{"id":68174,"date":"2022-07-20T15:26:33","date_gmt":"2022-07-20T07:26:33","guid":{"rendered":"https:\/\/www.seeedstudio.com\/blog\/?p=68174"},"modified":"2023-07-19T16:29:49","modified_gmt":"2023-07-19T08:29:49","slug":"have-you-ever-seen-a-pig-live-stream-%f0%9f%98%b2-iot-application-on-helium-network-with-sensecap-s210x-series","status":"publish","type":"post","link":"https:\/\/www.seeedstudio.com\/blog\/2022\/07\/20\/have-you-ever-seen-a-pig-live-stream-%f0%9f%98%b2-iot-application-on-helium-network-with-sensecap-s210x-series\/","title":{"rendered":"Have You Ever Seen A Pig Live Stream | IoT Application on Helium Network with SenseCAP S210X Series"},"content":{"rendered":"\n

Live streaming has become very popular, but have you ever seen a pig live stream? <\/p>\n\n\n\n

Let’s see how it works! ?<\/p>\n\n\n\n

\n\n\n\n

<\/p>\n\n\n\n

<\/p>\n\n\n\n

Who are they?<\/strong><\/h2>\n\n\n\n

Based in the Netherlands, Stal Data is a technology solutions company for farmers. Its founder pays attention to monitoring animal behavior and living environment to provide a technical solution to farmers and improve the well-being of the pigs. This process is also shown to the public through live streaming.<\/p>\n\n\n\n

\"\"<\/figure><\/div>\n\n\n\n

<\/strong> \uff08Tips: The live link is at the end of the article.\uff09<\/sub><\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

How did they build this whole network?<\/strong><\/h2>\n\n\n\n
  1. Deploying a Helium gateway<\/a><\/li>
  2. Deploying SenseCAP sensors<\/li>
  3. Checking data on the web and SenseCAP Mate App<\/li><\/ol>\n\n\n\n
    \"\"<\/figure>\n\n\n\n

    (4. Displaying data on the stream for Long term remote monitoring and management)<\/p>\n\n\n\n

    \"\"<\/figure>\n\n\n\n

    <\/p>\n\n\n\n

    \"\"<\/figure>\n\n\n\n

    Why did they do this?<\/strong><\/h2>\n\n\n\n

    1. CO2 concentration, temperature, and humidity<\/h4>\n\n\n\n

    Intensive pig farming is an industry where a lot of parameters are important. In the early days, farmers mainly focused on the feed. Nowadays, farmers realize that climate is also a big part of the behavior of pigs and their health and growth.<\/p>\n\n\n\n

    \"\"<\/a><\/figure><\/div>\n\n\n\n

    Monitoring temperature and humidity are important in pig farming to understand what is going on with the climate inside of the barn. An example that Stal Data experienced on their farm was that in the rear of the rooms in the barn, the air was very hot and humid. At that time, they placed 12 temperature and humidity sensors inside the room. By measuring the temperature and humidity, they found that the temperature in the rear end of the room was always 5 degrees higher than in the front of the room, where the air gets sucked out of the room. After that, they placed an extra ventilator in the rear end of the room to push the air to the front of the room. Now the temperature is almost equal throughout the room. <\/p>\n\n\n\n

    \"\"<\/figure>\n\n\n\n

    By measuring CO2 concentrations, Stal Data can check the minimum ventilation of the ventilation system. The minimum ventilator must be set in such a way that the CO2 concentration never exceeds 3000ppm CO2. When there are more than 3000ppm CO2, the minimum ventilation percentage must be set higher. Besides, when the CO2 is higher in the front of the room than in the rear of the room, it means that the front of the room does not get as much clean air as the part of the room with the lower CO2 concentration. In this way, they can check if the air is distributed equally across the room in the barn. <\/p>\n\n\n\n

    \"\"<\/figure>\n\n\n\n

    2. Ammonia (NH3) concentration<\/strong><\/h4>\n\n\n\n

    Monitoring ammonia gas is also very important, SenseCAP also provides the S2100 LoRaWAN\u00ae DTU<\/a> and NH3 sensor<\/a>. Ammonia is very irritating to the mucous membranes of pigs. For piglets, the concentration should be lower than 8 ppm ammonia. After they are 30 kilos, the concentration should be lower than 15 ppm ammonia.<\/p>\n\n\n\n

    \"\"<\/figure>\n\n\n\n

    <\/p>\n\n\n\n

    \"\"<\/figure>\n\n\n\n

    Why SenseCAP?<\/strong><\/h2>\n\n\n\n

    \u201cWe have used many different CO2 sensors. The main advantages of the SenseCAP sensor are the resistance to water and ammonia. They won’t be easily damaged in humid environments or environments with lots of ammonia. Another benefit is the resistance of the sensor to vibrations. They are very resilient. Compared with other sensors, these CO2 sensors have batteries and are therefore completely wireless. And the SenseCAP can work for many years without replacing the battery. Besides, the sensors are very portable, due to their small size they can easily be located in another spot. They are also very lightweight and can be fixed with a simple tie wrap.\u201d <\/sub><\/mark> \u2014 Stal Data<\/sub><\/p>

    <\/p>

    <\/p><\/blockquote>\n\n\n\n

    \"\"
    Part of the tests that we have conducted on the device<\/em>s<\/sub><\/figcaption><\/figure>\n\n\n\n

    Here\u2019s the newest video of the SenseCAP S210x Series unboxing and shows how to deploy in your area<\/p>\n\n\n\n

    <\/p>\n\n\n\n

    \n