Light up the dark with custom patterns using the Crazyflie 2.0 LED-ring expansion board. Featuring 12 strong RGB LEDs facing downwards, you can create custom patterns in firmware that you control from your Android/iPhone or computer. Two additional strong front facing LEDs that can be switched on and off, act as headlights.
This product is intended to be used together with the Crazyflie 2.0 nano quadcopter and uses its expansion board system. Please have a look at the buyers guide for more info about Crazyflie 2.0 expansion boards.
DC-DC step-up/down gives stable LED light independant of battery voltage
Create custom patterns using the Crazyflie 2.0 firmware
12 RGB LED modules facing downwards
2 strong LEDs facing forward
Automatic detection of expansion board using 1-wire memory
DC-DC step-up/down gives up to 1A at 3.8V from input between 2-5.5V
12 independantly addressable RGB LED modules facing downwards (
2 strong white LEDs facing forward
1-wire memory for automatic expansion board detection
Designed for mounting under the Crazyflie facing downwards
Size (WxHxD): 33x33x5.5mm
If you have any further question for technical support, please contact firstname.lastname@example.org
|Crazyflie 2.0||Crazyradio PA - long range 2.4Ghz USB radio dongle with antenna||Crazyflie 2.0 debug adapter kit||Crazyflie 2.0 - Buzzer deck|
Free shipping on your first order over $50 or more. Discounted items included!