
Note:
With an integrated T-CON timing controller, the reTerminal E1003 enables full-display refresh in just 3 seconds, significantly improving responsiveness compared to typical ePaper update performance. It’s ideal for smart home dashboards, control panels, and dynamic status displays that require faster visual feedback with minimal delay.
The reTerminal E1003 works with SenseCraft Seeedash, a no-code UI design platform with ready-to-use templates for quickly creating and deploying dashboards. With built-in touch support in the SenseCraft Seeedash firmware, you can wake the display with a simple tap and navigate between pages naturally, making multi-page dashboards easier and more intuitive to use.
With built-in touch support, the reTerminal E1003 lets you interact directly with on-screen content—make selections, confirm tasks, adjust settings, or control connected functions. This transforms the display from a passive information screen into an intuitive interactive interface for smart home control, status dashboards, checklists, kiosks, and other customized applications, making everyday interactions faster and more natural.
The 10.3-inch ePaper display with 1404 × 1872 resolution and 16-level grayscale support delivers richer visual detail compared to typical monochrome ePaper panels. Whether showing dashboards, UI layouts, or data visualizations, the reTerminal E1003 provides clearer structure, improved readability, and more flexibility for information-rich interfaces.
Equipped with a built-in 3000mAh battery, the reTerminal E1003 runs up to 6 months on a single charge in the low power mode under a once-per-day refresh scenario. With no wiring required, it can be easily deployed on walls, desks, or anywhere dashboards and control panels are needed.
Leveraging Seeed Studio’s extensive OEM/ODM expertise, the reTerminal E1003 can be customized to fit your exact needs. Whether you require specific sensors, modified I/O configurations, or tailored UI designs, it’s built to adapt—ideal for industrial, educational, or personal use.
Product Name | reTerminal E1003 |
Processor | ESP32-S3 with 8MB PSRAM |
Storage | 32MB Flash, support Micro SD card |
Display | 10.3" Monochrome/ 16-level Grayscale |
Resolution | 1404x1872 Pixels |
Micro SD Card | Maximum support 32GB SD card, FAT32 format |
Wireless Connectivity | 2.4GHz 802.11 b/g/n Wi-Fi, Bluetooth 5.0 |
Sensor | Temperature, humidity sensors |
Microphone | Reserved for voice interaction application |
Buzzer | Buzzer for sound alert |
Battery | 3000mAh |
Power Input | USB-C 5V/1A |
Software | Default firmware support SenseCraft Seeedash(SenseCraft Seeedash) |
Support Arduino/PlatformIO development platform | |
Working Temperature | 0-40°C |
Dimensions | 224mm*187mm*18.6mm |
ePaper Device Comparison
ePaper Devices in Comparison | reTerminal E1001 | reTerminal E1002 | reTerminal E1003 | reTerminal E1004 | ||
Display | Size | 7.5'' | 7.3'' | 10.3'' | 13.3'' | |
Color | Monochrome | Full-color | Monochrome | Full-color | ||
Grayscale | 4 | / | 16 | / | ||
Resolution | 800×480 | 800×480 | 1404×1872 | 1200×1600 | ||
Partial Refresh | ✅ | ❌ | ✅ | ❌ | ||
Refresh Rate | 2-5s | 15-20s | 2-3s | Around 20s | ||
MCU | ESP32-S3 | ESP32-S3 | ESP32-S3 | ESP32-S3 | ||
Enclosure | Metal | Metal | Metal | Metal | ||
SD Card Support | ✅ | ✅ | ✅ | ✅ | ||
Battery | Capacity | 2000mAh | 2000mAh | 3000mAh | 5000mAh | |
Monitoring | ✅ | ✅ | ✅ | ✅ | ||
Touch | ❌ | ❌ | ✅ | ❌ | ||
Expansion Interfaces | UART & I2C | UART & I2C | I2C & GPIO | I2C & GPIO | ||
Compatible Software | ||||||
Certifications | FCC/CE/TELEC/ PSE/ROHS/UKCA | FCC/CE/TELEC/ PSE/ROHS/UKCA | FCC/CE | FCC/CE | ||
MSRP | $69.00 | $99.00 | $159.90 | $279.90 | ||
reTerminal E1003 ePaper Display | X1 |
USB Type-C Cable | X1 |
3D Printed Stand | X1 |
Screw Driver | X1 |
Screw | X1 |
reTerminal E1003 is a 10.3 inch touch-supported, open-source monochrome ePaper display featuring 16 levels of grayscale and a high-resolution of 1404×1872 pixels, with up to 6-month battery life. Powered by ESP32-S3, it natively supports our SenseCraft Seeedash no-code UI platform for effortless dashboard creation. Whether for smart home dashboard visualization and control, office information displays, or educational projects, this ready-to-use touch-enabled device delivers stunning visuals and flexible customization to meet all your needs.