Wio LTE - Cat M1/NB1

Wio LTE - Cat M1/NB1

SKU 102991016
59.00
38 Available
$59.00/ 1pcs+
$57.00/ 10pcs+
$55.00/ 20pcs+

Description

The Wio LTE Cat M1 / NB1 is an exciting IoT focused addition to our Wio cellular series which will provide you a more convenient IoT design and prototyping experience. The board features a M4 processor, a ublox modem with the new LTE Cat M1 and NB1, GNSS, and more.


LTE Cat M1 & NB1 (NB-IoT) & GNSS


LTE categories M1 and NB1 have been designed with IoT design and deployment in mind. These new categories operate at lower frequencies enabling them to operate at a longer range and with more penetration capability. In addition the cost point of these new technologies will be cheaper due to the physical silicon chips using smaller areas and using older processes. To top it off the power consumption is lower than other LTE technologies. Cat M1 is capable of 375 kb/s download and upload speeds as well as VoLTE, while Cat NB1 is capable of  27.2 kb/s download speed with 62.5 kb/s upload speed.

This Wio board is a global solution. The hardware is capable of operating in all regions, reducing the needs to source multiple versions. The board is compatible with major GNSS including GPS, BeiDou, GLONASS, and Galileo.


Chose Your Development Enviorment

The board is powered by a STM32 Cortex-M4 and supports Arduino, MBed, and Espruino allowing developers to choose that which they are more comfortable with. Also included is an micro SD card slot for data logging.


Grove Enabled

All 3.3v Grove modules are supported which give us wide-range possibilities of applications for prototyping. With the onboard 6 Grove connections, developers can create any combination of our 180+ sensors and actuators to build a project and solve any problem. Simplifying the prototyping and development phase is our goal.

So, welcome on board to the future of IoT development!





ItemDescription
CPU&StorageSTM32F405RG, ARM Cortex-M4, CPU running up to 168MHZ
1Mbytes Flash
192+4KBytes RAM
SystemOperating voltage: 3.3V
Low power: Sleep / Standby modes / Stop
CRC-32 generator
LTE ConnectivityLTE CAT M1 and NB-IoT, Cat M1 Half-duplex (375 kb/s DL and
UL) Cat NB1 Half-duplex (27.2 kb/s DL, 62.5 UL)
Embed
protocol: TCP/UDP /FTP/HTTP/HTTPS/FTPS/TLS/MQTT/CoAP

GNSS
GPS / GLONASS
2.5m CEP(GPS), 4.0m CEP(GLONASS)
Peripheral
1 x USB for power supply and DFU
JST 1.0 connector for battery
3 Buttons: 1. for Reset 
                  2. for User function
                  3. into upload mode
Nano SIM and TF card 2 in 1 socket
Grove
2 x Digital Port
2 x Analog Port
1 x UART
1 x I2C


Technical Details

Dimensions140mm x 78mm x 28mm
WeightG.W 100g    
BatteryExclude

Part List

Wio LTE - Cat M1/NB11
LTE Antenna1
GPS Antenna1

ECCN/HTS

ECCN3A991.a

Reviews

Questions and Answers

SUBMIT
0
Hello, Please let me know about power consumption in low power and stby mode. Thank you for the reply.
on Aug 17,2018
Reply upvote ()
Hi there, Deep sleep mode, turn off all functions, require external wake-up (wake only by Reset) 200uA. thanks.
on Aug 21,2018 15:14 PM
Reply upvote ()
Hi there, Deep sleep mode, turn off all functions, require external wake-up (wake only by Reset) 200uA. thanks.
on Aug 21,2018 15:14 PM
Reply upvote ()
The above power consumption refers to total board consumption ? Can we wake up this board from STM32F405RG microcontroller or not? Thank you for your answer
on Aug 21,2018 19:10 PM
Reply upvote ()
Hi there, it is whole board consumption. Yes, it can be waked up from STM32. thanks.
on Aug 22,2018 09:50 AM
Reply upvote ()
Reply
0
Hello, please let me know who supports SIMs in Spain for this device and its coverage if possible. Thanks
on Sep 07,2018
Reply upvote ()
Hi David, We see Vodafone works with u-blox on the NBIOT. You can contact u-blox Spain office to double confirm. **https://www.u-blox.com/en/about-us/sales-network-offices?f%5B0%5D=field_location_region%3A8&f%5B1%5D=field_location_country%3A38**. We use SARA-R410M 02B. Here is the product summary. thanks.
on Sep 07,2018 09:38 AM
Reply upvote ()
Here is the product summary. **https://www.u-blox.com/sites/default/files/SARA-R4-N4_ProductSummary_%28UBX-16019228%29.pdf** thanks.
on Sep 07,2018 09:38 AM
Reply upvote ()
Reply
0
Any suggestions for who supports SIMs for North America for the device. ATT or Verizon? thanks
on Aug 18,2018
Reply upvote ()
It supports Tmobile. thanks.
on Aug 22,2018 09:58 AM
Reply upvote ()
This module supports global LTE Cat.NB bands, but only some mobile carrier has built their NB network , now ,T-Mobile is support NB network in part of US city, and we have finished test in Seattle US. thanks.
on Aug 22,2018 10:07 AM
Reply upvote ()
Reply
0
Hi there, does this board supports NB-IoT from SingTel in Singapore?
on Oct 08,2018
Reply upvote ()
Hi there, we use SARA-R410M-02B module, From the datasheet, it supports Multi Region. please drop a mail to support_ap@u-blox.com to double confirm or give a call to u-blox Singapore Pte. Ltd. Phone: +65 6734 3811.thanks.
on Oct 09,2018 18:02 PM
Reply upvote ()
Reply
0
Best regards, I have 2 questions: 1- Does this module operate in Colombia (South America)? 2- since this module is LTE, it also includes 3G and 2G? Thanks for the reply.
on Jun 19,2018
Reply upvote ()
Hi, Bernardo , this board only support LTE Cat.M and Cat.NB1, do not support 3G or 2G. The moudle is ublox SARA-R410M-02B, which supports global use on bands 2, 3, 4, 5, 8, 12, 13, 20, 28. thanks.
on Jul 17,2018 08:46 AM
Reply upvote ()
Reply

    View History

    Wio LTE - Cat M1/NB1

    SKU 102991016
    $59.00
    38 Available
    $59.00/ 1pcs+
    $57.00/ 10pcs+
    $55.00/ 20pcs+
    • Description
    • Technical Details
    • Learn
    • Reviews
    • Questions and Answers
    Notify me when it's back in stock
    SUBMIT