{"id":431,"date":"2009-07-03T22:10:24","date_gmt":"2009-07-04T04:10:24","guid":{"rendered":"http:\/\/www.seeedstudio.com\/blog\/?p=431"},"modified":"2014-08-28T17:02:45","modified_gmt":"2014-08-28T09:02:45","slug":"burn-the-bootloader-for-rainbowduino-wiht-uartsb","status":"publish","type":"post","link":"https:\/\/www.seeedstudio.com\/blog\/2009\/07\/03\/burn-the-bootloader-for-rainbowduino-wiht-uartsb\/","title":{"rendered":"Burn the Bootloader for Rainbowduino with UartSB"},"content":{"rendered":"

The Rainbowduino have not the USB connector and cannot use the Arduino IDE to program it directly. You can program it use the UartSB or the seeeduino, also you can program it use the ISP interface. If use the latter way, the boot loader of the Rainbowduino may be recover, and then you want to program it with the former way next time you must to burn the boot loader again.<\/span><\/span><\/p>\n

\u00a0<\/p>\n

You can burn the boot loader for Rainbowduino also use the UartSB .The UartSB have a ISP interface, just to seal the pins on it. And hook it up to the contact pin on the Rainbowduino.<\/span><\/span><\/p>\n

\"\"<\/a><\/span><\/p>\n

After that you can use the AVRDUDE to burn the boot loader for Rainbow with UartSB. Put the AVRDUDE.exe file in some folder, as an example I put it in the way: \u201c E:\\UartSB_2.1_ISP.Run \u201cthe CMD command to open the DOS command windows.<\/span><\/span><\/p>\n

Input the command to enter the folder which you put the AVRDUDE.exe.As I put it in the E:\\UartSB_2.1_ISP.Then I input the command:<\/span><\/span><\/p>\n

E:<\/span><\/span><\/p>\n

cd UartSB_2.1_ISP<\/span><\/span><\/p>\n

\"\"<\/a><\/span><\/p>\n

Now run the AVRDUDE.exe with some setting. Input the command:<\/span><\/span><\/p>\n

avrdude -c diecimila -P ft0 -p m168 -t -B 4800<\/span><\/span><\/p>\n

“-P ft0” is Bitbang-Port settings. \u201c-p m168\u201d is chip settings. “-B 4800” is slow clock mode settings.<\/span><\/span><\/p>\n

\"\"<\/a><\/span><\/p>\n

Erase the chip:<\/span><\/span><\/p>\n

erase<\/span><\/span><\/p>\n

Write the fuse:<\/span><\/span><\/p>\n

w efuse 0 0x00<\/span><\/span><\/p>\n

w hfuse 0 0xDD<\/span><\/span><\/p>\n

w lfuse 0 0xFF<\/span><\/span><\/p>\n

\"\"<\/a><\/span><\/p>\n

When have written the fuse , quit the AVRDUDE.<\/span><\/span><\/p>\n

quit<\/span><\/span><\/p>\n

\u00a0<\/p>\n

And now burn the boot loader in to FLASH, and to easily we had better put the boot loader HEX file in the same folder as AVRDUDE:<\/span><\/span><\/p>\n

avrdude -c diecimila -P ft0 -p m168 -U flash:w:atmega168.hex<\/span><\/span><\/p>\n

Waiting the program .it will cost few seconds to do this process. When it done it will do the verify and show the result.<\/span><\/span><\/p>\n

Now the boot loader has been burned into the Raibowduino\u2019s Flash and we have to check the fuse and lock it.<\/span><\/span><\/p>\n

