IoTea LoRa SmartAgriculture
PM2.5 PollutionVisualization WioLTE
PIR sensor is used for making motion detecting applications such as alarm burglar systems, visitor presence monitoring, light switches and robots
Who Viewed This Also Viewed
PIR(Passive Infrared Sensor) sensor is used for making motion detecting applications such as alarm burglar systems, visitor presence monitoring, light switches and robots. The Grove – mini PIR motion sensor is a compact, low power consumption and cost effective PIR sensor which is suitable for applications with relatively less detection distance requirement.
The detection distance in the datasheet is up to 3m to 5m, however 2m is the best detection distance that we recommend and 25℃ is the most suitable temperature.
The sensitivity of the sensor is adjustable, there is reserved pin out on the back of the board so that you can solder a slide rheostat to adjust the sensitivity. If you think the sensitivity is not enough, here is a trick, drag the plastic cap a little up will help enhance the sensitivity.
The PIR Motion Sensor Series includes several products that will meet your different needs:
Want to know more about how the PIR sensor works with Arduino and Raspberry pi, please click here to view the blog. If you need tutorials for operating the sensor, please click here to view the wiki.
Please note that the orientation can influence the sensitivity, for more accurate detection, please place the sensor as the picture below.
Low power consumption
Security Alarm System
Human Detection System
Grove - mini PIR motion sensor will work with the same library as Grove - PIR Motion Sensor. So, please refer to the wiki page of Grove - PIR Motion Sensor and download the library from there to get started with this sensor.
Unfortunately, the max Supply Voltage is 3.3V. Regards
Hi, there~The manual is written like this. if any question, you can go to Seeed's forum to find the anwser, Regards!