IoTea LoRa SmartAgriculture
PM2.5 PollutionVisualization WioLTE
hi, how can i stop playing mid track?"If you want to stop decoding a in the middle, set SM_CANCEL, and continue sending datahonouring DREQ. When SM_CANCEL is detected by a codec, it will stop decoding and returnto the main loop. The stream
In the demo code, we use button to stop playing track. If you look at the code, you can know how it works.
The shield is working fine with the musicPlayAll code i.e the one which uses the inbuilt SD library of arduino.while using the same setup if i upload the MusicShieldNewSDLib codes using the FAT 16 LIBRARY then it shows " Fat16::initerror: open file
Please try as the link here: http://seeedstudio.com/wiki/Mu...
I'm using an Arduino UNO and a ping sensor with your shield and need to be able to change the volume within the Arduino IDE. I've tried using the command Mp3SetVolume since it's defined within player.cpp but it has not worked.
I also need to be a
Let's not worry about the portpins.h issue, I can handle that on my own. I'm using the musicPlayAll demo file for Arduino 1.0 on an Arduino UNO. When attempting to regulate volume via a ping sensor. I've tried to change the volume within the musicPlayA
I am using a arduino uno with my shield and the code compiles and I have head phones plugged in to the shield but the problem is that I am not hearing anything. I have songs in the sd card. Why am I not hearing anything? Can someone help please. Also w
Arduino IDE 1.0 is a little bit different with upload step.So confirm you did correct step.
And the libraries is put in the right folder.
Watch your voice button, may be not loud enough.
Anyway, it should be w
Can I listen streaming audio with this shield? (internet radio, etc)
Sorry , it can not because the music IC doesn't has this function.
Hi! Would you apply few changes (see commits at https://github.com/amperka/mus... to make the library compatible with filename-case-sensitive OS'es and with Arduino UNO? It would be
Hi Mihail ,very thanks for your advice. We will consider it ,and the next version of this board is developing , will consider your opinion .
Hi there, Please could you guide us to find all the .mp3 files in the sub-directory?? (Not in root directory )Thanks
Hi, the problem is the file library we are using is not allow to find file in the sub-directory.So you need to find other file library first .
This is not really a question. I would like to share how I made the latest library work.If you use http://seeedstudio.com/wiki/Fi...you should
yeah,the latest library is update recently ,so do the wiki will update in a time.
I am running successfully Music Shield Libary for arduino 1.0(void play();).
I bypassed pins 5,6,9 to be use in a simple application (writeAnalog(x,y) to turn on/off leds. (According to wiki page this can be done if one does not use
No , this servo need to control every time .
I am unable to change the songs in the music shield ! I have double checked from my side! Please find the problem because it has got to do with the ever upgrading library of FAT ! So please upgrade your code according to the latest library and get it w
Hi,thereWe are now doing the upgrading for the Musicshield,It should be release on 10 days.That time you can find the new version firmware on the wiki.
I have recently purchased some Music Shields and they are not working at all. The Music Shields boards are version 1.2. I have tried software version 1.14 with Arduino version 022 and version 1.2 with Arduino version 1.0.The both version of the
Hi,thereYou can try to delete all the library you download,and try the Demo 1,and get some mp3 file in your SD,and try it again.And if not ok,you can catch the picture of the Serial monitor's message.
Hello, I was happy with my Shield but unfortunately it received a really strong impact and the main play button is damaged now. Do you sell a replacement button? What solutions are there available?
Dear customer , for your issue ,please kindly email to our QC department: QC@seeedstudio.com
Hello, I would like to know if the shield is compatible with Arduino Leonardo.
Hi , it can't at this version .
Hi there, please tell me can I get access to SD card files from another part of my sketch for write or delete a file? Or only this shield has access to card?
Hi,Dear.You can compile a program to write or delete a file of SD card by this shield or others.It's all available.
Wow, this can really playback multiple sound files simultaneously? Really? Most audio shields I see can only play one sound at a time. Has this functionality been confirmed?
Also, if this actually works- is there any idea about what the theoretic
Hi,what do you mean it playback multiple sound files simultaneously ? If you mean that play multiple sound files in the some SD card ?If so , it can be .
is it possible play multiple sound files at same time?
yes , it is , just the sound type must be : MP3,WAV,MIDI,Ogg Vorbis
Can this board encode DTMF?
No,it can't.More details you can read the datasheet of IC VS1053B
I was understanding that this shield came with the Ipod dock already. The one I received does not.
Hi,the Ipod dock is on the back,please confirm it again.And if you still have this problem please put a post on our wiki or drop a line to email@example.com,and show the pictures of your shield.
