LoRa Modules: How to Choose the Right One for Your IoT Project
The rapid expansion of the Internet of Things (IoT) has created increasing demand for wireless
Tech
tech – trends and insights
tech – open tech tree
tech – Shenzhen Lab
Seeed Studio Announces Supports for NVIDIA’s Next-Generation Jetson T2000 & T3000 Modules for Scalable Edge AI and Robotics
SHENZHEN, China, July 13, 2026 — Seeed Studio, today shares with all developers that we’ll
Wio-S3 Module: Multi-Protocol Connectivity Powered by ESP32-S3 with Wi-Fi, BLE & LoRa
Get One Now: Wio-S3 Wireless Module Introduction: Enabling Flexible Wireless Connectivity for Next-Generation IoT Devices
reSpeaker Clip: An Open Wearable AI Recorder for Building Voice AI Applications
Capture conversations. Connect with AI. Build your own voice intelligence. As AI continues to move
Rust, Embedded Rust, and µFerris: An Open Source Learner Board Built Around Seeed Studio XIAO
Why Rust, and Why Embedded? Over the past few years, Rust has evolved from an
Meet XIAO nRF54LM20A (Sense): Motion Wake-Up. Always Connected. Built for Ultra-Low Power
Introducing Seeed Studio XIAO nRF54LM20A (Sense): Nordic nRF54LM20A Board for Matter, Thread & Ultra-Low-Power IoT. It features Bluetooth LE 6.0, Matter, Thread, Zigbee, 28 GPIOs, 2 MB Flash, 512 KB RAM, and optional IMU and microphone for battery-powered IoT, wearables, and edge sensing applications.
ESP32-C5 for Home Assistant: Why Choose It Over ESP32-C6 for Smart Home Projects?
ESP32-C6 has become the default choice for many ESPHome and Home Assistant projects—but where does ESP32-C5 fit? This guide compares ESP32-C5 vs ESP32-C6, explores ESPHome compatibility, and shows how XIAO ESP32-C5 can be used to build modern smart home devices.
How to choose the Right M12 Lens for Your reCamera
Choosing the right M12 lens reCamera combination is critical for any AI camera project. Even
LoRaWAN vs. Meshtastic: Choosing the Right Network for Your Project
In many real-world scenarios, connectivity requirements can vary significantly. Whether you’re deploying sensors across remote
Meshtastic Cases: DIY Ideas, 3D Prints, and Ready-to-Use Enclosures
Whether you’re carrying a Meshtastic device on a hiking trip, deploying a tracker in the
ESP32 LoRa: Hardware Guide, Setup, and Real-World Range
Off-grid communication used to mean expensive radios or satellite subscriptions. ESP32 LoRa changes that equation.
5 Best DIY Smart Speaker Projects for Home Assistant Voice Assistants
Voice control is a crucial and satisfying layer you can add to a smart home.