This is our brand new product, it is a fantastic HDMI monitor with capacitive touch screen and driver free. It's been tested on Raspberry Pi, beagle bone black, windows 10 and Mac book pro. And it works well on those platform and it really plug and play, all you need to do is to adjust the resolution(on RaspberryPi).
It supports 800x480 resolution and you may find that the pictures are more bright when you are using this display. The capacitive touch function give the user full control over any device. It's driver free for your device due to built-in EDID device information, it is very easy to let the equipment correctly identified the touch screen. And the Capacitive USB touch screen can support functions of the right mouse button and drag and drop, and also support multipoint touch, maximum 10 points.(only test in windows 10)
For use with a Raspberry Pi we suggest editing config.txt to set the HDMI to the native 800x480 in case it doesn't detect the resolution properly.
The easiest way to edit the config.txt is to put the Pi TF card into an every day computer and edit config.txt with any text editor and save.
• Resolution up to 800 x 480
• USB Capacitive touch control
• Free-driver, Plug and Play
• Supports Raspbian, Ubuntu Mate, NOOBS with RaspberryPi
• Supports Debian, Angstrom with BeagleBone
• Supports Windows / Ubuntu / Mac with PC
• Supports Intel-Processor Base MiniPC
• ULP (Ultra Low Power) consumption backlight
If you can not see anything when it attached to your device, please make sure that the HDMI wire is work properly and your device’s resolution is changed to 800x480, If you see this picture, means that you need to change the resolution to 800x480 on your output device.
If you are using Raspberry Pi, you can change resolution by this steps:
Login to your Raspberry Pi and edit /boot/config.txt file, make sure it has following parameter:
hdmi_cvt 800 480 60 6 0 0 0
Save it and reboot your system.
If touch screen is out of work please make sure you connect the Display’s MicroUSB to your device (PC, Raspberry Pi, Beagle bone black etc.)
We are not sure it can work at android system due to it dose not test in android OS yet.
If you find that the screen is blur when you connect it to your device, please check the FPC cable on the back of driver board, it may loose when it was shipping to you. Just pull out the block of the FPC cable and put the FPC wire into it and make sure it fasten tightly and retry it again. Please take care of this cabin cable, it’s connect to the board and send the touch screen data to the chip on the board.
|Dimensions||184mm x106mm x45mm|
|Power||5V Power via USB Micro|
|Display Type||5 inch TFT LCD|
|Touch points||10 points maximum|
|Interface||HDMI & USB 2.0 Full Speed|
|Dimensions without package||133mm x 79mm x 13mm|
|Weight without package||130g|
|5 Inch Capacitive HDMI Display||1|
5 inch 800x480 Capacitive TouchScreen
It's been tested on Raspberry Pi, beagle bone black, windows 10 and Mac book pro. And it works well on those platform and it really plug and play, all you need to do is to adjust the resolution(on RaspberryPi).
The display works great and touch is very accurate.
Does the touch driver work with Windows 10 IOT on RaspberryPi3 or Dragonboard 410c?Question by: John Walsh on 2019-03-09 16:00:16
Hi john, Unfortunately, this screen do not support Win10 IOT touch function. However you still can use it to display. Thanks for your time and interest in Seeed.Answer by: admin on 2019-03-11 08:02:37
Question by: admin on 2018-12-18 02:32:06
No, Tessel2 doesn't have a HDMI interface，so they are not compatible.Answer by: admin on 2018-12-18 02:32:06
I am using this Display with RPI, everyhing works find however: When i Blank the Framebuffer the display turns blak but the BACKLIGHT DOESNT SHUT OFF! is it possible to turn off the backlight of the display? not even if i unplug the HDMI cable the backlight shuts off its very bad to keep the backlight on at all time! Please HELP!Question by: admin on 2018-12-18 02:24:09
Hi there, from the design point of view, we can not turn off the backlight of the display. thanks.Answer by: admin on 2018-12-18 02:24:09
I'm building keypads, will this connect to the 2x20 Raspberry Pi Zero header? I can't have cables hanging out the side of this thing.Question by: admin on 2018-12-18 02:19:50
Also offered here in this site. https://www.seeedstudio.com/3.5-Inch-TFT-Display-for-Raspberry-Pi-Resistive-Touch-Screen-p-2248.htmlAnswer by: admin on 2018-12-18 02:19:50