Grove Temperature and Barometer Sensor (BMP280) - Supports I2C and SPI
Grove - BMP280 I2C and SPI Barometric and Temperature Sensor is built around Bosch BMP280. It is a low-cost and high-precision environmental sensor measures the temperature and barometer. Grove - BMP280 supports both I2C and SPI communication and we provide the BMP280 Arduino library.
- 10+: $7.70
High accuracy, the absolute accuracy of ±1.0 hPa for pressure measurement and ±1 accuracy for temperature measurement
Easy-to-use Grove Compatible Interface
Supports both I2C and SPI communication
Can be used as an altimeter with the accuracy of ±1 meter
The Grove BMP280 Barometer Sensor is built around Bosch BMP280, it is a low-cost and high-precision environmental sensor measures the temperature and barometer. This sensor supports both I2C and SPI communication and we provide the BMP280 Arduino library.
Grove BMP280 provides precise measurements of barometric pressure and temperature in the environment. The air pressure can be measured in a range from 300 hPa to 1100hPa with ±1.0 hPa absolute accuracy. As for the temperature, the sensor works perfectly for temperatures between - 40℃ and 85℃ with an accuracy of ±1℃.
Owing to its high accuracy on measuring the pressure, and the pressure changes with altitude, we can calculate the altitude with ±1 meter accuracy, which makes it a precise altimeter as well. Another great thing about this module is that you don’t even need to worry about the I2C collisions as it provides both I2C and SPI interfaces. To use SPI, simply de-solder the bonding pads on the back. If you go with I2C, the board also provides 2 I2C addresses for you to select as you want.
BMP280 vs. BME280 vs. DPS310
|Pressure Range||300 ~ 1100 hPa||300 ~ 1100 hPa||300 ~ 1200 hPa|
|Temperature Range||-40 ~ 85 ℃||-40 ~ 85 ℃||-40 ~ 85 °C.|
|Pressure Precision||-||-||± 0.002 hPa (or ±0.02 m)|
|± 1 hPa (or ±8 m)||± 1 hPa (or ±8 m)||± 1 hPa (or ±8 m)|
|± 0.12 hPa||± 0.12 hPa||± 0.06 hPa (or ±0.5 m)|
|Pressure Resolution||0.18 Pa||0.18 Pa||0.06 Pa|
|Humidity||-||0 ~ 100%||-|
As the sensor is quite sensitive to the environmental conditions, please DO NOT touch it with your fingers.
- Weather Station and Weather Sensing
- Measure Temperature, Pressure, and Altitude
Supply Voltage: 5V or 3.3V
Current Consumption: 0.6 mA
Barometric Pressure Measure
- Range: 300 – 1100 hPa
Accuracy: ±1.0 hPa
- Range: -40 to 85
- Accuracy: ±1
Interface: I2C and SPI
Grove Port: I2C (selectable address at 0x77(default) and 0x76)
Dimensions: 20mm x 40mm
|Dimensions||130mm x90mm x8.5mm|
|Grove - Barometer Sensor (BMP280)||1|
LEARN AND DOCUMENTS
SHARED BY USERS
from order viewThis user did not leave any comments.
Justo lo que estaba buscandoy lo genial es que lo puedes configurar
very accurateUse this sensor to monitor the temperatures in my garage workshop
BMP280The resolution of the BME280 is ahead of the BME180
very preciseI used this and an Arduino micro controller to measure Temperature, and this sensor is very precise.