seeedstudio
      Items
      Total
      Go to Checkout
      Your cart is empty
      Xadow Wearable Kit For Intel® Edison
      • Xadow Wearable Kit For Intel® Edison
      • Xadow Wearable Kit For Intel® Edison
      • Xadow Wearable Kit For Intel® Edison
      • Xadow Wearable Kit For Intel® Edison

      Xadow Wearable Kit For Intel® Edison

      SKU 110060065
      • The First Wearable Kit for Intel® Edison
      • What is it
      • Xadow Wearable Kit for Intel Edison is a perfect kit to make wearable devices with Intel Edison
        This product contains battery, might applys to shipping constriction.
        $129.00
        DISCONTINUED
        This item is no longer available.
        Description

        The First Wearable Kit for Intel® Edison

        The First Wearable Kit for Intel® Edison

        What is it

        What is it

        Xadow Wearable Kit for Intel Edison is a perfect kit to make wearable devices with Intel Edison. It includes an expansion board together with eight tiny and powerful Xadow modules, covering sensors, actuators, displays and communication parts. The connectivity through FFC makes it quite flexible for wearable projects. Based on the kit, you could build your own pedometer, thermometer and NFC enabled devices!

        What's inside?

        Xadow - Expansion Board x 1

        Xadow – 3 Axis Accelerometer x 1

        Xadow - Programmer x 1

        Xadow – Barometer BMP 180 x 1

        Xadow - SD Card x 1

        Battery x 1

        Xadow - Q Touch Sensor x 1

        Digital RGB LED Flexi-Strips x 5

        Xadow – NFC x 1

        Power Cables (Red) x 5

        Xadow – Breakout x 1

        Power Cables (White) x 5

        Xadow – Buzzer x 1

        Power Cables (Yellow) x 5

        Xadow – Vibration Motor x 1

        FFC Package x 1

        Xadow – OLED x 1

        Full-Color Printed Tutorial x 1

        Project 1: Cool Light

        What We’ve Get Here

        In this project, we use an NFC module and a Q Touch one to control the RGB LED strip. There are 3 buttons of the Q Touch module. To make NFC module work, NFC tag must be wrote record message in. About how to write tags, please refer to Tips.

        The Circuit

        What We’ve Get Here

        Result

        Put one of the NFC tags onto the antenna and you’ll see LED shine. There’re three modes – single color loop, flow color and rainbow cycles, reflecting to the three different tags, respectively. Besides, if touch one of the buttons on Q Touch Sensor, the LED strip will show a single color say red, green or blue.

        Project 2: Glowing Thermometer

        What We’ve Get Here

        We utilize a barometer module here to monitor the temperature, air pressure and altitude. The index will be shown on the OLED. To start with, let’s set up a secure temperature between 20℃ and 30℃. When the temperature goes out of the secure range, the vibrator will shake and the OLED will display a warning picture. Now open the demo Glowing Thermometer compile and upload the sketch.

        The Circuit

        What We’ve Get Here

        Result

        1. Default OLED Display

        Default OLED Display

        2.Here’s the high temperature warning display

        Here’s the high temperature warning display

        Project 3: Pedometer

        What We’ve Get Here

        This project shows how to DIY a pedometer that counts a person’s walking steps. Here we have the expansion board, the Xadow - OLED, the Xadow – 3-Axis Accelerometer and Xadow – Buzzer. The OLED screen will display the counts and the buzzer will beep if you do not move for a long time. Additionally, when connect the Intel Edison board to a Wi-Fi network, you can check the record online.

        Result

        1. Shake Xadow-3-Axis Accelerometer, you will see the pedometer counts.

        Result

        2. When the pedometer connects WiFi network, the local IP will display on the OLED screen:

        Result

        3. On a device connected on the same network, open a web browser, and go to the IP address displayed on the OLED or Serial Monitor, you can see the step counts.

        Result

        The 3D model of watch case is available at our wiki: http://www.seeedstudio.com/wiki/Xadow_Wearable_Kit_For_Edison You may print it out with a 3D printer. And here’s what it looks like.

        3D model

        Documents

        Please visit our Wiki page for more info about this product. It will be much appreciated if you can help improve the documents, add more demo code or tutorials.

        For technical support, please post your questions to our Forum.

        See More
        $50 Featured List
        $100 Featured List
        $200 Featured List
        Don’t miss out!
        Reviews
        See More
        Questions and Answers
        SUBMIT
        See More
        View History
        Recommendations
        Notify me when it's back in stock
        SUBMIT

        Free shipping on your first order over $50 or more. Discounted items included!

        Invalid email address.
        * Discount applys on orders over $50, exclueding shipping fee. Fusion service is excluded from this offer