the AI Hardware Partner
Toggle Nav
Loading...

Spresense Main Board - CXD5602 Microcomputer for IoT Application

The Spresense project consists of an Arduino compatible board with Sony’s high-performance CXD5602 micro-controller. The CXD5602 has built-in GPS and high-resolution audio capabilities.

$55.00
Out of stock
  • 10+: $52.00

PRODUCT DETAILS

Description

Spresense is a compact development board based on Sony’s power-efficient multicore microcontroller CXD5602. It allows developers to create IoT applications in a very short time and is supported by the Arduino IDE as well as the more advanced NuttX based SDK.

  • Integrated GPS - The embedded GNSS with support for GPS, QZSS, and GLONASS enables applications where tracking is required.
  • Hi-res audio output and multi-mic inputs - Advanced 192kHz/24 bit audio codec and amplifier for audio output, and support for up to 8 mic input channels.
  • Multicore microcontroller - Spresense is powered by Sony's CXD5602 microcontroller (ARM® Cortex®-M4F × 6 cores), with a clock speed of 156 MHz.

The Spresense main board has the following features.

  • Sony’s CXD5602 Processor

  • 8 MB Flash memory

  • PCB with small footprint

  • Dedicated camera connector

  • GNSS (GPS) antenna

  • Pins and LEDs

    • Multiple GPIO (UART, SPI, I2C, I2S)

    • 2 ADC channels

    • Application LED x 4 (Green)

    • Power LED (Blue)

    • USB serial port

CXD5602 specifications

High-precision Positioning Features

  • Ultra-low power consumption
  • Multiple GNSS systems supported:
    GPS, GLONASS, SBAS, Galileo, and Beidu

Advanced High-Resolution Audio features

  • 192 kHz/24 bit High-Resolution Audio Codec
  • 192 kHz A/D converter
  • 8 channel microphone inputs (for digital microphones)
  • Full digital amplifier with BTL stereo output

Extensive computing power

  • Hexa-core ARM® Cortex®-M4F
  • FD-SOI technology for low-power processing
  • ASMP framework for inter-CPU communication

overview hardware mainboard signal

NameDescription

[PWR] Power LED

Power LED. Emits blue light when power is supplied.

[RST] Reset button

Reset button.

[LED0] to [LED3]

Four user controllable green LEDs.

[CN2]

Micro USB Type-B connector.

[CN4]

B-2-B 100-pin connector to interface to additional boards. This connector is on the underside.

[CN5]

Camera connector.

[BR] Boot recovery button

This is used when restoring to the factory reset state. Only for recovery, normally not needed.

1 x Spresense main board

ECCN/HTS

HSCODE 8517180050
USHSCODE 8543708800
EUHSCODE 8543709099
COO JAPAN
RoHS 1

LEARN AND DOCUMENTS

Documentations

This section outlines the Spresense hardware and software in the following two chapters:

To start programming the Spresense directly see the Getting started guides for the two available SDKs:

For further information on CXD5602, please refer to the following.

SHARED BY USERS

REVIEWS

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account

FAQ