Bus Pirate v3.6 universal serial interface

SKU: THM180C4M
$27.15
Qty:
Add to Wish List
Ship from:

In stock
=

$29.50
$0.65 saved

Bus Pirate v3 is a universal bus interface that talks to electronics from a PC serial terminal. Get to know a chip without writing code. Eliminates a ton of early prototyping effort with new or unknown chips. A laser cut acrylic case for Bus Pirate v3.6 is also available.
 
Protocols
 
1-Wire, I2C, SPI, JTAG, asynchronous serial (UART), MIDI, PC keyboard, HD44780 LCDs, and generic 2- and 3-wire libraries for custom protocols.
 
Features
  • USB interface, USB powered
  • 5volt tolerant pins
  • 0-6volt measurement probe
  • 1Hz-40MHz frequency measurement
  • 1kHz-4MHz pulse-width modulator, frequency generator
  • On-board multi-voltage pull-up resistors
  • On-board 3.3volt and 5volt power supplies with software reset
  • Macros for common operations
  • Bus traffic sniffers (SPI, I2C)
  • Transparent USB to serial bridge mode
  • 10Hz-1MHz low-speed logic analyzer
  • Custom support in AVRDUDE , Flashrom , OpenOCD
  • AVR STK500 v2 programmer clone
  • Scriptable from Perl, Python, etc.
  • A bootloader for easy USB firmware updates
  • Uses DP6037 standard PCB layout
  • Open source (CC 0/Public Domain)
Support
If you encounter any problems when using this product, here is the forum from which you can get the technical support.

Staff Picked


Recent History


Similar Products

  • Base Shield V2
    $8.90
  • Open Workbench Logic Sniffer
    $50.00
  • Grove - Screw Terminal
    $2.90
  • XBee Shield V2.0
    $9.90
  • Grove - I2C Hub
    $2.90
  • Screw Shield
    $7.50
  • HDMI to VGA Adapter
    $9.90
  • Bus Pirate v4
    $37.15
  • MicroSD Card Adapter for Raspberry Pi B
    $3.90
  • Bees Shield
    $9.50
  • Grove - Bee Socket
    $6.90
  • Grove - XBee Carrier
    $15.95
Procurement Service