RPLiDAR A1M8 360 Degree Laser Scanner Kit - 12M Range
- 2+: $94.90
- 50+: $89.00
RPLIDAR A1 is a low cost 360 degree 2D laser scanner (LIDAR) solution developed by SLAMTEC. The system can perform 360degree scan within 6meter range. The produced 2D point cloud data can be used in mapping, localization and object/environment modeling.
RPLIDAR A1’s scanning frequency reached 5.5 hz when sampling 360 points each round. And it can be configured up to 10 hz maximum.
RPLIDAR A1 is basically a laser triangulation measurement system. It can work excellent in all kinds of indoor environment and outdoor environment without sunlight.
If you need a different range, we can provide two other models.
RPLiDAR A2M8 360 Degree Laser Scanner Kit - 12M Range Here
RPLiDAR A2M6 360 Degree Laser Scanner Kit - 18M Range Here
￭Measures distance data in more than 8000 times/s
￭360 Degree Omnidirectional Laser Range Scanning
￭8000 times sample rate,the highest in the current economical LIDAR industry
￭OPTMAG Original Design,prolong the life-span
￭Configurable Scan Rate from 2-10Hz
￭Ideal for Robot Navigation and Localization
￭Plug and Play
￭Home service /cleaning robot navigation and localization
￭General robot navigation and localization
￭Smart toy’s localization and obstacle avoidance
￭Environment scanning and 3D re-modeling
￭General simultaneous localization and mapping (SLAM)
|Dimensions||98.5mm x70mm x60mm|
|Distance Range||0.15 - 6m,White objects|
|Angular Range||0-360 Degree|
|Scan Rate||1~10Hz,Typical 5.5Hz,|
|RPLIDAR A1（PWM motor driver embedded）||1|
|RPLIDAR A1 communication cable||1|
Where can I find a pre-compiled windows version of the demo app? There isn't one in the SDK anymoreQuestion by: Todd Krein on 2019-06-05 04:03:22
Hi there, Here is the link. https://github.com/SeeedDocument/forum_doc/raw/master/reg/frame_grabber.zip thanks.Answer by: admin on 2019-06-13 05:57:34
Question by: admin on 2018-12-18 02:24:05
Hi there, the interface is UART and one PWM signal to control the motor. If the PSoc 63 can provides the signals, it will work. please refer to to page 11 Communication interface of the datasheet. **http://bucket.download.slamtec.com/8076da1cf98dd4a6db4029f0133a7f1024198dcb/LD310_SLAMTEC_rplidar_datasheet_A3M1_v1.2_en.pdf** thanks.Answer by: admin on 2018-12-18 02:24:05