Wio Tracker (Wireless Input Output) is an open source gateway which enable faster IoT GPS solutions. It is Arduino and Grove compatible development boards that helps you track nearly any moving thing on the planet and then upload that data wirelessly. The Wio LTE is the LTE version of Wio Tracker, so now we’ve got 2 versions of Wio Tracker and the LTE (4G) version will make some differences.
There are three main updates comparing the Wio LTE to the 2G version. Firstly, from its name we know that the Wio LTE supports LTE (4G) communication which is much faster and popular than 2G. Secondly, the Wio LTE supports in total 4 different GNSS – GPS, Beidou, GLONSS and Galileo, the QZSS is also supported as bonus. With more GNSS support, positioning will be more accurate. Thirdly, the Wio LTE‘s MCU is upgraded to STM32F405RG, which is based on Cortex-M4, makes the Wio LTE 5 times faster than the 2G version. What’s more, the flash and RAM have also been raised to 1Mbytes and 192+4k bytes.
Apart from the three main updates, the LTE version is almost the same as the 2G version. If your project is using the 2G version, it would be very easy to update to the LTE version because we have prepared transplantable and expansible AT command library. The Arduino and Grove compatibility allows for quicker development through numerous libraries and a supportive community. The GPS library which will be available with the board is not just limited to Arduino – it can function just as well if you chose to develop in C/C++. With the onboard 6 Grove connections, developers can create any combination of our 180+ sensors and actuators to build project and solve any problem. Simplifying the prototyping and development phase is our goal.
The Wio LTE is well suited for outdoor projects where the device can connect to the GPS satellites and provide a real-time location of the item it is attached to. The LTE provides a wide bandwidth which allows much faster interaction between the user and device. If you are going to build projects like a bicycle sharing service, tracking pets or livestock, locating a vehicle, or even keeping track of a child, the Wio LTE is the best solution.
The suggest power supply for Wio LTE products is 5V/2A; The board may not be able to power up when the current is below 1A.
Please always plug a 3.7V Lipo battery in case USB power supply is not sufficient.
When the signal is not good, there will be noise while calling.
We have developed 4 different versions of Wio LTE for different regions. This is the Wio LTE US version, except this version, the others also support GNSS, below table shows the difference between each version. For more detail information, please refer to this manual.
Low-cost, low-power LTE connectivity optimized for broad- band IoT applications
Worldwide LTE and UMTS/HSPA+
Embedded power management unit (PMU) featuring ultra-low deep-sleep current consumption
GPS/BeiDou/GLONASS/Galileo and QZSS
Transplantable and expansible AT Command Library for Wio Tracker
Arduino IDE compatible
6 Grove Connectors
Nano SIM and TF card 2 in 1 socket
|Dimensions||54.7mm x48.2mm x0mm|
|Battery||Lithium Cells/Batteries packed with equipment UN3481 -PI966|
|Wio LTE - 4G, Cat.1, GNSS, Espruino Compatible||1|
|Lithium Polymer Battery 3.7V-1050mAH;46.5*45*4.8mm JST1.0||1|
|Micro USB cable,200mm in length||1|
Wio LTE - 4G, Cat.1
The Wiki of Wio LTE - 4G, Cat.1
Wio LTE - 4G, Cat.1, GNSS, Espruino Compatible
Wiki of Wio LTE
Question by: admin on 2018-12-18 02:31:59
The EC21-E board is still undergoing certification. I try not to guess on timelines for certification. As soon as we get certified we will post them on the Bazaar.Answer by: admin on 2018-12-18 02:31:59
Question by: admin on 2018-12-18 02:30:31
Hello Martin~ Thanks for your attention.The EU Version will be available next week.RegardsAnswer by: admin on 2018-12-18 02:30:31
Question by: admin on 2018-12-18 02:30:20
Yes, sure, could you please contact with firstname.lastname@example.org for the purchase order?Answer by: admin on 2018-12-18 02:30:20
Hi, how would I go about reading the remaining voltage on the lipo battery if I'm using Espruino? ThanksQuestion by: admin on 2018-12-18 02:30:15
Hi there~ You can refer to the Arduino code here ### https://github.com/Seeed-Studio/Wio_LTE_Arduino_Library/blob/master/examples/Check_battery/Check_battery.ino ###RegardsAnswer by: admin on 2018-12-18 02:30:15
Question by: admin on 2018-12-18 02:29:49
Hi there~ You need to buy an SIM card for the LTE service. RegardsAnswer by: admin on 2018-12-18 02:29:49
Please respond to the question about the SIM, does it need sim provisioning? also will it work on AT&T network?Question by: admin on 2018-12-18 02:29:40
Hi there~ This module neeeds the SIM card for call and short message serve.But you can use other fuctions such as GNSS without SIM card. RegardsAnswer by: admin on 2018-12-18 02:29:40
Hi I'm interested to know if wio can connect internet cann a webservice and receive json information. I'm interesed to know if you have a battery system can connect to wio but can be powered fron a 12/24v battery car. thanksQuestion by: admin on 2018-12-18 02:29:39
<p>Hello,</p><p>1.Wio LTE could only be a client,and for more information please go to <a href="http://wiki.seeedstudio.com/Wio_LTE_Cat.1/#play-with-socket-tcpudp-client">http://wiki.seeedstudio.com/Wio_LTE_Cat.1/#play-with-socket-tcpudp-client.</a></p><p>2.When considering receive json information,there is no doubt that espruino is the best.Arduino with several open source libraries can also work.</p><p>3.Sorry we have not ,but you can buy one from amazon,like this https://www.amazon.co.uk/Charger-Voltage-Current-Cigarette-Compatible/dp/B015C0FB24<br></p>Answer by: admin on 2018-12-18 02:29:39
Question by: admin on 2018-12-18 02:21:13
Actually, you can use MQTT with Espruino, please check here: http://www.espruino.com/MQTTAnswer by: admin on 2018-12-18 02:21:13
Question by: admin on 2018-12-18 02:21:11
Hi Dear Customer, the blink led is vcc 3.3v, NOT reset led. thanks. BillAnswer by: admin on 2018-12-18 02:21:11
Question by: admin on 2018-12-18 02:20:57
Thanks for your reply, I ordered it.Answer by: admin on 2018-12-18 02:20:57
Question by: admin on 2018-12-18 02:20:37
Hi Dear Customer, Here is the EU version. https://www.seeedstudio.com/Wio-LTE-EU-Version-4G%2C-Cat.1%2C-GNSS%2C-Espruino-Compatible-p-2998.html thanks. BillAnswer by: admin on 2018-12-18 02:20:37
Can I get exact time information with this board? I am wondering if I will still need to get 'Grove - High Precision RTC' separately.Question by: admin on 2018-12-18 02:20:07
Hi Dear Customer, if we use the STM32F412 RTC with Espruino IDEAnswer by: admin on 2018-12-18 02:20:07