This product will EOL soon, please consider the Grove - Variable Color LED V1.1 as alternative choice. Thank you!
This product consists of one 8mm RGB LED. It operates at 5V DC. When SIG pin is logic LOW, the RGB LED will show. Perfect for use on Seeeduino digital outputs, or also can be controlled using pulse-width modulation. And uses three adjustable resistor to change the color of the RGB LED.
For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before your using of the product.
|Dimensions||130mm x90mm x19mm|
|Grove - Variable Color LED||1|
Grove - Variable Color LED
This Grove consists of one 8mm RGB LED. It operates at 5V DC. When SIG pin is logic HIGH, the RGB LED will light up. Perfect for use on Seeeduino digital outputs, or also can be controlled by pulse-width modulation. And it uses three adjustable resistor t
Question by: admin on 2018-12-18 02:38:50
Please give me an example how to modify it. Thanks.Answer by: admin on 2018-12-18 02:38:50
On a Grove Base Shield, should this be plugged into an Analog or Digital connection.
After that how best should it be controlled.
As an RGB LED it needs three signals, 1 for each colour yet the connectors only have AO and A1 or A1 and A2 etc.Question by: admin on 2018-12-18 02:38:50
Dear Julian Bourne.You can refer to this wiki:http://www.seeedstudio.com/wik....Answer by: admin on 2018-12-18 02:38:51
I can not get the sample code to work, the light is on but I cannot control it with a touch button. Any ideas????Question by: admin on 2018-12-18 02:23:46
HI there, please send email to email@example.com and provide the hardware connection and software code. We can do the simulation. thanks.Answer by: admin on 2018-12-18 02:23:46