EHB-CB Energy Harvesting Board for DSC
This is a Energy Harvesting Board specially designed for DSC. It's MPPT (Maximum power point tracking) function can efficiently manage the power generated by DSC. The output power is DC 3V/5V switchable and automatically switched over to CR2032 battery when the stored power is low.
We provide two types of board, the EHB-SB Energy Harvesting Board for DSC and EHB-CB Energy Harvesting Board for DSC. The SB version use a super capacitance and the CB version use the lipo baterry.
This board is still in beta, so you will find a jump wire at the back of the board. If you care about that, please think twice before buying.
|Dimensions||102mm x85mm x0mm|
|EHB-CB Energy Harvesting Board for DSC||1|
Hi on my EHB-SB I cannot make the LED work, regardless of how the switches are set. Other than that the board seems to be working - voltages are present. Any hints on that?Question by: Szymon Slupik on 2019-04-09 18:43:52
Hi there, you have to put the SW3 1 to ON position, do not need to care about the 2. If the voltage is below 2.7v, it will be off. Or else, it will be on. How is our output voltage? Is it above 2.7v? thanks.Answer by: admin on 2019-04-10 02:39:12