Loading...

Wio Terminal: ATSAMD51 Core with Realtek RTL8720DN BLE 5.0 & Wi-Fi 2.4G/5G Dev Board with Free Course

SKU
102991299
Rating:
98% of 100

Compatible with Arduino and MicroPython, Wio Terminal is an ATSAMD51-based microcontroller with both Bluetooth and Wi-Fi connectivity powered by Realtek RTL8720DN. Currently wireless connectivity is only supported by Arduino. More than just a single embedded functional module, Wio Terminal itself is integrated with a 2.4” LCD Screen, onboard IMU(LIS3DHTR), microphone, buzzer, microSD card slot, light sensor, infrared emitter(IR 940nm). All of these practical add-ons are carefully housed in a compact enclosure, making it an efficient and product-ready product. Equipped with Raspberry Pi 40-pin GPIO, it can be mounted to a Raspberry Pi as a slave device.

$36.90
In stock
  • 10+: $30.90
-
+

PRODUCT DETAILS

Key Features

  • Powerful MCU: Microchip ATSAMD51P19 with ARM Cortex-M4F core running at 120MHz

  • Reliable Wireless Connectivity: Equipped with Realtek RTL8720DN, dual-band 2.4Ghz / 5Ghz Wi-Fi

  • Highly Integrated Design: 2.4” LCD Screen, IMU and more practical add-ons housed in a compact enclosure with built-in magnets & mounting holes

  • Raspberry Pi 40-pin Compatible GPIO

  • Compatible with over 300 Plug&Play Grove modules to explore with IoT

  • USB OTG Support

  • Support Arduino, CircuitPython, Micropython, ArduPy(What is ArduPy?), AT Firmware, Visual Studio Code

  • Azure Certified Device: Sense and tag real-world data and visualize through Azure IoT Central 

  • TELEC certificated


Description

The Wio (Wireless Input and Output) platform (Wio Link, Wio Nodes,etc.) was first introduced to the world at the end of 2015 by Seeed. 

Meet our new member: Wio Terminal is compatible with Arduino and Micropython, built with an ATSAMD51 microcontroller with wireless connectivity supported by Realtek RTL8720DN. Its CPU speed runs at 120MHz (Boost up to 200MHz). Realtek RTL8720DN chip supports both Bluetooth and Wi-Fi providing the backbone for IoT projects. The Wio Terminal is Highly Integrated with a 2.4” LCD Screen, there is an onboard IMU(LIS3DHTR), microphone, buzzer, microSD card slot, light sensor, and infrared emitter(IR 940nm)

There are built-in magnets and two mounting holes on the well-designed enclosure, allowing you to set up your IoT project without hassle.

On top of that, it also has two multifunctional Grove ports for connecting with over 300 modules and Raspberry Pi 40-pin compatible GPIO for tons of Pi HAT add-ons, which means there are endless IoT possibilities you can create with this tiny device! 

With Wio Terminal, you can: 

  • Sense and tag the Real-World data with over 300 Groves created by Seeed and visualize through Azure IoT Central Platform to create an end-to-end IoT project

  • Use a 100% open-source Hardware in a pythonic way

  • Build your program interpreter starting from 90% with LCD screen and compact enclosure

  • Create embedded GUI with easy-to-use graphical elements and beautiful visualized editing tools.

Wio Terminal Based IoT Scenario Kits with step-by-step tutorials

 

Hello World of AI

Powered by TinyML and Wio Terminal, Paired up with Edge Impulse and Azure IoT, your will find an easier way to navigate the ever-changing landscape of their AIoT journey. 

Connecting the Wio Terminal to Azure IoT Central

Wio Terminal is an Azure certified device, not only can the artificial nose sense and tag the scents you want to know in the air, but everything can be analyzed and visualized in real-time through Azure IoT Central. More importantly, you can automatically trigger rules when, for example, a bad smell is being detected, therefore allowing the nose to be much smarter than if it were just a standalone, offline, device.


Connecting the Artificial Nose to Azure IoT Central – Real-time telemetry.

What other cool things can you play with Wio Terminal?

