CAN-BUS Shield

CAN-BUS Shield

SKU 103030008
23.50
DISCONTINUED
This item is no longer available.

Description

This product is upgraded to a new version.
 
CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability. It is commonly found on modern machine tools and as an automotive diagnostic bus. This CAN-BUS Shield adopts MCP2515 CAN Bus controller with SPI interface and MCP2551 CAN transceiver to give your Arduino/Seeeduino CAN-BUS capibility. With an OBD-II converter cable added on and the OBD-II library imported, you are ready to build an onboard diagnostic device or data logger.
 
Features
  • Implements CAN V2.0B at up to 1 Mb/s
  • SPI Interface up to 10 MHz
  • Standard (11 bit) and extended (29 bit) data and remote frames
  • Two receive buffers with prioritized message storage
  • Industrial standard 9 pin sub-D connector
  • Two LED indicators
 
Documents
 

Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to ourforum.

Technical Details

Dimensions0mm x 0mm x 0mm
WeightG.W 48g    
BatteryExclude

ECCN/HTS

ECCNNot Available
HSCODE8543909000

Documents

Reviews

Questions and Answers

SUBMIT
0
Can I use the DB9 connector for the CANH and CANL or is it only for OBDII?
on Oct 19,2016
Reply upvote ()
yes, it will work.
on Oct 20,2016 10:50 AM
Reply upvote ()
I had connect to a car before, and had read out something successful.
on Oct 20,2016 10:50 AM
Reply upvote ()
Yes, but is the DB9 connector expecting only OBD pinning (lo on pin 5, hi on pin 6, gnd on pin 4) or does it simultaneously support standard can pinning (lo on pin 2, hi on pin 7, gnd on pin 3) ?
on Nov 02,2016 01:42 AM
Reply upvote ()
Reply
0
How many messages that I can send into this can bus shield?
on Oct 19,2016
Reply upvote ()
0
Buy $11.9 CAN-BUS shield here: http://www.elecfreaks.com/stor...
on Oct 19,2016
Reply upvote ()
0
I tried using two arduino unos with shield and loaded the code from the wiki: https://github.com/Seeed-Studi....It keep saying CAN initialization failed. Does anyone els
on Oct 19,2016
Reply upvote ()
Hi Randy, on the new version CS pin is connected to D9 by default. So the code should be changed to "MCP_CAN CAN(9);" for new CAN BUS shield.
on Oct 20,2016 10:49 AM
Reply upvote ()
Thanks!!! You solved my problem... it made me crazy.... "Enter setting mode fall" every time i've tried..
on Oct 20,2016 10:49 AM
Reply upvote ()
Reply
0
Hi,If you ever do another PCB revision, would you consider adding a solder bridge to select where the interrupt pin goes to (pin 2 or pin 3 ). Then the user could configure it in the same way as the chip select (pin 9 or 10) by cutting and solderi
on Oct 19,2016
Reply upvote ()
Thanks for your suggestion, we would take it into consideration if it's useful to many people. Thanks.
on Oct 20,2016 10:48 AM
Reply upvote ()
Reply
0
HiIf you
on Oct 19,2016
Reply upvote ()

    View History

    CAN-BUS Shield

    SKU 103030008
    $23.50
    DISCONTINUED
    This item is no longer available.
    $23.50/ 1pcs+
    • Description
    • Technical Details
    • Reviews
    • Questions and Answers
    Notify me when it's back in stock
    SUBMIT