This is a A 16-bit, 5V tolerant input-only buffer for the Open Logic Sniffer logic analyzer.
16 input-only channels
Populated with the ON Semi MC74LCX16245DTG Transceiver.
All inputs are 5V tolerant, can take up to 7V signals for short durations.
Propagation delay of 4.5 nS, making the Buffer Wing capable of 200 MHz
Supports live insertion and removal
The 16-bit Buffer Wing does not ship with the headers populated in order to allow the end user the greatest flexibility in deciding the final configuration.
If you encounter any problems when using this product, here is the forum from which you can get the technical support.
|Dimensions||70mm x50mm x5mm|
I've purchased an 16-bit Input Buffer Wing with an Open Workbench Logic Sniffer plus four probe cables
I placed my order on Saturday 9 July 2011, the material was shipped on Tuesday 12 July and it left Hong Kong for its destination onQuestion by: admin on 2018-12-18 02:39:22
Hi,if you use Arduino? If so, you can use Soft serial .Answer by: admin on 2018-12-18 02:39:22
15$ is pretty hefty imho: the chip costs ~1$, the board could easily be made smaller, the second header is not included.
but nice to have the opportunity to buy it, thanksQuestion by: admin on 2018-12-18 02:39:22
Hi,please visit our wiki,there is some picture show how to connect it to Arduino.Answer by: admin on 2018-12-18 02:39:22
i would like to know,
1. how can i read 200MHz data ,from my PC ?
2. buffer size?
3. any delphi source code samplesQuestion by: admin on 2018-12-18 02:39:21
It just a RFID card reader as I know .The problem is every card have a unit card UID ,if it can be emulated ,it is insecure.Answer by: admin on 2018-12-18 02:39:21
For adding connectors to the board I would like to know whether the board is RoHS compatible, i.e leadfree solder used?Question by: admin on 2018-12-18 02:39:21
Please try to use the wiegant mode.Answer by: admin on 2018-12-18 02:39:22