  • Artificial Nose that can Discern Different Kinds of Rum or ScotchTV

  • Affordable IR Thermal Imaging Camera

  • Remote Controller

  • Cost-effective Pulse Oximeter

  • Weather Forecast Monitor

  • Run TinyGO on Wio Terminal

  • Printer

  • GPS Navigator

  • Water Level Detector

Applications

  • Python Terminal Device

  • Data Collection Machine Learning powered device

  • Hand-held analyzer 

  • Retro Gaming Device

  • IoT Controller

  • Smart Robot for Education

  • IoT application quick prototyping

  • Slave device / Accessories for Raspberry Pi

 

Collaborate With the Worldwide Community! 

Wio Terminal Classroom

In this show, our engineer Lakshantha will explain how to use Wio terminal along with the software and present you fun demos as well! In this episode, you will learn about how to draw text strings by using the coordinate system and will learn to display "Hello World!" at the end of the video! 

Stay tuned with our show and we hope this helps you to gain more knowledge on how to program with the Wio Terminal!

Fully Open-source Manufacturing Process

As a fully open-source device, Wio Terminal development will continue to optimize its performance and every update will be publicized on our blog. We are also making a series of Vlog about the fully open-source manufacturing process of Seeed product. From hardware and software development to each step of manufacture and testing, you can find all you want to know about Wio Terminal, check now!

Pinout Diagram

Wio Terminal Pin Out Overview by Seeed
Wio Terminal Pin Out Overview by @matsujirushi12

Hardware Overview

Setup, Documentation, and Support

Technical Specifications

Main Chip

Manufacturer Part Number

ATSAMD51P19

Core Processor

ARM® Cortex®-M4F running at 120MHz

Memory

4 MB External Flash, 192 KB RAM

Maximum Speed

200MHz

External Flash

4MBytes

Operating Temperature

-40°C ~ 85°C (TA)

LCD Screen

Resolution

320x240

Display Size

2.4inch

Drive IC

ILI9341

Wireless Connectivity

Manufacturer Part Number

RTL8720DN

KM4 CPU

ARM® Cortex®-M4F @ 200MHz

KM0 CPU

ARM® Cortex®-M0

Wi-Fi

802.11 a/b/g/n 1x1, Dual Band 2.4GHz & 5GHz

Bluetooth

Support BLE5.0

Built-in Modules

Accelerometer

LIS3DHTR

Microphone

1.0V-10V -42dB

Speaker

≥78dB @10cm 4000Hz

Light Sensor

400-1050nm

Infrared Emitter

940nm

Interface

MicroSD Card Slot

Maximum 16GB

GPIO

40-PIN (Raspberry Pi Compatible)

Supported Protocol

SPI, I2C, I2S, ADC, DAC, PWM, UART(Serial)

Grove

2 (Multifunction), for Digital, Analog, I2C, and PWM

FPC

20-Pins

USB Type-C

Power & USB-OTG

Operation Interface

5-Way Switch

Power/Reset Switch

User-defined button *3

Enclosure

Mouting

Built-in magnets and two mounting holes

Dimension

72mm*57mm*12mm

Materials

ABS+PC

Software Support

Arduino

MicroPython

ArduPy

AT Firmware

Visual Studio Code

CircuitPython ( How to run CircuitPython on Wio Terminal?)

Part List

  • Wio Terminal
  • USB Type-C Short Cable
  • User Manual

 


Distributors

秋月電子通商(JAPAN)                                                          Digi-Key Corporation(GLOBAL)

Mouser Electronics, Inc(GLOBAL)                                       Distrelec(Europe)

BOTLAND B. DERKACZ SP.J.(Poland)                               BotShop(South Africa)        

