This little elegant case is officially produced by SeeedStudio and it is probobaly the most suitable case which you can get for ReSpeaker. The design is compact while at the same time provides enough space for one ReSpeaker core plus one ReSpeaker Far-field MIC array. There isn't much ornament except the rounding aperture that makes your voice more reachable and the translucent circular ring that indicates the light being generated from the ReSpeaker inside.
Specifically designed for Respeaker core.
Easy to use
|Dimensions||0mm x0mm x0mm|
|ReSpeaker Pro Case||1|
Question by: admin on 2018-12-18 02:32:05
Hi~This is made for Respeaker core + Respeaker Mic array.So I'm afraid it is not suitable for raspberry pi 3Answer by: admin on 2018-12-18 02:32:05
Question by: admin on 2018-12-18 02:23:41
Hi there, the size of v2 and v1 are totally different. For V2, we have some 3d models for cases, please refer to http://wiki.seeedstudio.com/ReSpeaker_Core_v2.0/#resources. we do not plan to produce a case for v2.0 this moment, thanks.Answer by: admin on 2018-12-18 02:23:41
I'm (successfully) using this case with just the Respeaker Mic Array 2. My question is: what is the included gasket used for?Question by: admin on 2018-12-18 02:23:35
Hi Jeffrey, it is Non-slip mat, you can put it at bottom of the case. thanks.Answer by: admin on 2018-12-18 02:23:35
Question by: admin on 2018-12-18 02:20:05
It fits if you drill the 3.5mm hole from 5mm to 5.5mm and are fine with only using 2 screws instead of 3.Answer by: admin on 2018-12-18 02:20:05