Raspberry Pi Camera v2 is the new official camera board released by the Raspberry Pi Foundation. It carries an 8 megapixel Sony IMX219 image sensor with high resolution and great preformance, and is compatible with most of SBCs or Dev boards which have a standard CSI(Camera Serial Interface).
- High quality: Intergate an 8 megapixel Sony IMX219 image sensor
- High resolution: Capable of 3280 x 2464 pixel static images
- Great performance: Capture video at 1080p30, 720p60 and 640x480p90
- Wide compatibility: Compatible with most of SBCs or Dev boards that have standard CSI
Raspberry Pi Camera Module V2 is a new official camera board released by Raspberry Pi Foundation. It carries an 8 megapixel Sony IMX219 image sensor which has a great performance in catching the high resolution of images and videos. The image sensor can output up to 3280x2464 pixel static images ,1080p30, 720p60 and 640x480p90 video.
For the interface that connects the board, Raspberry Pi Camera has the standard CSI(Camera Serial Interface) which can be compatible with most of SBCs or Dev boards like Raspberry Pi 4, NVIDIA Jetson Nano and Raspberry Pi Zero, etc. But you need a Camera Cable for Raspberry Pi Zero to adapt the Pi Zero to this camera. As a matter of fact, the Raspberry Pi Camera has wide compatibility.
Comparison Between the Existing Raspberry Pi Camera Modules
|Camera Module v1||Camera Module v2||High Quality Camera|
|Still resolution||5 Megapixels||5 Megapixels||12.3 Megapixels|
|Video modes||[email protected]
|Sensor||OmniVision OV5647||Sony IMX219||Sony IMX477|
|Sensor resolution||2592 × 1944 pixels||3280 × 2464 pixels||4056 x 3040 pixels|
|Sensor image area||3.76 × 2.74 mm||3.68 x 2.76 mm
(4.6 mm diagonal)
|6.287mm x 4.712 mm
|Pixel size||1.4 µm × 1.4 µm||1.12 µm x 1.12 µm||1.55 µm x 1.55 µm|
|Focal length||3.60 mm +/- 0.01||3.04 mm||depends on lens|
|Horizontal field of view||53.50 +/- 0.13 degrees||62.2 degrees||depends on lens|
|Vertical field of view||41.41 +/- 0.11 degrees||48.8 degrees||depends on lens|
|Focal ratio (F-Stop)||2.9||2.0||depends on lens|
|Size||25 × 24 × 9 mm||25 x 23 x 9mm||38 x 38 x 18.4mm
- Chip type: Sony IMX219
- Resolution for image: 3280x2464
- Resolution for video: 1080p30, 720p60 and 640x480p90
- Size: 25mm x 23mm x 9mm
- Connects to the Raspberry Pi board via a short ribbon cable (supplied)
- Camera v2 is supported in the latest version of Raspbian, Raspberry Pi's preferred operating system
- 1x Raspberry Pi Camera Module V2
- 1x Ribbon cable
|Dimensions||120mm x75mm x23mm|
LEARN AND DOCUMENTS
SHARED BY USERS
A great hobby camera with Consistent picture qualityExcellent for its purpose. This camera is exactly as described. Very small but very good quality. It's a quality 1080 image/video . Good Buy.
More natural colors than the early camera module V1.3With Raspberry Pi Camera Module V2, I was able to shoot with natural colors with all auto settings. Of course, the number of pixels has increased from 5 million pixels to 8 million pixels compared to the previous version, so it seems that the detail of the image is also improved. Since it is small and lightweight, it can be attached to any shooting equipment with a little ingenuity.
excellent Raspberry Pi CameraIt was an excellent one that did its best even in the backlight.Even though it is small, it will do its best.
Very compact and easy to set upVery compact and easy to set up. Works great with the Pi. Good quality image
FastIt is so fast from us warehouse