SenseCAP S2100 LoRaWAN Data Logger

SenseCAP S2100 LoRaWAN Data Logger is an easy-to-deploy, industrial-grade LoRaWAN sensor hub that can support 100+ industrial sensors including various sensor types such as 0~5V / 4~20mA / RS485. 

attention icon

Early-bird discount available before May 31, 2022.

Special Price $49.00 Regular Price $69.00
In stock


About "IoT into the Wild"

The theme of Seeed's new product launch in 2022 is "IoT into the Wild". Learn more low-power sensors to ultra-long-range gateways fully featuring Edge AI and LoRaWAN.

About SenseCAP

Among the first launch of the Seeed industrial IoT (IIoT) product series, SenseCAP is focusing on wireless environmental sensing applications: smart agriculture, precision farming, and smart city, to name a few. It consists of hardware products (sensors, data loggers & gateways, etc.), software services (SenseCAP portal, mobile App, open dashboard), and an API for device & data management.

About S210X Series

The next generation of LoRa sensors of SenseCAP, the S210X series offers users' industrial long-distance data acquisition via LoRaWAN. The S210x series is suitable for a wide variety of different industries such as smart agriculture, smart buildings, and industrial control.

With the IP 66 rating, - 40 ~ + 85C ° operating temperature, and built-in 19AH high-capacity battery, combined with the devices’ low power consumption, the S210x series can operate in harsh outdoor environments for up to 10 years with a range of up to 10km. The built-in Bluetooth facilitates setup and greatly reduces large-scale deployment costs. Users can focus on application development with the easy set-up, and start retrieving data in a few steps. Just install the device, bind it using the QR code and configure the network, then data can be viewed from the SenseCAP portal, which supports popular IoT protocols such as HTTP and MQTT.


  • Support LoRaWAN protocol v1.0.3 Class A

  • Supports 0~5V and 4~20mA input with errors less than 0.2%

  • Supports RS485 Modbus-RTU protocol

  • Quick configuration: User-friendly set-up with built-in Bluetooth 5.0

  • Power supply: 12V DC or a built-in 19mAh battery

  • Industrial design:-40 ~ 85℃ operating temperature and IP66 rating

  • Easy deployment: Easy to mount via brackets

  • Efficient  integration: SenseCAP cloud services with Open API support further development

  • Weather-resistant: Suitable for indoor, outdoor, and harsh environments such as high UV exposure, heavy rain, dusty conditions, etc.

  • Multi-platform: Compatible with multiple NS (Helium, TTN) and IoT platform

  • Supports 100+ industrial sensors


SenseCAP S2100 LoRaWAN Data Logger is an easy-to-deploy, industrial-grade sensor hub that can support 100+ industrial sensors including various sensor types such as 0~5V / 4~20mA / RS485(Modbus-RTU). With built-in Bluetooth, you can configure the signal parsing algorithm as quickly as possible. Featuring high expansibility, stability, and high EMC robustness, this sensor is suitable for industrial applications such as smart livestock, outdoor farms, smart city, greenhouses, and more.

SenseCAP S2100 incorporates a built-in LoRa Module on LoRa-E5 for long-range transmission, a terminal for sensor connection, and a standard Li-SOCl2 battery. To minimize the power consumption, the device wakes up, transmits the collected temperature and humidity data to the gateway, and then goes back to sleep.

Both 12V DC power supply and battery power supply are supported. If 12V DC is connected to an external power supply, the external power supply is preferred and the battery is used as the backup power supply. The device supports 3V and 5V sensors, which can support the 12V sensor when the PCBA is powered by 12V DC.

The sensor can quickly replace a new battery by unscrewing three screws. The battery is a standard Li-SOCl2 battery (type: ER34615) that can purchase from Amazon and other platforms.

The built-in Bluetooth facilitates setup and greatly reduces large-scale deployment costs, and you can use the App to configure some parameters, like sensor type, payload, frequency, and interval. In addition to setting parameters, the App also supports firmware updates, device management, and data viewing.

3 Steps to Get the Data based on SenseCAP Portal

System Architecture

SenseCAP Architecture

The sensor must be used with SenseCAP LoRaWAN Outdoor Gateway.

Helium Network Architecture

The sensor can be used with the M1M2, and other Helium gateways.

Standard LoRaWAN Architecture

The sensor can be used with any standard LoRaWAN gateway.


  • Smart Agriculture

  • Smart Buildings & Cities

  • Smart Industrial Control

  • Office/Home Monitoring

  • Environmental Protection

  • Other Wireless Sensing Applications


Current Input 4 to 20 mA (2 channel)
Voltage Input 0 to 5 V (2 channel)
RS485 RS485 Modbus-RTU Protocol
General Parameters
Product Model SenseCAP S2100
Microcontroller LoRa-E5
Support Protocol LoRaWAN v1.0.3 Class A
Built-in Bluetooth App Tool to change parameters and set data conversion algorithm
LoRa Channel Plan IN865/EU868/US915/AU915/ AS923/KR920/RU864**
Max Transmitted Power 19dBm
Sensitivity [email protected] BW=125KHz
Communication Distance 2 to10km (depending on gateway antenna and environments)
IP Rating IP66
Operating Temperature -40 to +85 °C
Operating Humidity 0 to 100 %RH (non-condensing)
Device Weight 280g
Certification CE / FCC / RoHS
Battery (Contained in equipment)
Battery Life Up to 10 years (Depends on the power consumption of the sensor)
Battery Capacity 19Ah (non-rechargeable)
Battery Type Standard D-size SOCl2 Battery

* Hardware supports all interfaces, but the software supports only one interface type to collect data simultaneously. For example, if the analog interface is selected, the RS485 interface cannot be used at the same time.

** A device supports different frequencies and can be configured via the Bluetooth App.


Part List


KA4*20mm Self-drilling Screw *4
Waterproof gasket*1


HSCODE 9031809090
CE 1




Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account