Setting to a faster clock:<\/span><\/span><\/p>\n

avrdude -c diecimila -P ft0 -p m168 \u2013t<\/span><\/span><\/p>\n

\"\"<\/a><\/span><\/p>\n

write a lock bit:<\/span><\/span><\/p>\n

read the fuse and check if right:<\/span><\/span><\/p>\n

d efuse<\/span><\/span><\/p>\n

d hfuse<\/span><\/span><\/p>\n

d lfuse<\/span><\/span><\/p>\n

\"\"<\/a><\/span><\/p>\n

Lock read and quit <\/span><\/span><\/p>\n

d lock<\/span><\/span><\/p>\n

quit<\/span><\/span><\/p>\n

\"\"<\/a><\/span><\/p>\n

And if u consider using the command to burn it is to Complexity, you can use software called argued-GUI to burn it. More information about it is here: <\/span><\/span><\/p>\n

http:\/\/www.geocities.jp\/arduino_diecimila\/bootloader\/index_en.html<\/a> <\/span><\/span><\/p>\n","protected":false},"excerpt":{"rendered":"

The Rainbowduino have not the USB connector and cannot use the Arduino IDE to program<\/p>\n","protected":false},"author":1,"featured_media":0,"comment_status":"open","ping_status":"closed","sticky":false,"template":"","format":"standard","meta":{"_lmt_disableupdate":"","_lmt_disable":"","_price":"","_stock":"","_tribe_ticket_header":"","_tribe_default_ticket_provider":"","_tribe_ticket_capacity":"0","_ticket_start_date":"","_ticket_end_date":"","_tribe_ticket_show_description":"","_tribe_ticket_show_not_going":false,"_tribe_ticket_use_global_stock":"","_tribe_ticket_global_stock_level":"","_global_stock_mode":"","_global_stock_cap":"","_tribe_rsvp_for_event":"","_tribe_ticket_going_count":"","_tribe_ticket_not_going_count":"","_tribe_tickets_list":"[]","_tribe_ticket_has_attendee_info_fields":false,"iawp_total_views":0,"footnotes":""},"categories":[1],"tags":[213,49],"class_list":["post-431","post","type-post","status-publish","format-standard","hentry","category-news","tag-rainbow-cube","tag-rainbowduino"],"yoast_head":"\nBurn the Bootloader for Rainbowduino with UartSB - Latest News from Seeed Studio<\/title>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/www.seeedstudio.com\/blog\/2009\/07\/03\/burn-the-bootloader-for-rainbowduino-wiht-uartsb\/\" \/>\n<meta property=\"og:locale\" content=\"en_US\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"Burn the Bootloader for Rainbowduino with UartSB - Latest News from Seeed Studio\" \/>\n<meta property=\"og:description\" content=\"The Rainbowduino have not the USB connector and cannot use the Arduino IDE to program\" \/>\n<meta property=\"og:url\" content=\"https:\/\/www.seeedstudio.com\/blog\/2009\/07\/03\/burn-the-bootloader-for-rainbowduino-wiht-uartsb\/\" \/>\n<meta property=\"og:site_name\" content=\"Latest News from Seeed Studio\" \/>\n<meta property=\"article:published_time\" content=\"2009-07-04T04:10:24+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2014-08-28T09:02:45+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/www.seeedstudio.com\/wp-content\/uploads\/2009\/07\/uare1.jpg\" \/>\n<meta name=\"author\" content=\"\u884c\u653f\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:label1\" content=\"Written by\" \/>\n\t<meta name=\"twitter:data1\" content=\"\u884c\u653f\" \/>\n\t<meta name=\"twitter:label2\" content=\"Est. reading time\" \/>\n\t<meta name=\"twitter:data2\" content=\"2 minutes\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\/\/schema.org\",\"@graph\":[{\"@type\":\"WebPage\",\"@id\":\"https:\/\/www.seeedstudio.com\/blog\/2009\/07\/03\/burn-the-bootloader-for-rainbowduino-wiht-uartsb\/\",\"url\":\"https:\/\/www.seeedstudio.com\/blog\/2009\/07\/03\/burn-the-bootloader-for-rainbowduino-wiht-uartsb\/\",\"name\":\"Burn