Short for Near Field Communication, NFC is a widely used technology around us. It's behind daily applications such as access control system and mobile payment system. NFC Shield features a highly integrated transceiver module PN532 which handles contactless communication at 13.56MHz. You can read and write a 13.56MHz tag with this shield or implement point to point data exchange with two NFC Shields.
In this new version, we assign an independent PCB antenna which can easily stretch out of any enclosure you use, leaving more room for you to design the exterior of your project.
The PCB comes stuck on the shield, but you can easily peel it off.
5cm max effective range
SPI pin saving interface
Serve for contactless communication at 13.56MHz
Support P2P communication
Support ISO14443 Type A and Type B protocals
Please visit our wiki page for more info about this product. It will be appreciated if you can help us improve the documents, add more demo code or tutorials. For technical support, please post your questions to our forum.
|Dimensions||100mm x 65mm x 30mm|
|NFC Shield V2.0||1|
Use NFC shield to build paper man can interact with Android smart phone
This is a remote control car. Not controlled by ubiquitous remotes, like joystick, but a set of NFC cards. That makes it a challenge to rational thinking. Want it run smoother and faster? That depends on how you design the commands set it executes. Fundam
I would like to use this with an axial inductor as an antenna. Does anyone know what the inductance of the supplied antenna is?
When I tried to wrote the tag(Mifare-One RFID card (13.56Mhz)) which I also bought here.
I got an error message: block authentication failed for 4
Could someone help me with that.
I was wondering, is it possible to turn this device off and on? I require an NFC board that could be turned on at some specifiek moments. And the RF needs to be off the rest of the time.
Can anyone explain the difference between RFID shield v2.1 and RFID shield v2.0?
Is it possible to use this reader with a raspberry (with a raspbian disitribution)?
Hello Guys , Can it work with TFT 2.8 TouchScreen Shield V2 ?
Hello ! Is it possible to have the schematics of the board ? thanks
Didn't find PN53x board -
Hello everyone - I've run into a blocker with the NFC Shield v2.0 attached to my Uno.
Background - I've had a chance to read several threads on getting connected with the Shield, and I followed all the right steps ou
Free shipping on your first order over $50 or more. Discounted items included!