Seeed’s LTE CAT.1 Pi HAT is an open source cellular extension modem for Raspberry Pi, based on u-blox LARA-R2xx series. It compatible with Raspberry Pi 1 Model B+ and later versions.
LTE CAT.1 Pi HAT is designed for LTE Category 1 networks and with 2G fallback(EU version only). Embedding common protocols, like TCP/UDP, HTTP.
LTE CAT.1 Pi HAT support UART and USB interfaces. By UART, Raspberry Pi communicate with LTE CAT.1 Pi HAT via AT command without any special driver. It’s well suited for building prototyping rapidly.
Compatible with Raspberry Pi 1 Model B+ and later versions
LTE CAT.1 and support 2G fallback(EU version only)
UART and USB interface for communicate
Support Grove I2C and Digital connector
Protocols on cellular module
Embed TCP/UDP stack
Embed HTTP, FTP, SSL
Dual stack IPV4/IPV6
3GPP TS 27.007 , TS 27.005  standard AT command
Smart home devices
Other scenario need cellular networks
|Dimensions||65mm x56mm x18.5mm|
|LTE Cat 1 Pi HAT (Europe)||1|
Face Recognization Smart Lock with LTE Pi HAT
In this project, we plan to take pictures with picamera and recognise faces in them, then display recognition result in the screen. If faces known, open the door, and send who opened the door to specified phone number via SMS.
Wiki of LTE Cat 1.Pi HAT
Question by: admin on 2018-12-18 02:24:23
Hi, pi3-disable-bt disables the Bluetooth device and restores UART0/ttyAMA0 to GPIOs 14 and 15 for uart communication. thanks.Answer by: admin on 2018-12-18 02:24:23