the Bootloader for Rainbowduino with UartSB - Latest News from Seeed Studio\",\"isPartOf\":{\"@id\":\"https:\/\/www.seeedstudio.com\/blog\/#website\"},\"datePublished\":\"2009-07-04T04:10:24+00:00\",\"dateModified\":\"2014-08-28T09:02:45+00:00\",\"author\":{\"@id\":\"https:\/\/www.seeedstudio.com\/blog\/#\/schema\/person\/4a6f0df70e5aa1b470083e77a0919ba5\"},\"breadcrumb\":{\"@id\":\"https:\/\/www.seeedstudio.com\/blog\/2009\/07\/03\/burn-the-bootloader-for-rainbowduino-wiht-uartsb\/#breadcrumb\"},\"inLanguage\":\"en-US\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\/\/www.seeedstudio.com\/blog\/2009\/07\/03\/burn-the-bootloader-for-rainbowduino-wiht-uartsb\/\"]}]},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\/\/www.seeedstudio.com\/blog\/2009\/07\/03\/burn-the-bootloader-for-rainbowduino-wiht-uartsb\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\/\/www.seeedstudio.com\/blog\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Burn the Bootloader for Rainbowduino with UartSB\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\/\/www.seeedstudio.com\/blog\/#website\",\"url\":\"https:\/\/www.seeedstudio.com\/blog\/\",\"name\":\"Latest News from Seeed Studio\",\"description\":\"Emerging IoT, AI and Autonomous Applications on the Edge\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\/\/www.seeedstudio.com\/blog\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"en-US\"},{\"@type\":\"Person\",\"@id\":\"https:\/\/www.seeedstudio.com\/blog\/#\/schema\/person\/4a6f0df70e5aa1b470083e77a0919ba5\",\"name\":\"\u884c\u653f\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"en-US\",\"@id\":\"https:\/\/www.seeedstudio.com\/blog\/#\/schema\/person\/image\/\",\"url\":\"https:\/\/secure.gravatar.com\/avatar\/4c87945076c1c9aea5570fea7739e112?s=96&r=g\",\"contentUrl\":\"https:\/\/secure.gravatar.com\/avatar\/4c87945076c1c9aea5570fea7739e112?s=96&r=g\",\"caption\":\"\u884c\u653f\"},\"url\":\"https:\/\/www.seeedstudio.com\/blog\/author\/admin\/\"}]}<\/script>\n<!-- \/ Yoast SEO plugin. -->","yoast_head_json":{"title":"Burn the Bootloader for Rainbowduino with UartSB - Latest News from Seeed Studio","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/www.seeedstudio.com\/blog\/2009\/07\/03\/burn-the-bootloader-for-rainbowduino-wiht-uartsb\/","og_locale":"en_US","og_type":"article","og_title":"Burn the Bootloader for Rainbowduino with UartSB - Latest News from Seeed Studio","og_description":"The Rainbowduino have not the USB connector and cannot use the Arduino IDE to program","og_url":"https:\/\/www.seeedstudio.com\/blog\/2009\/07\/03\/burn-the-bootloader-for-rainbowduino-wiht-uartsb\/","og_site_name":"Latest News from Seeed Studio","article_published_time":"2009-07-04T04:10:24+00:00","article_modified_time":"2014-08-28T09:02:45+00:00","og_image":[{"url":"https:\/\/www.seeedstudio.com\/wp-content\/uploads\/2009\/07\/uare1.jpg","type":"","width":"","height":""}],"author":"\u884c\u653f","twitter_card":"summary_large_image","twitter_misc":{"Written by":"\u884c\u653f","Est. reading time":"2 minutes"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"WebPage","@id":"https:\/\/www.seeedstudio.com\/blog\/2009\/07\/03\/burn-the-bootloader-for-rainbowduino-wiht-uartsb\/","url":"https:\/\/www.seeedstudio.com\/blog\/2009\/07\/03\/burn-the-bootloader-for-rainbowduino-wiht-uartsb\/","name":"Burn the Bootloader for