
Wio-E5 mini (STM32WLE5JC) Dev Board, for Long Range Application
Wio-E5 mini is a compacted-sized dev board suitable for the rapid testing and building of small-size LoRa device and application prototyping. Wio-E5 mini is embedded with and leads out full GPIOs of Wio-E5 STM32WLE5JC. It has rich interfaces including UART, ADC, SPI, IIC,etc. Supporting Long Range protocol and global frequency, Wio-E5 mini is able to achieve a transmission range of up to 10 km in open area and ultra-low power consumption.
- 10+: $19.90
- 100+: $17.50
YOU MAY LIKE THIS
PRODUCT DETAILS
Note
For any inquiries regarding large volume requests or other assistance, please feel free to contact us directly at [email protected]
Note
Please note that the newly released Wio-E5 CAN Development kit is based on the Wio-E5 module with a built-in CAN controller MCP2515 and supports CAN FD, CAN2.0, and RS485 communication. It is a good tool for both Long Range sensor network management and Car Hacking.
Note
Please click here to contact us if you need any further information on Seeed IIoT products and services. We are excited to see you can scale up and expand your business with our products and services.
Note
Seeed fusion offers PCB/ PCBA manufacturing service for customized products based on Wio-E5 STM32WLE5JC Module with an online instant quote and fast delivery. Get $250 off when your Wio-E5 design is manufactured with Seeed Fusion! Click here to apply now!
Note
We recently upgraded the packaging of the Wio-E5 mini. The replacement of the old and new packages is being carried out step by step, therefore there may be a random and mixed delivery of the old and new packages, please kindly note and thank you for understanding.
Features
- Full GPIOs led out from the Wio-E5 STM32WLE5JC
- Global Long Range frequency plan supported
- Long-distance transmission range to 10km (ideal value in open area)
- Mini and compact size, suitable for rapid testing and building small size prototype
- Convenient RESET and BOOT buttons on board
Wio-E5 mini is a compacted-sized development board suitable for the rapid testing and building of small-size prototyping and helps you design your ideal Long Range wireless IoT device with a long-distance transmission range.
There is a built-in USB to UART function on board, you could connect the Wio-E5 mini to your PC with a USB type C cable, and use serial communication software to send AT commands and read data from the board.
For example, connect Wio-E5 mini to Seeeduino XIAO and the Expansion Board via UART, and send AT commands and read data from Seeeduino XIAO through Arduino IDE serial monitor.
Develop your own Long Range development board with MCU function by using STM32Cube Programmer, which is the SDK officially provided by STMicroelectronics. To download this SDK resource, please find the resources in learning and document down below.
With all the outstanding features listed above, the Wio-E5 mini will be a superior choice for IoT device development, testing, prototyping, and applications in long-distance, ultra-low power consumption IoT scenarios like smart agriculture, smart office, and smart industry.
If you are unfamiliar with Long Range technology, please check out this blog LoRapedia in detail.
Hardware Overview
Package Information
Applications
- Wio-E5 module Easy testing
- Rapid small-dimension prototyping of Long Range devices with Wio-E5
- Any long-distance wireless communication application development
- Long Range application learn and research
Application Note
For more detailed information about how to use Wio-E5, please visit Wio-E5 (STM32WLE5JC) Module Wiki.
1. Factory AT Firmware
Wio-E5 series has a built-in AT command firmware, which supports Long Ragne Class A/B/C protocol and a wide frequency plan: EU868/US915/AU915/AS923/KR920/IN865. With this AT command firmware, users can easily and quickly build their prototype or application.
The AT command firmware contains a bootloader for DFU and the AT application. The "PB13/SPI_SCK/BOOT" pin is used to control Wio-E5 to stay in the bootloader or jump to the AT application. When PB13 is HIGH, the module will jump to AT application after reset, with a default baud rate of 9600. When PB13 is LOW (press the "Boot" button on Wio-E5 Dev Board or Wio-E5 mini), the module will stay in the bootloader, and keep transmitting "C" character every 1S at baud rate 115200.
Attention
1. Factory AT Firmware is programmed with RDP(Read Protection) Level 1, developers need to remove RDP first with STM32Cube Programmer. Note that regression RDP to level 0 will cause a flash memory mass to erase and the Factory AT Firmware can't be restored again.
2. The "PB13/SPI_SCK/BOOT" pin on the Wio-E5 module is just a normal GPIO, not the "BOOT0" pin of the MCU. This "PB13/SPI_SCK/BOOT" pin is used in the bootloader of the Factory AT firmware, to decide to jump to APP or stay in bootloader(for DFU). The real "BOOT0" pin doesn't pinout to the module, so developers need to be careful when developing low-power applications.
2. Clock Configuration
2.1 HSE
-
32MHz TCXO
-
TCXO power supply: PB0-VDD_TCXO
2.2 LSE
-
32.768KHz crystal oscillator
3. RF Switch
Wio-E5 module ONLY transmits through RFO_HP:
-
Receive: PA4=1, PA5=0
-
Transmit(high output power, SMPS mode): PA4=0, PA5=1
Specifications
Parameters | Specifications |
---|---|
size | 50*23mm |
voltage - supply | 3.7V - 5V |
power - output | up to +20.8 dBm at 3.3V |
working frequency | 868/915MHz |
protocol | Long Range |
sensitivity | -116.5 dBm ~ -136 dBm |
interfaces | USB Type C / 2P-2.54mm Hole / 1*12P-2.54mm Header*2 / SMA-K / IPEX |
modulation | Long Range , (G)FSK, (G)MSK, BPSK |
working temperature | -40℃ ~ 85℃ |
current | Wio-E5 module sleep current as low as 2.1uA (WOR mode) |
Part List: | |
---|---|
Wio-E5 mini *1 | |
Antenna(EU868/US915) *1 | |
USB TypeC (20cm) *1 | |
Sticker *1 | |
1X12pin male pin headers *2 |
Dimension
Note
Some of our product names will be changed/updated accordingly. The products with updated names are demonstrated in the following table, which serves as a guide for you to avoid any possible confusion. Please check this blog for further info.ECCN/HTS
HSCODE | 8517709000 |
USHSCODE | 8543709301 |
UPC | |
EUHSCODE | 8517180000 |
COO | CHINA |
RoHS | 1 |
LEARN AND DOCUMENTS
Documentations
Wio-E5 mini Datasheet:
Wio-E5 Datasheet:
WioLoRa-E5 datasheet and specifications
Wio-E5 AT Command Specification
Wio-E5 Certifications:
Wio-E5-HF Certification CE-VOC-RED
Wio-E5-HF FCC Certification -DSS
Wio-E5-HF FCC Certification -DTS
Relevant SDK:
SHARED BY USERS
REVIEWS
-
from order viewAmazing start to hobby-type projects!
-
from order viewAmazing Eval board with outstanding quality of PCB , USB-C and nice packaging.
Love it -
from order viewThis user did not leave any comments.
-
from order viewThis user did not leave any comments.
-
from order viewThis user did not leave any comments.