XBee-PRO 900HP embedded modules provide best-in-class range wireless connectivity to devices. They take advantage of the DigiMesh® networking protocol, featuring dense network operation and support for sleeping routers, and are also available in a proprietary point-to-multipoint configuration.
Who Viewed This Also Viewed
• Perior outdoor LOS range of up to 28 miles with the high-gain antenna• Simplified AT command set or advanced XBee API accelerates time to market• Over-the-air firmware updates via other XBee-PRO 900HP modules or Device Cloud by Etherios™• Software-selectable channel mask for interference immunity• Advanced sleep modes include sleeping routers, pin sleep, cyclic sleep• Easy to use, share a common hardware footprint and available in a variety of different protocols• Enabling users to substitute one XBee for another with minimal development time and risk.
Supporting RF line-of-sight ranges up to 28 miles (with high-gain antennas), and data rates of up to 200 Kbps, these modules are ideal for extended-range applications requiring increased data throughput.
The XBee-PRO 900HP requires no programming and can be configured easily using Digi’s free X-CTU software or via a simplified AT command set. XBee modules are pre-certified for use in multiple countries, further reducing development costs and time to market.
• Processor: ADF7023 transceiver, Cortex-M3 EFM32G230 @ 28 MHz• Frequency Band: 902 to 928 MHz, software selectable channel mask for interference immunity• Antenna Options: Wire, U.FL and RPSMA• RF Data Rate: 10 Kbps or 200 Kbps• Indoor/Urban Range: 10 Kbps: up to 2000 ft (610 m); 200 Kbps: up to 1000 ft (305 m)• Outdoor/ Line-Of-Sight Range : 10 Kbps: up to 9 miles (14 km); 200 Kbps: up to 4 miles (6.5 km) ( w/ 2.1 dB dipole antennas)• Transmit Power: Up to 24 dBm (250 mW) software selectable• Receiver Sensitivity: -101 dBm @ 200 Kbps, -110 dBm @ 10 Kbps• Data Interface: UART (3V), SPI• GPIO: Up to 15 Digital I/O, 4 10-bit ADC inputs, 2 PWM outputs• Networking Topologies: DigiMesh, Repeater, Point-to-Point, Point-to-Multipoint, Peer-to-Peer• Spread Spectrum: FHSS (Software Selectable Channels)• Supply Voltage: 2.1 to 3.6 VDC• Transmit Current: 215 mA• Receive Current: 29 mA• Sleep Current: 2.5 uA