Grove - Base Shield

Grove - Base Shield

SKU 103030014
8.90
DISCONTINUED
This item is no longer available.

Description

This product was replaced by a updated version Base Shield V1.3 (SLD01099P).
 

Base Shield V1.3

 
This is the new version of Electronic Brick Shield. We standardize all the connectors into 4 pins(Signal 1,Singal 2,VCC and GND) 2mm connectors, which simplify the wiring of electronics projects. The 4pins buckled connectors also make the wiring situation more stable. We build all kinds of Twigs to match up with Stem, still don't you need to worry about the compatibleness between stem and your existing Electronic Bricks.We have many kinks of converter cables(still increasing) to deal with the compatibleness.This is very similar in fashion to an Arduino shield board, and in fact is used as such with our Seeeduino or Mega board.In v1.0b, we move in the analog connectors a little so that it will fit the higher power connector and USB connector.
 
Base Shield is compatible with Seeeduino or Arduino UNO and Duemilanove.
 
 

 

 

 

 

 

For all Grove users (especially beginners), we provide you guidance PDF documents. Please download and read through Preface - Getting Started and Introduction to Grove before your using of the product.
 
Documents

Please visit our wiki page for more info about this product. It will be appreciated if  you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our forum.

Technical Details

Dimensions0mm x 0mm x 0mm
WeightG.W 20g    
BatteryExclude

ECCN/HTS

ECCNNot Available

Reviews

Questions and Answers

SUBMIT
0
Is it compatible with Arduino Due ?
on Oct 19,2016
Reply upvote ()
0
Does it work with Arduino/Genuino 101?
on Oct 19,2016
Reply upvote ()
0
The Base Shield comes back? And if when?
on Oct 19,2016
Reply upvote ()
This product has shut down and you can choose Base Shield v1.3 if you wanna buy it. Thanks.
on Oct 20,2016 10:48 AM
Reply upvote ()
Reply
0
Please let me know whether the Arduino UNO R3 is compatible with the Grove Base Shield which comes with the Grove Starter Kit Plus.
on Oct 19,2016
Reply upvote ()
Of course, the base shield is designed for Arduino/Seeeduino.
on Oct 20,2016 10:47 AM
Reply upvote ()
Reply
0
Hi,as they just now created a realy new interesting Arduino board named Yun could you please tell me if your Base Shield v1.2 could works (for all GPIO) with this Yun board ?<a href="http://arduino.cc/en/Main/ArduinoBoardYun?from=Main.Arduin
on Oct 19,2016
Reply upvote ()
Hello Miguipda. Yes it works with Arduino Yun. It's because that the Grove Base Shield is a shield which only extends the I/O ports of Arduino Board. If you want to control anything on Arduino Yun, other devices/modules connected to the Grove Base Shie
on Oct 20,2016 10:47 AM
Reply upvote ()
Reply
0
Hi,could you please tell me if this base shield could or not be used with the Arduino Leonardo ?http://arduino.cc/en/Main/ardu...Sincerely thanks.Mi
on Oct 19,2016
Reply upvote ()
And with Arduino Uno could I use this grove base shield with I2C & SPI ?
on Oct 20,2016 10:46 AM
Reply upvote ()
Reply
0
Hi,As I want to buy a Seeeduino Ethernet I need first to know if I may connect on it a Relay Shield v2.0 then also put on this Relay Shield v2.0 a Base Shield v1.2.After that as we can see on the wiki pages you often talk about D5 and D6
on Oct 19,2016
Reply upvote ()
Here is the cable:http://www.seeedstudio.com/dep... just try~
on Oct 20,2016 10:46 AM
Reply upvote ()
Reply
0
Hi,is it possible to use the Gove Base Shield 1.2 with a Seeeduino Ethernet ?http://www.seeedstudio.com/dep...Sincerely thanks and have a nic
on Oct 19,2016
Reply upvote ()
And if I use a Relay Shield V2.0 is it possible to put this Base Shield 1.2 on the Relay Shield ?http://www.seeedstudio.com/dep...Sincerely thanks and
on Oct 20,2016 10:46 AM
Reply upvote ()
Reply
0
I use Arduino Uno and Grove Base Shield to read the data from Grove Gyro, Grove Accelerometer and Grove Compass. As I understand, I must connect said sensors to I2C sockets (there are 3 of them on Base Shield). Sensors that connected to I2C-1 and I2C-2
on Oct 19,2016
Reply upvote ()
Hi,only two I2C ports on Base Shield.Please look carefully , G/V/A5/A4 is a anolog port. G/V/A4/A5 is a I2C port.
on Oct 20,2016 10:44 AM
Reply upvote ()
Reply
0
Is it compatible with Seeeduino Stalker v2.2 board? I would like use this base shied for 'Grove - 80cm Infrared Proximity Sensor'.If it is compatible can I packed it in 'Seeeduino Stalker v2 enclosure' ?
on Oct 19,2016
Reply upvote ()
yes,it is.Base shield is compatible with Seeeduino Stalker.And you can use this base shied for 'Grove - 80cm Infrared Proximity Sensor'But in our test,data is different between Seeeduino and Seeeduino Stalker,may they have a little difference.
on Oct 20,2016 10:42 AM
Reply upvote ()
Reply

    View History

    Grove - Base Shield

    SKU 103030014
    $8.90
    DISCONTINUED
    This item is no longer available.
    $8.90/ 1pcs+
    • Description
    • Technical Details
    • Reviews
    • Questions and Answers
    Notify me when it's back in stock
    SUBMIT