Lichee Nano is an SD Card Sized Linux Development Board Powered by Allwinner F1C100s ARM9 Processor

Features/Specifications

• CPU

-Allwinner F1C100s, ARM 926EJS processor,up to 900MHz

• Memory & storage

-32MB DDR integrated into SoC, 16MB SPI Flash
-Onboard TF Slot, can be boot from TF Card,

• Display

-40-pin RGB LCD FPC connector supporting 272×480, 480×800, 1024×600

and other resolutions resistive displays(and capacitive displays trough the adapter board).
-Support 720P video output, support video stream decoding such as H.264 / MPEG

• Communication Interface

-SDIO for WiFi module
-SPI x2, TWI x3, UART x3

-OTG USB x1, TV out

• Other interface

-PWM x2, LRADC x1

-Headphone output x2, Mic x1

• Electrical characteristics

-Input 5V via micro USB port, 3.3 to 5V via pin
-Output – 3.3V, selectable input RTC voltage
-Power Consumption – 54mA (idle) with Linux, 250mA with display
-Storage Temperature: -40~125°C; operating: -20 to 70°C

Software and development environment

• Support 3.10 BSP linux,
• Support 4.19 mainline linux,
• Support xboot bare metal development environment
• Support RT-Thread

Target application scenario:

• IoT applications using more complex communication interfaces and protocols
• The application of human-computer interaction interface that needs more beautiful and complex logic
• Application scenarios that require more operations (as opposed to common MCUs)
• Need to use open source software under Linux for rapid development scenarios
• High-end geek players balance in size, performance and ease of use.
• Entry level player, software engineer, hardware diy using familiar language