2.8  TFT Touch Shield

2.8 TFT Touch Shield

SKU 104030022
49.50
DISCONTINUED
This item is no longer available.

Description

This product was replaced by a updated version 2.8'' TFT Touch Shield V2.0 (SLD10261P).
 

2.8'' TFT Touch Shield V2

 
2.8'' TFT Touch Shield is an Arduino UNO/ Mega compatible multicolored TFT display with a 4-wire resistive touch-screen. It is available in an Arduino shield compatible pinout for attachment. The TFT driver is based on ST7781R with 8bit data and 4bit control interface. 
  • Arduino UNO Rev3 / Mega Shield compatible footprint.
  • TFT
  • Resolution : 240 x 320 pixels
  • Size : 2.8" (50.0 x 69.2 x 2.5 mm)
  • Colors : 262K
  • Backlight : LED
  • Driver IC: ST7781R
  • 4-Wire resistive touch screen
Application Ideas
  • As a general purpose Graphic display for Arduino compatible devices and any MCU.
  • Touch based inputs.
Documents
 
Please visit our wiki page for more info about this product. It will be appreciated if  you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our forum.

 

Technical Details

Dimensions0mm x 0mm x 0mm
WeightG.W 40g    
BatteryExclude

ECCN/HTS

ECCNNot Available

Reviews

Questions and Answers

SUBMIT
0
i recently bought the tft shield v2 and i keep this error when i compilefatal error: TFTv2.h: No such file or directorydid I install wrong?
on Oct 19,2016
Reply upvote ()
No,this RTC used I2C communication ,can't change baud rate .
on Oct 20,2016 10:42 AM
Reply upvote ()
Reply
0
Can I use it as a simple serial (UART) LCD display? you know, two wires and send just characters?
on Oct 19,2016
Reply upvote ()
Yes, just change the code is OK.
on Oct 20,2016 10:41 AM
Reply upvote ()
Reply
0
Radio Shack is clearing these the V1.0 board for US$17! (at least at my local store). For Mega be sure to "change the 33 line "#define SEEEDUINO" to "#define MEGA" in the TFT.h file" as noted on <a href="http://www.seeedstudio.com/wiki/TFT_Touc
on Oct 19,2016
Reply upvote ()
HI, there's no "#define SEEEDUINO"... in the library now, you can find "#if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)" in the library. But the designer forgot to fix the wiki. You can use it with Mega directly, and it didn't wo
on Oct 20,2016 10:49 AM
Reply upvote ()
Reply
0
How do I connect the Touch Shield to the Arduino Mega 2560, I am having some trouble with the Pins, can some one help me?
on Oct 19,2016
Reply upvote ()
Actually it can connect to Mega2560 directly. It's no need to modify anything of the library.
on Oct 20,2016 10:49 AM
Reply upvote ()
Reply
0
When i plug it in i just get a blank white screen. Please Help
on Oct 19,2016
Reply upvote ()
Could you show us more information about your operation? Or you can drop us a line via clicking the button of Feedback@Support at the bottom of website.
on Oct 20,2016 10:48 AM
Reply upvote ()
please mail to tickets@seeed.uservoice.com
on Oct 20,2016 10:52 AM
Reply upvote ()
Reply
0
Is this compatible with the Leonardo? I saw on the wiki demo sketch here http://www.seeedstudio.com/wik... that there was a definition included for the Leonard
on Oct 19,2016
Reply upvote ()
Thanks for your attention, the libraries of TFT v1 can't support leonardo, we will upgrade it later.Thanks.
on Oct 20,2016 10:48 AM
Reply upvote ()
Modified the TFT library to work with leonardo. Can see changes necessary here:http://www.seeedstudio.com/for...Hope this helps.
on Oct 20,2016 10:50 AM
Reply upvote ()
Thanks for your share. We have add it to Product's FAQ (http://support.seeedstudio.com....
on Oct 20,2016 10:50 AM
Reply upvote ()
Reply
0
It appears that outdated products are still available from reputable sources. (RADIO SHACK). V1 screens dont work even after all your suggestions, not even going to bother with V2. this isnt a question, your forum sucks. Heres the question: having prob
on Oct 19,2016
Reply upvote ()
3open arduino software .(I didn't install it right the first time and didn't have an ARDUINO folder in my PROGRAM FILES folder, make sure u do ) goto FILE then SKETCHBOOK then LIBRARIES then (if u nstalled correct) you'll see a list starting with draw
on Oct 20,2016 10:48 AM
Reply upvote ()
Reply
0
Hi, I am using your 2.8'' TFT Touch Shield v1.0 with my Arduino Uno. Using the Arduino 1.0.5 software running Windows. I have read through all the previous questions other people have asked, but haven't found anything helpful. I imported the library fi
on Oct 19,2016
Reply upvote ()
Here is the library that worked for me, https://github.com/yexiaobo-se...I installed version 1.0 and I did the TFT first and the TouchscreenSo far, the
on Oct 20,2016 10:48 AM
Reply upvote ()
Reply
0
How many pins would be used for two colors. text and background?
on Oct 19,2016
Reply upvote ()

    View History

    2.8 TFT Touch Shield

    SKU 104030022
    $49.50
    DISCONTINUED
    This item is no longer available.
    $49.50/ 1pcs+
    • Description
    • Technical Details
    • Reviews
    • Questions and Answers
    Notify me when it's back in stock
    SUBMIT