We will be on National Holiday from Oct. 1st to 7th. Our online shop is open 24/7, but orders will be shipped on Oct 6th. We sincerely apologize for the inconvenience.

Protoshield Kit for ArduinoSKU: STR104B2P

$6.90Reg: $9.90You save: $3.00 
Qty: Add to Wish List
Build your own Arduino shield using the compact and flexible Proto Shield kit. Solder together a limitless range of circuits and reuse it in all your Arduino projects. A standard 0.1" prototyping grid accepts commonly used through-hole parts and chips. You could also find a range of basic components are included to help you get started with your custom shield. 
Features
  • Standard Arduino compatible
  • Large 0.1"*0.1" pitch prototyping area
  • A variety of through-hole sizes to fit most parts
  • Arduino UART and I2C port pin breakout for easy external communications
  • Dual ISP breakouts for easy programming and stacking
  • 3.3 volt, 5 volt, and ground power rails are easily available anywhere on the board
  • Breadboard style prototyping area
  • USB type B breakout
  • Basic components included (buttons, switches, LEDs, resistors, USB jack)
Packing List
  • 1x Arduino compatible Proto Board
  • 1x B type USB connector
  • 1x 40-pin 2.54mm male long header
  • 1x 40-pin 2.54mm female header
  • 2x 40-pin 2.54mm male header
  • 1x 40-pin 2.54mm spacer
  • 3x 8-pin 2.54mm female header
  • 1x 6-pin 2.54mm female header
  • 1x ISP female pin header
  • 1x ISP male pin header
  • 1x 10k Ohm rotary potentiometer
  • 4x 1k Ohm through-hole resistor
  • 2x 10k Ohm through-hole resistor
  • 2x 3mm Red through-hole LED
  • 2x 3mm Green through-hole LED
  • 1x 3mm dual color through-hole LED
  • 4x Mini push button switch
  • 2x DPDT switch
Documents

Please visit our wiki page for more info about this product. It will be appreciated if  you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our forum.

Overview

Shield


Weight: 37.92 g

Distributors in North America
United States
Canada
Mexico
Puerto Rico
Honduras

Want to know more about the soul of LinkIt ONE? MediaTek Labs provides LinkIt SDK for Arduino, with which you develop Sketches in Arduino IDE that you run on LinkIt ONE. There is a Developer’s Guide that will help you get started with the SDK and LinkIt APIs, as well as an online API reference. And when you come to taking your prototype towards deployment, there is a Hardware Reference Design package containing schematic, layout and datasheets to help you create your own product using Seeed Studio’s Fusion PCBA Service.

To find out more check out the LinkIt section on the MediaTek Labs site and register here or check out the resources below.

Recommended Products

Recent History

Protoshield Kit for Arduino$6.90