2.8 TFT Touch Shield V2.0

2.8 TFT Touch Shield V2.0

SKU 104030004
19.90
50+ Available
$19.90/ 1pcs+

Description

This is a multifunctional Arduino/Seeeduino/Arduino Mega compatible resistive touch screen. It can be used as display device or sketch pad.Compared with the previous version, 2.8’’TFT Touch Shield V1.0, we replaced the screen driver with a more professional chip, ILI9341 driver, providing different pin-saving SPI communication without sacrificing the data transmitting speed. Due to the communication method change, programs developed for the original version need modifications before being transplanted to the new version. With a SD card module integrated also on this shield, this shield reserves great room for other expansions to your project.


Features

  • Big screen for easy and comfortable experience

  • Backlight controllable via programming

  • 65535 rich colors display

  • SPI pin-saving communication method

  • Full screen touch active range


Technical Details

Dimensions100mm x 66mm x 30mm
WeightG.W 56g    
BatteryExclude

Part List

2.8 TFT Touch Shield V2.01

ECCN/HTS

ECCNEAR99
HSCODE9013803010

Certification

CertificationFCC

Reviews

Questions and Answers

SUBMIT
0
I am fairly new to this, so I decided to use this shield to make an interactive resistor calculator. I downloaded the libraries and figured out how to insert my own colors using HEX. But no matter how many combinations I try for Brown it always comes out looking blue or green. Any suggetsions?
on Apr 13,2017
Reply upvote ()
Hello, seems that it need a bit more in-depth debugging that we can do via comments. Please contact techsupport@seeed.cc with your set up, the code you’re using, and any errors you might be getting. Thanks.
on Jan 09,2018 10:45 AM
Reply upvote ()
Reply
0
Will this work with Arduino 101?
on Dec 25,2016
Reply upvote ()
Ron, I read your question, then 10 minutes later I was kickin' around Github downloading libraries for this TFT screen and came across a possible solution for you. I didn't do any of this work, just happened to stumble across it... https://github.com/Seeed-Studio/TFT_Touch_Shield_V2/commit/f21a027d2cf3362f1ea99edba79f6e8358d9ca2c
on Jan 06,2017 05:41 AM
Reply upvote ()
Reply
0
Easy enough to use, but you'll have to modify or write your own library for more capabilities such as landscape mode. My only real problem, and it's a big one, is that the shield physically occupies the entire board and covers up all of the pins.<p
on Oct 19,2016
Reply upvote ()
Thought I had a solution. I bought a Sparkfun ScrewShield, inserted it BETWEEN my SainSmart UNO and the 2.8 TFT. Don't do that. Doesn't work! Makes an OK flashlight, but that's it. It may work if I can put the ScresShield BELOW the UNO. My Sainsmart UNO doesn't have long pins on the bottom so i can't test that theory now. Will have to wait till I get home and try on a REAL Arduino with long header pins. I'll report back later.
on Jan 06,2017 05:52 AM
Reply upvote ()
Reply
0
Hello, Has anyone used the sd card feature? I would like to store images, as well as write some stuff. Is there any library out there? thanx!
on Sep 12,2018
Reply upvote ()
Hi there, it uses the SPI for the SD card operation. So you can use the arduino SD library. **https://www.arduino.cc/en/Reference/SD** . you also can refer to **https://www.instructables.com/id/UNO-R3-28-TFT-Touch-Screen-With-SD-Card-Socket-for/** thanks.
on Sep 13,2018 13:59 PM
Reply upvote ()
Reply
0
When hooking this up by jumpers do I use the ISCP block or the digital pins 11, 12 and 13
on Jan 09,2018
Reply upvote ()
Hi there~ You can use ISCP pins, Or you can use pin D11 D12 D13 after you solder P1,P2,P3.Regards.
on Jan 09,2018 10:23 AM
Reply upvote ()
Reply
0
the paint example does not work. I tried to uploud it and an error came up saying that the SeeedTouchScreen.h isn't there. I downloaded the file from git hub and included it in the software through manage libraries in sketch. what should I do.
on Jul 17,2017
Reply upvote ()
Hi there~ Sorry to keep you waiting so long~You need to download the touchscreen driver of seeed at first.Please click here to download ### https://github.com/Seeed-Studio/Touch_Screen_Driver/archive/master.zip ### Then add it to your Arduino IDE.It should be OK.For more info. You can refer to our wiki. Regards
on Jan 09,2018 10:44 AM
Reply upvote ()
Reply
0
hola ya encontre la libreria pero quisiera me ayudaran para trabajar con la sd biene algun tipo de sd especial para este shield muchas gracias
on Nov 14,2016
Reply upvote ()
hola use 2GB micro SD card
on Nov 15,2016 18:39 PM
Reply upvote ()
Reply
0
hola buen dia porfavor me podrian ayudar como encuentro la libreria de este producto para subirla a arduino estoy confundido soy nuevo en esto muchas gracias espara un proyecto con arduino mega
on Nov 13,2016
Reply upvote ()
Please download the library from the following link https://github.com/Seeed-Studio/TFT_Touch_Shield_V2/archive/master.zip
on Nov 28,2016 18:05 PM
Reply upvote ()
Reply

    View History

    2.8 TFT Touch Shield V2.0

    SKU 104030004
    $19.90
    50+ Available
    $19.90/ 1pcs+
    • Related
    • Description
    • Technical Details
    • Learn
    • Reviews
    • Questions and Answers
    Notify me when it's back in stock
    SUBMIT