{"id":71584,"date":"2022-09-21T11:47:02","date_gmt":"2022-09-21T03:47:02","guid":{"rendered":"https:\/\/www.seeedstudio.com\/blog\/?p=71584"},"modified":"2022-09-21T11:51:44","modified_gmt":"2022-09-21T03:51:44","slug":"connect-sensecap-s210x-sensors-to-ubidots-using-the-things-network-lns-in-5-steps","status":"publish","type":"post","link":"https:\/\/www.seeedstudio.com\/blog\/2022\/09\/21\/connect-sensecap-s210x-sensors-to-ubidots-using-the-things-network-lns-in-5-steps\/","title":{"rendered":"Connect SenseCAP S210X Sensors to Ubidots Using The Things Network LNS in 5 Steps"},"content":{"rendered":"\n

Ubidots<\/a> is a low-code IoT application development platform that enabled rapidly assembling and launching IoT applications without having to write code or hire a software development team. Nowadays, over 40,000+ applications already connect the dots with Ubidots. To meet the growing need for building IoT applications, we’ve been cooperating with Ubidots and supporting the community to add SenseCAP S210X sensors easily to Ubidots by using The Things Network<\/a> LNS.  The Things Network is a global collaborative Internet of Things ecosystem that creates networks, devices, and solutions using LoRaWAN.<\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

Now, let me show you how to add the LoRaWAN sensor to the Ubidots and start collecting data within 5 steps! Here, let’s take our S2105 Soil Moisture, Temperature and EC Sensor <\/a>as an example:<\/p>\n\n\n\n

Step 1: Configure Sensors via SenseCAP Mate App<\/mark><\/a><\/h3>\n\n\n\n
\"\"<\/figure>\n\n\n\n
\"\"<\/figure>\n\n\n\n

Step 2: Register Sensors on TTN LNS<\/h3>\n\n\n\n

Create an application, click on \u201c+ Add end device\u201d and enter the Device EUI, App EUI, App Key (refer to SenseCAP Mate APP).<\/p>\n\n\n\n

\"\"\/<\/figure>\n\n\n\n
\"\"<\/figure>\n\n\n\n

Step 3\uff1aCreate the Ubidots Plugin and Decoder<\/h3>\n\n\n\n

Go to your Ubidots account, click \u201cPlugins\u201d and create a new \u201cThe Things Stack\u201d plugin.<\/p>\n\n\n\n

\"\"\/<\/figure>\n\n\n\n

Click on the recently created plugin, search for the \u201cDecoder\u201d tab and copy the \u201cHTTPs Endpoint URL\u201d.<\/p>\n\n\n\n

\"\"\/<\/figure>\n\n\n\n
\"\"<\/figure>\n\n\n\n

Step 4: Connect the Ubidots Plugin to TTN<\/h3>\n\n\n\n

Go to your TTN console, click on \u201c+ Add webhook\u201d and search for Ubidots.<\/p>\n\n\n\n

( Plugin ID: It’s from the \u201cHTTPs Endpoint URL\u201d. If your endpoint\u2019s URL is \u201chttps:\/\/dataplugin.ubidots.com\/api\/web-hook\/lN4s2dlb4IgPgpp4Xeoq02stXcE=\u201d then your plugin ID is just \u201clN4s2dlb4IgPgpp4Xeoq02stXcE=\u201d ) <\/p>\n\n\n\n

\"\"<\/figure>\n\n\n\n

Step 5: Power on the Device and Start Monitoring<\/h3>\n\n\n\n

Now you can monitor the soil moisture temperature and EC data on the Ubidots platform!<\/p>\n\n\n\n

\"\"\/<\/figure>\n\n\n\n

You might want to monitor other parameters. Here at Seeed, we\u2019ve developed a series of LoRaWAN sensors specifically focusing on environmental monitoring:<\/p>\n\n\n\n

S2100 LoRaWAN Data Logger<\/a><\/p>\n\n\n\n

S2101 Air temperature and humidity sensor<\/a><\/p>\n\n\n\n

S2102 Light intensity sensor<\/a><\/p>\n\n\n\n

S2103 CO2, temperature, and humidity Sensor<\/a><\/p>\n\n\n\n

S2104 Soil moisture and temperature sensor<\/a><\/p>\n\n\n\n

S2105 Soil moisture, temperature and EC sensor<\/a><\/p>\n\n\n\n

With the IP66 enclosure that supports -40 ~ +85C \u00b0operating temperature, a built-in 19Ah high-capacity battery, and its low power consumption, the S210X sensors can operate in harsh outdoor environments for up to 10 years with a maximum of 10km coverage. The built-in Bluetooth facilitates setup has greatly reduced the cost of large-scale deployment so that you can deploy devices with easy set-up and receive data in minutes.<\/p>\n\n\n\n

\n