The Danger Shield is an add-on for the [Arduino] micro controller board. It contains a variety of fun and useful electronic circuits that you can use to do fun and useful things. It is a fully self-contained shield. You plug it into your Arduino, and you can immediately start using it. No extra things to hook up, no external components. Just a really rad board ready to rock.
What is it for? Whatever you want to do with it!
Some of the features of the board are: - 3 x linear sliders w/ integrated LEDs (each independently hooked up to PWM)
- 03 x pushbuttons
- 2 x indicator LEDs (each with a PWM)
- 1 x piezo buzzer (for making noise!)
- 1 x temperature sensor
- 1 x light sensor
- 1 x knock sensor
- 1 x 7 segment LED (with shift register)
- power LED and reset button
Kit Content
. | ID | Item | Qty | Type |
. |
| Danger Shield v1.0 PCB | 1 | pcb |
. | DIS1 | 7 Segment LED, green, 0.3in | 1 | component |
. | IC1 | 74HC595N | 1 | component |
. | JP1 | .100 breakaway header | 5 | component |
. | LED1-3 | 5mm green LED | 3 | component |
. | R1-R3, R7 | 10K ohm resistor | 4 | component |
. | R4, R5, R9-R11, R19 | 560 ohm resistor | 6 | component |
. | R6, R12-R18 | 680 ohm resistor | 8 | component |
. | R8 | 1M ohm resistor | 1 | component |
. | S1-S4 | Omron B3F-1000 Button | 4 | component |
. | SG1, SG2 | 12mm Piezo Buzzer | 2 | component |
. | SLIDER1-3 | Bourns PTL60 Green | 3 | component |
. | IC2 | LM35DZ | 1 | component |
. | R20 | LDR | 1 | component |
. | JP2 | .100 breakaway header | 40 | component |
Enjoy soldering them :)
>>Guide
This product was added to our catalog on Saturday 04 October, 2008.