I use a Musik Shield V1.2 with a Arduino Uno. When I conntect the Musik Shield with a amplifier (with the headphone conection) the the SD card turns permanent unreadable, if the same power source is aplied to both the Arduino and the amp.To acc
Did I get this right: This shield dose not work propperly with arduino? --_ Please update this issue in the description! So people can order a seeduino with the shield and save a lot of time.
Is there a alternate librarie that sup
When I loaded up the example musicPlayAll and an SD card (1gb) formatted in FAT 16 using the wikis Method 1 the program hung on initializing the file system. Then I tried Method 2 and that had errors loading the files, so I uncommented the debug in Met
Dear Shayne En.Your post has been answered on forum,please click:http://www.seeedstudio.com/for....
hi i just wanted to know how to stop a mp3 file in the middle and start another file for example i have a button put on the interrupt pin what i want is when i push that button the song will pause or stop and play another song plz give me an ex
Dear Hassan.Most of useful information have been posted on our wiki.The multifunction botton can pause/play/change song.And if you want to do that by interrupt pin,you might refer to example of digitalInputControl,and delete "//" befor "myplayer.attach
Cannot make this work. Are there any updated docs for this the Wiki for this product sucks. Will not buy from Seeed again.
Dear jimmy.Our product will be run well if without no errors.Please make sure you are using the right demo sketch as mentioned in the wiki.Can you give us more details on the problem that you are facing?Or you can search some information from our forum
Hi, I still can't seem to get the music shield to play a single file by name after following the instructions below. The name of the file and what is in the sketch do match. Also I am a little confused as to what libraries and code are current to work
Dear Jeremy.Any errors while compiling?You can refer to here(http://www.seeedstudio.com/for... please follow steps seriously.
Hi,I can get the music shield to play a file placed on an SD card when using the music V1_2 code Demo 1 on the wiki site, but I can't seem to get the Arduino to play a certain file by name when using the other Demo 2 code. It says error opening fil
Dear Jeremy.It's the error of your music name.You can refer to this web site to find more useful information:http://www.seeedstudio.com/for....
Hi. Another question. does it play stereo (two channel) audio?
Hi,Dear.Yes,our earphone does play stereo audio.
Hi. Can you detect when a song is finished?How can you know, which function?
Hi,Dear.You'll see a green LED flash while a song is playing,but you could see nothing flash if songs are not playing.This green LED connect with a pin,and the pin is used as a output of volume,so the LED will flash when songs are playing(you can detec
is it possible to use the music shield as voice commanding device so i can control my own web app (like youtube) without using a screen, keybord or mous?I want to buy an arduino for this project, but i don`t know what shield i need and so on.
The music can't do those as you said. Maybe you can refer to wiki of Music Shield, so you can get a more detailed information about it.Thanks.
Is there a clear example anywhere of how to install the necessary library(s) and simply get this board to play an MP3??? The directions given on the main page http://www.seeedstudio.com/wi
Hey,just try Download File:MusicPlayer v1.7.zip and Fat16 for music shield.then use the example in MusicPlayer v1.7.you can do it^_^
Hello, is it possible to select played song by set a pin? For ex: PIN30 starts playing song a.mp3, but PIN31 gets HIGH, song a.mp3 will be canceled and song b.mp3 will be started?
Of course you can.Maybe you can find some similar programs from our forum(http://www.seeedstudio.com/for....
How can I combine an ethernet shield and the music shield? Also can i use the sd card on the music shield like an sd card from a sd card shield?
Hey,the ethernet shield has something problem while using with other SPI devices,such as Music shield.
Hello,I am trying to combine MusicShield v1.2 device with another arduino devices. But if request playSong() method then the execution flow stops until the song is not played to end. Is it possible to use asynchronous like request that doesn't bloc
Hi Sergey Kim.Maybe your devices have occupied the same I/O which have been used by music shield. As for asynchronous communication,maybe you can have a try.
First: thanks for the nice board! I'm working on a opensource project, called "Admiral Midi", using your board as a basis. So if I get this working, more peoples will buy it.. ')The idea is to have a fast and simple GM module tweaked for guitar
Ok, I've got the board completely working with Arduino's standard SPI library!look here for the full source!http://www.vsdsp-forum.com/php...
I have a arduino-based project where I need all 6 analog pins (used by the shield for VS1053 communcation) and I can't use this shield as it is. If I don't plug it into arduino directly but connect the VS1053 pins to some other digital pins could it wo
Perfect ! Thank you very much :D
Finally (after much web research) for MP3s to play just fine using code from GitHub. WAV files play, but they are filled with static. Original files are fine - 44.1 khz 16 bit WAV. Anyone else have issues with WAV playback specifically and if so, sugge
Hi Jeremy dePrisco:
The Music Shield can support many forms of music:MP3,WAV,MIDI,Ogg Vorbis.But we pay more attention to MP3,so MP3 files work well with Music Shield.
And as for MAV,we just have a elementary library for it,so if the freque