ECCN/HTS

HSCODE 8543709990
USHSCODE 8471410150
UPC
FCC 1
CE 1

LEARN AND DOCUMENTS

Learn

This is the wiki page for this product, which will show you how to use the product, as well as details about the software and hardware.
Wio Terminal can run as USB-Host and use USB devices
Using PlatformIO to develop Wio Terminal
Let's see who could be the "Statue" in front of Wio Terminal and Grove - Mini Lidar Challenge of highi degree of accuracy and precision.
This project is going to introduce how this Grove-Analog Microphone works via Serial Port and Wio Terminal!
Since the release of Wio Terminal, we have seen many creative projects from the community. We collected various projects in this post and hope some of them will inspire you!
Grove - Thermal Imaging Camera IR Array (MLX90641) with Wio Terminal
Lakshantha will explain how to use Wio terminal along with the software and present you fun demos as well! So we request you to stay tuned with our show and we hope this helps you to gain more knowledge on how to program with the Wio Terminal!
Edge Impulse enables developers to create the next generation of intelligent device solutions with embedded Machine Learning. Machine Learning at the very edge will enable valuable use of the 99% of sensor data that is discarded today due to cost, bandwidth or power constraints.
Monitoring basement to make sure humidity does not rise too high and alert to check if dehumidifier bucket is full.
Porting Arduboy to SAMD51 MCU and ILI9341 TFT display using Wio Terminal.
This course is designed to introduce beginners to the basics of Embedded Machine Learning with Wio Terminal and Codecraft graphical programming. Course content features seven detailed step-by-step projects.
You can visit here to see the video about how to use graphical programming Codecraft to learn TinyML.
Biofloc fish project monitoring. Water quality maintenance and monitoring in any aquaculture are the essential practices aiming at the success of the growing cycles.
Due to quarantine obligations, many teachers couldn't make assigned experimental work. Build here a nice lab assistant for remote lessons.
The Air Quality Terminal can be used as an indoor air quality meter to monitor VOCs, CO, NO2, C2H5CH, Temp, and Humidity.
This hackster.io shows how to use Seeedstudio Wio Terminal to make a 2.4 GHz and 5 GHz dual-band WiFi analyzer. (Author: @moononournation)
Display a decibel meter on Wio Terminal with an accurate measurement!
Read the cycling speed, rotation speed and oil temperature, and other information, displayed on the Wio Terminal screen.
This allows you to use Wio Terminal as the core of an IoT device and able to control hardware from phones very easily!
This demo is displaying the face expression, and it uses the servo as the neck to torsion head.
WioTerminal with a CO2 sensor to measure the indoor air quality and remind to ventilate the room. Useful IoT device - 2020 Corona Pandemie.
3 accelerations monitoring using internal IMU sensor (text display mode, graph mode).
Seeed Wio Terminal have new WiFI and Bluetooth Firmware based on eRPC a.k.a Embedded Remote Procedure Call that supports 5Ghz WiFi and BLE.
Wio terminal is a very good product that comes from Seeed, let's get to see what included in the box!
The video explains in detail how we proceeded to design a benchmark that would provide reliable values ​​both for Arduino and for boards compatible with fast Arm microprocessor onboard.
we have gathered all helpful resources for Wio Terminal together in this blog, covering various tutorials, software/hardware updates, reviews, and projects, and will keep updating weekly.

SHARED BY USERS

REVIEWS

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
  1. Product Quality
    100%
    built CO2 monitor using it
    I wanted to build a simple CO2 monitor at my house when I found out that the indoor air quality is not so good at my home especially when winter comes and we often keep the door closed. And I found a project using this little device, bought one (and CO2 sensor of course), followed the instruction, and set up - and now I have a nice-looking little air quality monitor, built by myself, and totally programmable!
    By
  2. Product Quality
    80%
    Nice product with detailed instructions
    Nice product with detailed instructions. Suitable for beginners. Hope you can make a battery case or something to power it so it can be used outdoor once the programming is finished.
    By
  3. Product Quality
    100%
    anyone with little or no programming background can make his/her very first IoT project with almost no effort.
    This might sounds a little bit crazy - but I think this board is the future of IoT, with which anyone with little or no programming background can make his/her very first IoT project with almost no effort!
    By
  4. Product Quality
    100%
    good for people who want to have some fun time with IoT without too much hard work.
    Bright LCD, well-designed case, rich add-ons including Infrared Emitter, three buttons, 5-way joystick, light sensor, making it easier to devlop your IoT project. I personally think that learning how to soldering and how to use jumper wires are also important for beginners, but this device is still good for people who want to have some fun time with IoT without too much hard work.
    By
  5. Product Quality
    100%
    I like the idea of Ardupy!
    Apart from Arduino, you can use Python or TinyGo. And I like the idea of Ardupy! Although it hasn't been fully developed yet. Hope you guys don't give up on it. LOL
    By

FAQ

Items 6 to 10 of 26 total

Show per page