reTerminal CM4104032- Embedded Linux with Raspberry Pi CM4 and 5-Inch Capacitive Multi-Touch Screen HMI
reTerminal is powered by a Raspberry Pi Compute Module 4 (CM4) which is a Quad-Core Cortex-A72 CPU running at 1.5GHz and a 5-inch IPS capacitive multi-touch screen with a resolution of 720 x 1280. It has a sufficient amount of RAM (4GB) to perform multitasking and also has a sufficient amount of eMMC storage (32GB) to install an operating system, enabling fast boot-up times and a smooth overall experience. It has wireless connectivity with dual-band 2.4GHz/5GHz Wi-Fi and Bluetooth 5.0 BLE.
Now, reTerminal E10-1, the industrial high-speed expansion Board for reTerminal, is ready!
- Integrated modular design with high stability and expandability
- Powered by Raspberry Pi Compute Module 4 (CM4) with 4GB RAM & 32GB eMMC
- 5-Inch IPS capacitive multi-touch screen at 1280 x 720 and 293 PPI
- Wireless connectivity with dual-band 2.4GHz/5GHz Wi-Fi and Bluetooth 5.0 BLE
- High-speed expansion interface and rich I/O for more expandability
- Cryptographic co-processor with secure hardware-based key storage
- Built-in modules such as accelerometer, light sensor, and RTC
- Gigabit Ethernet Port and Dual USB 2.0 Type-A ports
- Pre-installed heatsink for higher performance
- 40-Pin Raspberry Pi compatible header for IoT applications
- reTerminal is Microsoft Azure Certified
- Remote management support from partner Mender.io (OTA software updates, configure, troubleshoot, remote terminal access)
- The best Raspberry Pi device with a 5-Inch multi-touch screen
- High-performance Raspberry Pi CM4 tablet
Meet reTerminal, The Next Generation of Human Machine Interface with you, and also a new member of our reThings family. This future-ready Human-Machine Interface (HMI) device can easily and efficiently work with IoT and cloud systems to unlock endless scenarios at the edge.
reTerminal CM4104032 is powered by a Raspberry Pi Compute Module 4 (CM4) which is a Quad-Core Cortex-A72 CPU running at 1.5GHz and a 5-inch IPS capacitive multi-touch screen with a resolution of 720 x 1280. It has sufficient amount of RAM (4GB) to perform multitasking and also has sufficient amount of eMMC storage (32GB) to install an operating system, enabling fast boot-up times and a smooth overall experience. It has wireless connectivity with dual-band 2.4GHz/5GHz Wi-Fi and Bluetooth 5.0 BLE.
reTerminal CM4104032 consists of a high-speed expansion interface and rich I/O for more expandability. This device has security features such as a cryptographic co-processor with secure hardware-based key storage. It also has built-in modules such as an accelerometer, light sensor, and an RTC (Real-Time Clock). reTerminal CM4104032 has a Gigabit Ethernet Port for faster network connections and also has dual USB 2.0 Type-A ports. The 40-pin Raspberry Pi compatible header on the reTerminal opens it for a wide range of IoT applications.
reTerminal CM4104032 is shipped with Raspberry Pi OS out-of-the-box. So, all you have to do is connect it to power and start building your IoT, HMI, and Edge AI applications right away!
Also, reTerminal is Microsoft Azure Certified!
You can also enable remote management support:
Follow our wiki to setup Mender Client on a reTerminal to access OTA updates from a Hosted or Self-Hosted Mender Server to enable remote management capabilities.
There are limitless possibilities with the reTerminal. It can be placed at the heart of an IoT/Edge system where you could connect a number of sensors to the reTerminal via different wireless protocols such as LoRa, Zigbee, Wi-Fi, Bluetooth, Sub-1G, and the reTerminal connected to the cloud via Ethernet, Wi-Fi, 5G/ 4G or connected to an edge server to store and process the data.
