Open Parts Library-Basic V2
This product was discontinued. You can try similar products below:
Compares to OPL v 1.0, OPL-Basic v2.0 makes its mark on
1)Lighter weight (40% lighter)
2)More economical (10% cheaper)
3)More reliable with belt package
OPL-Basic v2.0 is a package of 90+ kinds of components. Such components are commonly-used, quality reliable, DFM friendly and have sufficient stock. Also, their eagle library is free to download. This little package can greatly increase the efficiency for design reference and supply chain optimization.
Here is the Parts List of OPL-Basic v2.0
Here are the features.
Including IC, resistor, capacitor, inductor, diode, transistor, crystal oscillator, connector and fuse, etc., components in OPL (Open Parts Library) are selected according to their popularity, practicality and compatibility in open source community. For example, Atmega 328p, 16M Crystal Oscillator and mini USB are all collected to provide more convenience in product design and save you some time in component sourcing.
We also collect wishes from you and then update the components in OPL every 6 months.
In Seeed, OPL-Basic v2.0 components have been bought, sold, produced, inspected, for thousand times, it also tested and verified on many products. It is proved that their supply channels are stable and reliable. The quality of the OPL components is expectable.
All the components in the OPL are moderately large and with normal package, which are available for hand-placing and hand-soldering, bringing you convenience in making a prototype. When in the stage of bulk production, such components are easy to be manufactured. No need for particular device or high-accuracy equipment, their manufacturability is friendly.
Our goal is to keep all the OPL components always ready. Since the quantity of the OPL components is monitored by safety stock and our long-term cooperative suppliers assist with continuous supply, you can always find the OPL components here in Seeed.
Beside components package, OPL also provides services to support your design on prototyping stage. We accept small orders from 2 pieces to 10 pieces and promise to ship them within 3 days. For more details, please click here (quickly making prototypes).
With Open source eagle library and 3D-Module (download)
Commonly used components
Reliable quality and sufficient stock
Easy for hand-soldering & production effectively
|Dimensions||310mm x235mm x90mm|
Question by: admin on 2018-12-18 02:34:14
Hi Mehmet, now you can get the individual parts here http://www.seeedstudio.com/dep...Answer by: admin on 2018-12-18 02:34:14
Question by: admin on 2018-12-18 02:34:13
what do i think? i think that i already have the OPL and pads for 0603 are too small..Answer by: admin on 2018-12-18 02:34:13
The pads for the 0603 parts are too small to hand solder. I solder surface ICs OK but these pads are killing me. Also the silk screen around the pads are too close, possibly making wetting the pads difficult. Have you soldered with these parts on the OQuestion by: admin on 2018-12-18 02:34:13
603 parts take some practice. The easiest way is to tin one pad, and then place your iron on that pad (preferably with a fine tip), place the part with a set of tweezers, then remove the iron while holding the part in place. Then you can tack the othAnswer by: admin on 2018-12-18 02:34:13
Is there a way to replenish the parts in this kit, or do I have to order another complete kit?
ThanksQuestion by: admin on 2018-12-18 02:34:13
so far we sell the individual parts offline. just send me an e-mail to email@example.comAnswer by: admin on 2018-12-18 02:34:13