Laser Cutting Service
Do you sometimes think about getting your electronics dressed? Well, with this service, you can get started with making the enclosure quickly and economically for your project
Do you sometimes think about getting your electronics dressed? Well, with this service, you can get started with making the enclosure quickly and economically for your project.
Read this first
- We can ONLY do Laser cutting for now. Any Laser engraving is NOT accepted.
- One service, one design file.
- Submit your design in either EPS or CDR format. Your design file must be less than 10mb.
- The parts need to be flat. If you want to make 3D parts, you could combine multiple 2D pieces.
- If you have parts that taper to a thin, sharp point, make sure the the two converging lines of the sharp corners are no less than 0.05cm apart.
- Plastic thickness may vary by + or – 10%.
- The plastic sheets come with a protective masking on both sides to protect its surface during the cutting.
- Your order will be processed and shipped in 3-4 days (Excluding the Chinese Festival).
We begin with one material. There is no doubt we will gradually add more materials into the list. If you want some other colors which are not listed here, welcome to tell us by dropping a line to order(at)seeedstudio.com
The Difficulty is mainly decided by the Laser cutting time. Make sure processing time of your design is within the range of the service you select.
|Length of Cutting line||Processing Time||Difficulty|
|Below 60cm||Below 2min||Easy|
|Between 60cm and 180cm||Between 2min and 5 mins||Normal|
|Over 180cm||Over 5 mins|| Hard |
The Sheet maximum dimensions for each price bracket are just that, the maximum. The outline of your drawing must be smaller than the dimensions of the service you select.
You can select the number in the quantity box to make your design from a single material multiple times. We offer 5% discount for 50 and
10% for 100
Laser Cutting Pricing
|Material Number||Sheet Dimension||Difficulty||Price|
|A-T-1||10cm Max* 10cm Max||Easy||$1.5|
|A-T-1||10cm Max* 10cm Max||Normal||$2.5|
|A-T-1||10cm Max* 10cm Max||Hard||$3.5|
|A-T-1||20cm Max* 20cm Max||Easy||$2.8|
|A-T-1||20cm Max* 20cm Max||Normal||$4.3|
|A-T-1||20cm Max* 20cm Max||Hard||$5.8|
|A-N-1/A-N-2/A-N-3/A-N-4/A-N-5/A-N-6||10cm Max* 10cm Max||Easy||$1.8|
|A-N-1/A-N-2/A-N-3/A-N-4/A-N-5/A-N-6||10cm Max* 10cm Max||Normal||$3.0|
|A-N-1/A-N-2/A-N-3/A-N-4/A-N-5/A-N-6||10cm Max* 10cm Max||Hard||$4.2|
|A-N-1/A-N-2/A-N-3/A-N-4/A-N-5/A-N-6||20cm Max* 20cm Max||Easy||$3.4|
|A-N-1/A-N-2/A-N-3/A-N-4/A-N-5/A-N-6||20cm Max* 20cm Max||Normal||$5.2|
|A-N-1/A-N-2/A-N-3/A-N-4/A-N-5/A-N-6||20cm Max* 20cm Max||Hard||$7.0|
If you want some other size which are not listed here, welcome to tell us by dropping a line to order(at)seeedstudio.com
1. Purchase fusion Laser Cutting Service from online store and check out. An order number will be provided in confirmation email from Seeed Studio Bazaar.
2. To make sure orders processed smooth and accurately, compress your design file into a zip file named L(your order number). For example: L14756.rar)
3. Send your file to Laser(at)seeedstudio.com
To avoid the troubleshooting afterwards, please check over your design as thoroughly as possible before Sending it to us. We will notify you to fix up the problem if your design fail to meet the requirements.
|Dimensions||0mm x0mm x0mm|
Write Your Own Review