Modular Design for Expanded Function
As you can see, reTerminal has a modular design where you can expand this system by connecting different modules. You can connect it via industrial high-speed connector on the back or the 40-Pin GPIO connectors on the side, to ebale enable even more applications. Meanwhile, you can easily plug modules such as mic array & speaker, camera, industrial I/O, LoRaWAN, 5G/4G, and PoE to realize your ideas! It will be supported by an active community as well!
reTerminal has a high-speed expansion interface with a PCIe 1-lane Host, Gen 2 (5Gbps), USB 2.0 port, 28 GPIOs, and PoE. You can use this interface for industrial and more advanced scenarios! The official industrial high-speed expansion board, reTerminal E10-1 is coming out, which is fully compatible with the reTerminal where they can be simply connected through the industrial high-speed signal connector, you can refer to here for further information.
reTerminal is packed with rich interfaces on the side of the device while keeping the design to a minimum. It has a USB Type-C port for power input, a Gigabit Ethernet port for faster and reliable network access, a micro-HDMI interface that supports video output at 4K resolution with a frame rate of 60fps, and also has 2 USB Type-A ports.
reTerminal also features a 5-Inch IPS capacitive multi-touch screen with a resolution of 1280 x 720 and a pixel density of 293 PPI, providing high definition and rich colors. This resolution is 1.6 times higher than the most common resolution for 5-inch displays, which is 800 x 480. Also, comparing to TN displays, the IPS display on the reTerminal offers better viewing angles as well!
reTerminal has security features such as a cryptographic co-processor with secure hardware-based key storage. It also has protected storage for up to 16 keys, certificates, or data. It provides hardware support for symmetric sign, verify, key agreement – ECDSA. It has hardware support for symmetric algorithms, networking key management and secure boot.
- Embedded Linux Terminal Device
- Smart Factory
- Smart Warehouse
- Smart Home
- Machine Learning and Edge AI Applications
- IoT Controller
- Hand-Held Device
|Platform||Processor||Broadcom BCM2711 quad-core Cortex-A72 (ARM v8)|
|Frequency||64-bit SoC @ 1.5GHz|
|Technology||LPDDR4 with on-die ECC|
|Wireless||Wi-Fi||2.4GHz and 5.0GHz IEEE 802.11b/g/n/ac|
|Bluetooth||Bluetooth 5.0, BLE|
|Display||LCD||5-inch 720x1280 LCD|
|Touch Panel||Capacitive touch panel (support multi-touch)|
|Video||HDMI||1 x Micro HDMI output (up to 4Kp60 supported)|
|CSI||1 x 2-lane MIPI CSI camera interface|
|Multimedia||H.265 (4Kp60 decode)|
|H.264 (1080p60 decode,1080p30 encode)|
|OpenGL ES 3.0 graphics|
|Built-In Modules||Real-Time Clock||NXP Semiconductors PCF8563T|
|Low backup current; typical 0.25μA at VDD = 3.0 V and Temperature = 25 ℃|
|16-bit, ±2g/±4g/±8g/±16g dynamically selectable full scale|
|Secure Hardware-Based Key Storage, Asymmetric Sign, Verify, Key Agreement|
|Light Sensor||Levelek LTR-303ALS-01|
|Digital light sensor|
|Buzzer||≥85dB @10cm 2700±300Hz|
|External I/O||GPIOs||Up to 5 × UART|
|Up to 5 × I2C|
|Up to 5 × SPI|
|1 × SDIO interface|
|1 × DPI (Parallel RGB Display)|
|1 × PCM|
|1 × PWM channel|
|Up to 3× GPCLK outputs|
|1 × PCIe 1-lane Host, Gen 2 (5Gbps)|
|1 × USB 2.0 port (highspeed)|
|26 x GPIOs|
|Temperature||Operating Temperature||0 - 70°C( For the LCD Screen: 0 - 60°C)|
|Mechanical||Dimensions||140mm x 95mm x 21mm|
|Certificates||CE, FCC, TELEC(211-210815)|
For using the 40-Pin Raspberry Pi Compatible Header, please check the header orientation from the pinout diagram,
Before you attach a camera with the CSI 22 Pin cable to the board, please double-check the FFC contact pins are facing up.
1 x reTerminal
LEARN AND DOCUMENTS
SHARED BY USERS
from order viewThis user did not leave any comments.
from order viewVery solid build
from order viewIt is a product that meets future product development requirements.
from order viewGood documentation and quality, hardware is very well built and well presented
from order viewSeeedstudio manufactured-As expected from the documentation & advertisement of course. Good for practical use with CM4.