MDBT40ANT is a BT4.0 & BT4.1 stack (Bluetooth low energy or BLE) ,ANT module designed based on Nordic nRF581822 solution.
Dual Transmission Mode of BLE & ANT upon customer preference.
Compact size with (L)18x(W)10x(H)3.2mm
Low power requirements, ultra-low peak, average and idle mode power consumption.
Compatible with a large installed based of mobiles phones, tablets and computers.
Fully coverage of wireless application.
Personal Area Networks
Health/fitness sensor and monitor devices
Key-fobs + wrist watch
Remote control toys
Environmental sensor networks
Interactive entertainment devices
2.4GHZ transceiver: -93dbm sensitivity in Bluetooth low energy mode; TX Power -20 to +4dbm; RSSI (1db resolution)
ARM Cortex – M0 32 bit processor ; Serial Wire Debug (SWD)
S200 and S300 series SoftDevice ready
Memory: 256kb or 128kb embedded flash program, memory ; 16kb RAM
Support for non-concurrent multiprotocol operation : On-air compatibility with nRF24L series
Flexible Power Management : Supply voltage range 1.8V to 3.6V; 2.5us wake-up using 16MHz RCOSC; 0.6uA @ 3V OFF mode; 1.2uA @ 3V in OFF mode + 1 region RAM retention; 2.6uA @ 3V ON mode, all blocks IDLE
8/9/10 bit ADC- 8 configurable channels
31 General Purpose I/O Pins
One 32bit and two 16bit timers with counter mode
Two-wire Master (I2C compatible)
CPU independent Programmable Peripheral Interconnect (PPI)
Quadrature Decoder (QDEC)
AES HW encryption
Real Timer Counter (RTC)
1x MDBT40ANT -- NRF51422 based BLE module
Free shipping on your first order over $50 or more. Discounted items included!