IoTea LoRa SmartAgriculture
PM2.5 PollutionVisualization WioLTE
Who Viewed This Also Viewed
This is a SMD BLE module used in our BLE Bee and Xadow BLE. It is based on TI cc2541 chip, enables robust network nodes to be built with low total bill-of-material costs and highly suited for ultralow power consumption systems. The module is small and easy to use, with the preprogrammed firmware of manufacturer, you can quickly build BLE communications via its AT command. Supporting BLE communications with iphone, ipad and Android 4.3.
Bluetooth protocol: Bluetooth Specification V4.0 BLE
Working frequency: 2.4 GHz ISM band
Interface way: a serial port
Open environment within 30 meters can realize communication between modules
To send and receive no byte limit between modules
Modulation method: GFSK (Gaussian Frequency Shift Keying)
Transmission power: - DBM, 23-6 DBM, 0 DBM, 6 DBM, can be modified by the AT command
Use TI CC2541 chip, configuration space of 256 KB, support the AT command, the user can according to need to change the role (master, slave mode) and the serial port baud rate, name of equipment, matching parameters such as passwords, use agile.
Wiki of Bluetooth V4.0 HM-11 BLE Module
You say it is compatible with devices that have BT4.0. Please point me at a detailed example.
As this module cannot work alone, you can refer to the BLE BEE with this module on, we have shared an apk for android phones to connect. http://www.seeedstudio.com/wik...
Hi there~ This module support android4.3 and above devices. Regards
HM-10S, It have 34 Pads. HM-10C only has 26 Pads. HM-10C is equal HM-10S removed bottom Pads. thanks.
i can use this module as Ibeacon ?
Yes. Please refer to "bluetooth40_en.pdf" in http://www.jnhuamao.cn/bluetooth40_en.zip for more details.
This is correct, but the HM-11C and HM-11S the pictures on the bluetooth40 Pdf are the identical. I send email to the manufacturer, Jnhumao.cn but until now not receive answer