Sipeed Longan Nano - RISC-V GD32VF103CBT6 Development Board with Acrylic Case
Longan Nano is a development board based on GD32VF103CBT6 MCU with RISC-V 32-bit core of GigaDevice. Longan Nano sold by Seeed comes with a 0.96inch 160x80 IPS RGB LCD and an acrylic transparent case.
We've just released the Wio Lite RISC-V (GD32VF103) - With ESP8266, which is a GD32 MCU based RISC-V board. With the onboard WiFi and Lipo charging circuit, it is more suitable for IoT applications.
Sipeed Longan Nano is a development board based on GD32VF103CBT6 MCU with RISC-V 32-bit core of GigaDevice. It is convenient for students, engineers and geek enthusiasts to contact the new-generation RISC-V processor. Longan Nano sold by Seeed comes with a 0.96inch 160x80 IPS RGB LCD and an acrylic transparent case.
GD32VF103CBT6 is a Bumblebee core based on Nuclei System Technology. Support RV32IMAC instruction set and ECLIC fast interrupt function. Core power consumption is only 1/3 of that of traditional Cortex-M3.
Longan Nano development board, double-row pin layout design, needle spacing 700 mil, can be inserted directly into breadboard; on-board 8M passive crystal oscillator, 32.768 KHz RTC low-speed crystal oscillator, Mini TF slot, and use Type-C USB interface.
Longan Nano supports multiple download methods: USB DFU download, UART ISP download, JTAG download. In the USB DFU download mode, you only need a USB Type-C cable to download the program to the development board. At the same time, Longan Nano supports the standard JTAG interface, which can be debugged online using the in-store RISC-V debugger or any JTAG-enabled debugger such as J-Link.
Meanwhile, Sipeed has adapted the PlatformIO IDE for the Longan Nano development board, which can be visually developed on multiple platforms such as Windows/Linux:
- Chip built-in 128KB Flash, 32KB SRAM
- 4 x general purpose 16-bit timer, 2 x basic 16-bit timer, 1 x advanced 16-bit timer
- Watchdog, RTC, Systick
- 3 x USART, 2 x I2C, 3 x SPI, 2 x I2S, 2 x CAN, 1 x USBFS (OTG)
- 2 x ADC (10 channel), 2 x DAC
|CPU||GD32VF103CBT6 based on RISC-V 32-bit core|
|Kernel power consumption||Only 1/3 of the traditional Cortex-M3|
|Chip built-in||128KB Flash, 32KB SRAM|
|Peripheral||● 4 x general purpose 16-bit timer, 2 x basic 16-bit timer, 1 x advanced 16-bit timer
● Watchdog, RTC, Systick
● 3x USART, 2 x I2C, 3 x SPI, 2 x I2S, 2 x CAN, 1 x USBFS (OTG),
● 2 x ADC (10 channel), 2 x DAC
|IDE||PlatformIO IDE, Support debugging, Arduino|
|Compile Toolchain & Debugger||GCC, OpenOCD|
|Storage expansion||Short body TF card slot|
|Display expansion||8pin 0.5mm FPC Block Expansion 160x80 RGB IPS LCD (SPI Interface)|
|Debug interface||2x4 pin leads to JTAG debug interface|
|Connector||Double row 2.54 pitch pin|
|Crystal||8MHz Passive High Speed Crystal +32.768KHz Low Speed RTC Crystal|
|Sipeed Longan Nano Development Board||x1|
|0.96inch 160x80 IPS RGB LCD||x1|
|Acrylic transparent case||x1|
LEARN AND DOCUMENTS
SHARED BY USERS
from order viewVery nice RISC-V board
from order viewThis is a interesting board and the screen is pretty nice. The board however suffers for the lack of documentation that all the boards with the GD32VF103 processor.
from order viewGreat introduction to Risc-V devices
Great little board for Rust developmentBesides supporting C++ development, the Longan Nano is also well-supported by Rust. So if you've ever wanted to try embedded Rust, this is a good choice.
Regardless of which language you choose, this board is a great value, with more features than boards that typically cost four times as much.
fast and cheepbit of a learning curve, grate