Rainbowduino with UartSB - Latest News from Seeed Studio","isPartOf":{"@id":"https:\/\/www.seeedstudio.com\/blog\/#website"},"datePublished":"2009-07-04T04:10:24+00:00","dateModified":"2014-08-28T09:02:45+00:00","author":{"@id":"https:\/\/www.seeedstudio.com\/blog\/#\/schema\/person\/4a6f0df70e5aa1b470083e77a0919ba5"},"breadcrumb":{"@id":"https:\/\/www.seeedstudio.com\/blog\/2009\/07\/03\/burn-the-bootloader-for-rainbowduino-wiht-uartsb\/#breadcrumb"},"inLanguage":"en-US","potentialAction":[{"@type":"ReadAction","target":["https:\/\/www.seeedstudio.com\/blog\/2009\/07\/03\/burn-the-bootloader-for-rainbowduino-wiht-uartsb\/"]}]},{"@type":"BreadcrumbList","@id":"https:\/\/www.seeedstudio.com\/blog\/2009\/07\/03\/burn-the-bootloader-for-rainbowduino-wiht-uartsb\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/www.seeedstudio.com\/blog\/"},{"@type":"ListItem","position":2,"name":"Burn the Bootloader for Rainbowduino with UartSB"}]},{"@type":"WebSite","@id":"https:\/\/www.seeedstudio.com\/blog\/#website","url":"https:\/\/www.seeedstudio.com\/blog\/","name":"Latest News from Seeed Studio","description":"Emerging IoT, AI and Autonomous Applications on the Edge","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/www.seeedstudio.com\/blog\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"en-US"},{"@type":"Person","@id":"https:\/\/www.seeedstudio.com\/blog\/#\/schema\/person\/4a6f0df70e5aa1b470083e77a0919ba5","name":"\u884c\u653f","image":{"@type":"ImageObject","inLanguage":"en-US","@id":"https:\/\/www.seeedstudio.com\/blog\/#\/schema\/person\/image\/","url":"https:\/\/secure.gravatar.com\/avatar\/4c87945076c1c9aea5570fea7739e112?s=96&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/4c87945076c1c9aea5570fea7739e112?s=96&r=g","caption":"\u884c\u653f"},"url":"https:\/\/www.seeedstudio.com\/blog\/author\/admin\/"}]}},"modified_by":null,"views":8136,"featured_image_urls":{"full":"","thumbnail":"","medium":"","medium_large":"","large":"","1536x1536":"","2048x2048":"","visody_icon":"","magazine-7-slider-full":"","magazine-7-slider-center":"","magazine-7-featured":"","magazine-7-medium":"","magazine-7-medium-square":""},"author_info":{"display_name":"\u884c\u653f","author_link":"https:\/\/www.seeedstudio.com\/blog\/author\/admin\/"},"category_info":"<a href=\"https:\/\/www.seeedstudio.com\/blog\/category\/news\/\" rel=\"category tag\">News<\/a>","tag_info":"News","comment_count":"1","_links":{"self":[{"href":"https:\/\/www.seeedstudio.com\/blog\/wp-json\/wp\/v2\/posts\/431","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.seeedstudio.com\/blog\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.seeedstudio.com\/blog\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.seeedstudio.com\/blog\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.seeedstudio.com\/blog\/wp-json\/wp\/v2\/comments?post=431"}],"version-history":[{"count":4,"href":"https:\/\/www.seeedstudio.com\/blog\/wp-json\/wp\/v2\/posts\/431\/revisions"}],"predecessor-version":[{"id":9315,"href":"https:\/\/www.seeedstudio.com\/blog\/wp-json\/wp\/v2\/posts\/431\/revisions\/9315"}],"wp:attachment":[{"href":"https:\/\/www.seeedstudio.com\/blog\/wp-json\/wp\/v2\/media?parent=431"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.seeedstudio.com\/blog\/wp-json\/wp\/v2\/categories?post=431"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.seeedstudio.com\/blog\/wp-json\/wp\/v2\/tags?post=431"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}