nRF52832-MDK V2 IoT Micro Development Kit

The nRF52832-MDK V2 is a fully open-source, plug-and-play, versatile single board development kit for Bluetooth® low energy, ANT and 2.4GHz proprietary applications using the nRF52832 SoC.

The kit gives access to 24 I/Os and interfaces via headers and has a RGB LED which is user-programmable. It also has a 2.4GHz chip antenna onboard which is quite convenient to develop IoT wireless applications.

It supports the Nordic offical SDK using GCC, Keil and IAR. Program/Debug options on the kit is DAPLink.

The nRF52832-MDK V2 can also be used to play with multi-frameworks such as: nRF5 SDK, nRF5 SDK for Mesh, Mbed OS 5, Zephyr, Mynewt, JerryScript, Espruino, MicroPython, Web Bluetooth, Eddystone, etc.

Hardware Specification

nRF52832-MDK V2 provides the following hardware features:

• Nordic Semiconductor nRF52832

• ARM® Cortex™-M4F

• 512kB Flash Memory + 64kB RAM

• Bluetooth low energy, ANT and 2.4GHz

• NFC™-A tag

• Program/Debug options with DAPLink

• MSC - drag-n-drop programming flash memory

• CDC - virtual com port for log, trace and terminal emulation

• HID - CMSIS-DAP compliant debug channel

• Up to 24 GPIOs at headers

• Reset Button

• RGB LED

• 2.4GHz chip antenna

• 3.3V regulator with 1A peak current output

• VBUS & VIN Power-Path Management

• Breadboard-friendly

• 63mm x 18mm x 4mm without headers soldered in

DAPLink Integrated

Arm Mbed DAPLink is an open-source software project that enables programming and debugging application software on running on Arm Cortex CPUs. Commonly referred to as interface firmware, DAPLink runs on a secondary MCU that is attached to the SWD port of the application MCU. Enumerating as a USB composite device, it creates a bridge between your development computer and the CPU debug access port. DAPLink enables developers with:

• MSC - drag-n-drop programming flash memory

• CDC - virtual com port for log, trace and terminal emulation

• HID - CMSIS-DAP compliant debug channel

Pinout Diagram