{"id":5435,"date":"2012-10-01T19:18:29","date_gmt":"2012-10-02T02:18:29","guid":{"rendered":"http:\/\/www.seeedstudio.com\/blog\/?p=5435"},"modified":"2014-07-16T15:28:35","modified_gmt":"2014-07-16T07:28:35","slug":"new-products-post","status":"publish","type":"post","link":"https:\/\/www.seeedstudio.com\/blog\/2012\/10\/01\/new-products-post\/","title":{"rendered":"New Products Post"},"content":{"rendered":"

\"\"<\/p>\n

It was so nice to chat with all of you at Maker Faire New York this weekend.\u00a0 We loved sharing our products and discussing all of the great ways you\u2019ve used them to create fun and innovative projects.\u00a0 So in the spirit of Maker Faire, we\u2019ve got a huge launch of new products this week.<\/p>\n

\"\"<\/p>\n

Flying Stone Technology has come out with a USB bus powered, 32-bit microprocessor with an LED and an extension I\/O pin geared towards Gnuk and NeuG.\u00a0 They focused on minimalist design to keep it uncluttered and reduce the footprint.\u00a0 The board is offered in three different versions.\u00a0 The FST-01 without Enclosure<\/a> is simply the bare board and best for development or for those who want to create their own enclosure.\u00a0 The FST-01 with White Enclosure<\/a> comes with a white case that you assemble and thus, still allows for easy access to the SWD port.\u00a0 Lastly, there is the FST-01 with Heat Shrink Tube<\/a>.\u00a0 It comes with a fixed, clear heat shrink covering, making the SWD port inaccessible.<\/p>\n

\"\"<\/p>\n

If you are looking for pure fun and whimsy, look no further than the Nose LED Kit<\/a>.\u00a0 This easy-to-assemble kit uses a temperature sensor to turn on or off an LED.\u00a0 Simply stick the finished product in your nostril, exhale to trigger the sensor, and let the fun begin.\u00a0 Your nostril will light up with every exhalation.\u00a0 If you want your nostril to always have a pleasant glow, then you should pick up the Nose LED Kit (Normally On Version)<\/a>.\u00a0 With the Normally On version your nostril always glows, but the light becomes more intense whenever you exhale.\u00a0 Pick up one or two kits today and use them to create a truly unique Halloween costume.<\/p>\n

\"\"<\/p>\n

Ever wanted to have a party in your shower?\u00a0 Well now you can with the 3.6V Micro Hydro Generator<\/a>.\u00a0 Use the hydro generator to harness your shower\u2019s water pressure and power an LED in your shower head.\u00a0 Does your pressure fluctuate a tad?\u00a0 Don\u2019t worry.\u00a0 The generator uses a voltage stabilizing circuit and a rechargeable battery to provide a constant output voltage and current.\u00a0 You can\u2019t go wrong going green, utilizing water as your renewable power source.<\/p>\n

\"\"<\/p>\n

Last week we touched on all of the new RF Explorer<\/a> attenuators that we just got in stock.\u00a0 Now we have a classy, laser-cut, blue acrylic RF Explorer Holder<\/a>.\u00a0 This is well-designed and preserves the functionality of the device while providing a hands free environment.\u00a0 There is plenty of clearance space to connect a USB cable from below or from the sides.\u00a0 It even includes holes on the bottom, so that it can be secured to a desk or table which comes in handy for displays at Maker Faire or other conventions.<\/p>\n

\"\"<\/p>\n

Need to cool a large surface?\u00a0 Check out our Peltier Plate \u2013 30mm*30mm<\/a>.\u00a0 It uses the thermoelectric effect to provide cooling to chips, LEDs, etc.\u00a0 Plus, it is free of noise, friction, and vibration.\u00a0 If you are looking for something more compact, we also offer the Peltier Plate in two smaller sizes.<\/p>\n