
Xadow Basic Sensors integrates three different sensors on one single board:
3-Axis Accelerometer for motion detection, activity monitoring and speed tracking
Dual diode Digital Light Sensor that can separately measure infrared, full-spectrum or human-visible light
Temperature Sensor for temperature monitoring
Features
Three-in-one sensor board
Plug-and-play if connected with RePhone Kit Create
Open source and modular design
Slim and small
Built-in 11 PIN Xadow Connectors for full flexible connection with other Xadow Modules
Stackable, chainable and sewable with other Xadow Modules
We will be keep updating the source code on our github page:
The schematic diagram of Xadow Basic Sensors is provided in the following link:
Check more info about the datasheet for each sensors:
And the MCU STM32F030F4:
Technical details
| Dimensions | 25.37mm x17mm x2mm |
| Weight | G.W 4g |
| Battery | Exclude |
| Microcontroller | STM32F030F4 |
| Core | ARM® 32-bit Cortex® -M0 CPU |
| Power Supply | 3.3 – 6 V (via breakout pins) |
| Flash | 16 KB |
| SRAM | 4 KB |
| Clock Speed | 48 MHz |
| Operating Temperature Range | -30°C to 70°C |
| Interface | Interface with Xadow GSM+BLE through I2C (7-bit address 0x03) |
| Test Range | ±2g (default), ±4g, ±8g, or ±16g |
| Resolution | Increase with g range, up to 13-bit resolution at ±16g |
| Dynamic Range (Lux) | 0.1 to 40,000 Lux |
| Dual Photodiodes | Infrared and full spectrum |
| Temperature Range | -55°C to 125 °C |
| Accuracy | ± 2°C from -25°C to 100°C; ± 3°C from -55°C to 125°C |
Part List
| Xadow Basic Sensors | 1 |
| FPC Cable | 1 |