytics service.

• The breakout board has exposes native 1.8V I/O of edison module. And 0.1'' grid I/O array of through-hole solder points. USB OTG with USB Micro Type-AB connector, USB OTG power switch. Battery Charge, USB to device UART bridge with USB Micro Type-B connector,  DC power supply jack (7V – 15V DC input).


Form factor            Board with 70-pin connector            
Dimensions            61mm x 29mm x 12mm            
Operating temperature            0 to 40 degC            
Connector            Hirose DF40 Series
(1.5mm, 2.0mm, or  3.0mm stack height)


Max Memory size            4GB            
Memory type            DDR3, Nand Flash            
Physical add. Ext.            32-bit            
# of  DIMMs            0            
ECC Memory supported:             NO            
External Interfaces                                                                                                                                          
Total of 40 GPIOs which can be configured as:            
SD Card            1 Interface            
UART            2 Controllers            
I2C            2 Controllers            
SPI            1 Controller with 2 chip selects            
I2S            1 Controller            
GPIO            Additional 12 (with 4 capable of PWM)            
USB 2.0            1 OTG Controller            
Clock Output            32 KHz, 19.2 MHz            
Major Edison Components                                                                                                                              
SoC            22nm Intel SoC includes: a dual core, dual threaded Intel Atom CPU at 500MHz, and a 32-bit Intel Quark microcontroller at 100 MHz            
RAM            1 GB LPDDR3 POP memory            
Flash Storage            4 GB eMMC            
WiFi            Broadcom 43340 802.11 a/b/g/n            
Dual-band (2.4 and 5 GHz)            
On board antenna or external antenna SKU configurations            
Bluetooth            BT 4.0            
Input            3.3V – 4.5V            
Output            100ma @3.3V and 100ma @ 1.8V            
Power            Standby (No radios): 13mW            
Standby (BT 4.0): 21.5mW            
Standby (WiFi): 35 mW            
Firmware + Software                                                                                                                                       
CPU OS            Yocto Linux v1.6            
Development Environments            Arduino IDE            
Eclipse supporting: C, C++ & Python            
Intel XDK supporting: Node.JS & HTML5            
MCU OS            RTOS            
Development Environments            MCU SDK and IDE            


Related Products

Technical Details

Dimensions105mm x 90mm x 40mm
WeightG.W 94g    

Part List

Intel® Edison Breakout Kit1


ECCNNot Available




Questions and Answers


    View History

    Intel® Edison Breakout Kit

    SKU 102100001
    This item is no longer available.
    $72.50/ 1pcs+
    • Description
    • Technical Details
    • Reviews
    • Questions and Answers
    Notify me when it's back in stock